When USB hub is connected Sat P30 doesnt boot up

I recently purchased a Toshiba P30, in the USB port I connected an USB 2.0 HUB.
This to connect, printer, scanner, external harddisk etc., etc.
When the USB HUB is pluged in the USB port, the computer will not start up.
I must first disconnect the Hub before I can push the on/off button.
Can somebody help me and tell me what I must do to be able to start the computer
with the USB HUB attached to the notebook.
Manny thanks
Jos

Hello Jos
It is really not easy to say what the problem can be but in my opinion it is definitely because of HUB. You will not believe me but my colleague has Satellite P10 and two USB HUBs are connected to his unit and there is no problem at all. I dont know which one you have but if there is any possibility try to test it with other one.
Bye

Similar Messages

My 2011 macmini boots very slowly when d-link usb hub is connected.

I have a 2011 macmini that boots very slowly when my D-link 7 port usb hub is attached. The hub is the newest model and has three 3TB seagate external hdd's plugged in to it. Normally boot time is about 1 minute, with hub connected it's about 3+ minutes. Shut down time is also much slower when the hub is connected. If I unplug it, boot up and shutdown time is back to normal. Does anyone know if this is normal, or do I have a bad hub or external hdd's.

It's a bit normal, OSX checks or repairs most drives connected when booting.
Use Disk Utility to Repair the external Drives.
Also, Is Spotlight indexing these drives? Is Time Machine using any of them?
Have you tried one drive connected at a time to see if it's just one or 2 doing it?
Did you Install any Seagate Software?

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

That's not possible, it was designed to handle one device at a time.
I don't work for Cisco. I'm just here to help.

Could I use a USB hub to connection both a printer and an external hard drive to the time capsule?

I am planning on purchasing a new router. The Time Capsule looks amazing. However, I have Macs and PC's in my how. So, I need to know if I can connect a printer (for all computers) and external hard drive (for the PC's) by way of a USB hub on the Time Capsule. I've read that you can do this with the Air-Extreme.

Couple of comments:
You will need to use a powered USB hub to connect multiple devices to the USB port on the Time Capsule
The hard drive for use with the PCs will not be compatible for use with the Time Capsule if it is currently formatted for Windows NTFS, which it likely may be if you have been using with the PCs.
Same info applies to the AirPort Extreme.
The following hard drive formats would be supported:
Mac OS Extended (Journaled)
MS DOS FAT32

During setup HP PSC 2175v printer locks up XP computer when usb cable is connected.

During setup HP PSC 2175v all-in-one printer locks up XP computer when usb cable is connected. Only hard shutdown and restart to get computer working again works. How do you fix this issue?

The USB port on the PSC2175V may be defective or the XP USB port is defective.
Can you try the PSC2175V on another computer?
Check the XP device manager for any problems, do other USB devices work ok?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Can I use a USB hub to connect to multiple USB ports from one GPIB-USB-HS?

I have one instrument which has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple PCs to connect using USB hub at their respective USB ports? If so, how many PCs can I connect using the USB cable?
I have downloaded the latest NI-VISA from the website.
Solved!
Go to Solution.

You would first need a hub that allows you to switch between multiple pc's and then only one pc at a time would be connected and in control.
When you buy this special type of hub, one of the specs is how many pc connections it has.

Twin unpowered USB hub for connecting external HDD and iphone

I have a MBA and a powered Kensington 7 port USB hub which works great when I am either at home/in the office.
Is there an unpowered twin port USB hub that would allow me to connect both my WD myv passport 320gb external HDD and 3g iphone to my MBA when i am truly on the move?
thanks in advance
Message was edited by: NRG1970

Because those are both drawing power from the macbook air, it might be questionable, but any should do, but I haven't seen any 2 port hubs, only four port ones, and I tend to like Logiix, as their support is good and their products are good also, and they are fairly low profile.

XP Shutdown hangs when USB hub attached :(

I recently bought a Lenovo 3000 N500 notebook (running XP) , and love it. One slight problem though, I have a Belkin F5U271 USB Hub plugged into it all the time, on my desk, and everytime I shut down with it attached, I get as far as 'Windows is shutting Down...' and it just stays there, the fans stop, theres no hdd activity, and it doesnt happen if the hub is detached. I'm assuming its to do with phantom power through the USB, but any thoughts you guys?

I have the same problem when I leave my expresscard34 multimedia reader in the expresscard34 slot in my T400s with XP SP3.
please advise.

OS X kernel logs problem when USB flash drive connected.

Previously, my Creative Nomad Muvo TX (MP3 player/1GB USB memory stick) worked fine with my Intel Mac mini (10.4.8) until the latest EFI 1.1 update.
Now the USB drive does not mount or appear in finder. It is visible in the System Profiler in the USB section, but the disk utility does not see it.
While the USB stick is plugged in, the system logs the following line repeatedly:
Nov 26 21:32:39 kernel[0]: USBF: 2517.425 AppleUSBEHCI[0x3969000]::Found a transaction past the completion deadline on bus 253, timing out!
Booting in Windows XP (with bootcamp) and plugging in the USB memory stick works fine. So the USB stick and the Mac mini hardware is functioning.
Other USB 2 external harddrives are functioning properly in OS X.
I suspect that the latest Mac OS X or EFI 1.1 firmware update has spoilt my previously happy USB memory stick connection.
Any suggestions?
Thanks in adcvance.
Stephanus

Hi, Stephanus.
1. If Creative does not support that device with a Mac, then that should tell you something. Even if it worked in the past, since they don't support it, there's no guarantee that changes to Mac OS X would render it unusable as you've noted. With that kind of attitude from Creative, I'd think about switching to an iPod...
Since you can use it when booted into Windows with Boot Camp, you might want to consider running Parallels Desktop for Mac. This leverages the virtualization technology of the Intel chips, permitting you to run Mac OS X and Windows simultaneously, rather than having to boot into Windows with Boot Camp. Parallels is cheaper than buying an iPod.
2. The USB message you reported is essentially indicating that the OS detected a USB device but cannot talk to it. This is unlikely to be something you're going to work around, e.g. with Terminal.
3. If you want to pursue this further, you can:3.1. Install the USB debug kit for your version of Mac OS X. Apple provides a variety of Mac OS X USB Software Debug Versions that "are used to provide information about USB device and interface detection, driver and interface matching, driver loading and information generated as a result of normal and abnormal conditions." You could install the package corresponding to the version of Mac OS X you are running and this may help identify if the issue is a USB problem and the exact USB anomaly causing such.
3.2. Take what you've been able to lear from the USB debugger and do one or more of the following:• Join the Apple USB Mailing List. Once your registration is approved, submit a question including the enhanced output from the USB logger and requesting additional advice. That list is monitored by developers of USB devices. Posts are sometimes answered by Apple engineers.
• Join the Apple Developer Connection at the "free" level, then submit a bug report.
• Submit a Mac OS X Feedback.If Creative has their own forums, ala Discussions, you might also want to search or post there for similar reports.Unfortunately, that's about all I have to offer at this point: I don't have the Creative device and hence can't test it.
I think that Creative is disinterested in helping you is a key issue you need to consider.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

RMBP 15" 2013 won't connect to wifi when USB or Thunderbolt connected

Has anyone else noticed any issues connecting to wifi when they have a device plugged in to the USB or Thunderbolt ports? Mostly happens when turning on or waking from sleep. As soon as I removed the connected devices it connects to the wifi instantly! This has happened when I've had my Apple monitor connected via the Thunderbolt port and on a seperate occasion when my iPhone was connected to the USB.
Tis werid!
I'm running Mavericks OSX 10.9.2 on a 2013 15" rMBP :-/

Go to System Preferences > Network > Click the Cog Wheel > Set Service Order > Drag Airport to the top.

Network Configuration Window Freezes When USB NDIS Internet Connection Sharing and Ethernet Port Are Used Simultaneously

Current Setup:
Asrock Extreme 4 Z77 mobo with built-in Broadcom NetLink (TM) Gigabit Ethernet. Windows 8 Pro. Intel i5-3570k (using onboard Intel 4000 HD Graphics). RAID0- 2 OCZ Vertex 4's.
I will refer to this setup as my tower.
The Ethernet port works fine by itself. When I use wired tethering with my Android phone (Droid 4 running on 4.0.4 Ice Cream Sandwich), it works fine when nothing is connected into the Ethernet port in the mobo.
The issue arises when I try to connect both simultaneously. The network configuration window in windows basically freezes and I cannot really navigate it without a ~60 second delay at best.
I would like to be able to accept the internet from my Android via a USB tether and either bridge the connection or use the internet connection sharing service to route traffic through the unused Ethernet port on the mobo (either to another computer/xbox
or more desirably a switch/router to spread to the entire home network). I have extensively researched the issue of Windows 8 become slow and unresponsive when I attempt to do this and I have not found anyone with the exact problem. I am able to
do both the MAC bridge miniport (bridge 2 connections) and Internet Connection Sharing though a Windows Vista (home premium) Laptop I have. The difference between the laptop and the tower I am try to do this on is the laptop has a WIFI and Ethernet connection
while the tower only has the on-board Ethernet.
Do I have all the necessary equipment to accomplish this, or do I need to buy a PCIe WIFI card? If so could I get away with just getting a USB WIFI dongle?
Any help would be very appreciated.

I had the same problem and came here by searching.
Per Rosengren's method solved the problem, but he didn't say how to do it, so I'll try to explain step-by-step for anyone that may venture here.
Open Device Manager (right click on Computer > Manage > on the left side, under System Tools choose Device Manager)
Choose the problematic device in Network Adapters (for me it's called HTC Remote NDIS based device)
Right click on it and choose Update Driver Software...
Click Browse my computer for driver software
Click Let me pick from a list of device drivers
Uncheck the box Show compatible hardware
For the manufacturer, choose Microsoft Corporation
Now you will have two options:
- Remote NDIS based Internet Sharing Device
- Remote NDIS Compatible Device
I chose the second one and it solved the problem, but if it doesn't work you could try the other one. In my case, the driver that was being used was neither of these, but a special driver from Android SDK ADT bundle.
Pick one and click Next. If a dialog comes up, confirm by clicking Yes.
Wait a few seconds for the connection to restart. If it doesn't work, try disabling and reenabling USB tethering on the phone, or reconnect the USB cable.
I should also note that I'm using a custom Android ROM on HTC Wildfire S (unofficial Cyanogenmod). If you have a stock ROM with HTC Sense, maybe this method may not work and you'll need a proprietary HTC driver.

OS X crashing on reboot when USB Bluetooth device connected

After a very recent SW update to 10.4.5 OS X is crashing on reboot with a black screen of death when USB Bluetooth D-Link DWB-120M is connected. Crash is systematic if bluetooth device is connected. How do I correct the situation to be able to make use of the bluetooth USB device?
[email protected]

Hi, noordm. Welcome to the Discussions.
You wrote: "...crashing on reboot with a black screen of death..."Can you clarify what you mean by "black screen of death?"
For example, if you are seeing this message, that indicates a kernel panic.
If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Do i need a powered usb hub to connect my external hard drive and printer to my airport extreeme

I tried a usb hub from Belkin that is not powered. Is this why I cannot get my hard drive to work on my Airport Extreme?

I am assuming that you are using the newer "square" version of the AirPort Extreme, not the older "round" version.
The USB port on the AirPort Extreme is under powered. I have had to use a powered USB hub with any type of hard drive that I've ever used on the Extreme, even if the drive had its own power supply.
You might want to also check to make sure that the drive is formatted in Mac OS Extended (Journaled) or MS-DOS FAT32. The normal Windows format of NTFS will not work at the AirPort Extreme.

Why doesn't Wi-Fi turn OFF when USB Ethernet is connected?

When I get into the office, I connect my MacBook Air (2011/Lion) via USB Ethernet (we have Wi-Fi too).
When connected through USB Ethernet, my Wi-Fi stays connected as well.
Is it possible to have Wi-Fi turn off automatically when connected via USB Ethernet?

You can configure your Network System Preferences so that your Ethernet interface has preference over wifi. It will not automatically turn off wifi, but it will use the Ethernet if it's plugged in.

2960x broken when USB console cable connected

Hi
I have a strage issue here, on 2 different 2960X ( WS-C2960X-48TD-L ) when I connect the mini USB cable for console access the switch do not respond anymore, after few seconds all the led stop to flash, the switch start to broadcast all packets on all ports, causing redundand port to create a loop.
The issue is present on both switches, tried to cold boot, tried updating to 15.0(2)EX4 but still same issue.
I tried different usb cables that are working on 2960S and 3750x, anyone with this issue ?
It is annoing as I have only usb pors available there.
The issue start when the cable is plugged in without even start the login, the Control plane free about 20-30 seconds after. If I remove the usb cable everithing is fine again, but spanning tree on other switches has gone crazy due to the switch was farwarding on all ports.

Hi,
anyone has this same issue ?

When USB hub is connected Sat P30 doesnt boot up

Similar Messages

Maybe you are looking for