When using addTarget:action:forControlEvents: how to find out which event?
When you use addTarget:action:forControlEvents: how can the action find out which event got called? the (id)sender is the object of sender, but no parameter for the event?
thanks but the event is always nil for
[uitextfield addTarget:self action:@selector(validate:forEvent:) forControlEvents: UIControlEventAllEvents ];
any ideas?
Similar Messages
-
How to find out which event is triggered in SDK
Hi all
From SDK, I am would like to know which event is triggered when the user select navigation menu Follow up -> Create Lead (screen 1).
I am guessing, it calls LeadCreateWithRef outport event but I don't see any absl code?? (screen 2)
When I try to switch from Display to Edit, I got error "Component which you are trying to edit comes from a lower layer. Please use Extensibility Explore to Edit" (screen 3)
Also in Extensibility Explorer, I can't open the button details (can't even see it in the buttongroup).
Any advice is welcomed.
Thanks
AnthonyHi Meghna
Thanks for the info. I am trying to do reverse engineering, to understand how to existing UI screen is built, how and what events get called when button is pressed and which screen will be opened.
For example, in Ticket screen, when I select Follow up then Create Lead:
I cannot drill down to see the button and its properties??
nb. Also there is no left right scroll bar to see the rest of button group. Is it a bug?? I am using Windows 8.1.
And in outport setting, I don't see which action/event triggered? and what screen to show?
Thanks again,
Anthony -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
How to find out which type of the driver is used in our application?
Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
PhoenioxHi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
for(int i=0;i<drivers.size();i++)
Driver driver = (Driver)drivers.get(i);
String driverName = driver.getClass().getName();
System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath -
How to find out which sequence a certain column used?
you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc. -
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level. -
Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps. -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
How to find out which object on a JPanel was clicked...
I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false).
When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to it (set theJButton Visible on the JPanel that was rightclicked). When the JButton is clicked, it will hide the JPanel it was on and hide itself again.
I added a MouseListener(MousePressed) to the main Jpanel but I dont know how to find out which of the smaller JPanels was clicked. I would Also need to know how (in the ActionEvent for the JButton) the JButton knows which JPanel it is on so it knows which one to delete.
------------------------------------------------------------------CODE
void JPanel1_mousePressed(MouseEvent e) {
if ((e.getModifiers() & e.BUTTON3_MASK)!=0){
------------------------------------------------------------------CODE
void JButton1_actionPerformed(ActionEvent e) {
------------------------------------------------------------------CODE
Can this be done or should I add a MousePressed Listener to each of the 200 small JPanels and create a JButton for each of them??
Any Info Appreciated... Thanks....Here you get a hint, hope have added all mouseListener as well and registered....addMouseLi...etc
// many JPanels here...
JPanel clickedPanel; // a reference only
// In mouse Click..
public void mouseClicked( MouseEvent e ){
clickedPanel = e.getSource( );
clickedPanel.add(new JButton("Look, I am Added") );
} // it is Only HINT, a working HINT -
How to find out which objects are at the end of the datafiles
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/ -
How to find out which IPHONE 4 and 4S will work in Armenia?
how to find out which IPHONE 4 and 4S will work in Armenia?
Hi Chitwanjit,
STAD and ST03 are your friends.
- Get in contact with your SAP Basis in order to get an explanation how
to use this tools (if necessary).
- SAP courses ADM315, BC490 explain these tools
- search in help.sap.com,
SDN, google, there should be plenty of information available as well.
Kind regards,
Hermann -
Ipad 1 ..How you find out which band is on?
How you find out which band is on Ipad 1. like 2.4 or 5 ghz
thanksYou should use Discoverer Administrator for the purpose. If you try to delete an existing join Discoverer will display a confirmation dialog with four buttons. One of the buttons is labelled 'Impact...' Clicking this button will display a list of folders, conditions, summaries, and workbooks that reference this join. A workbook is included in this impact analysis if at least one worksheet in the workbook references the folder(s) included in the join.
Regards
Discoverer Technical Team -
How to find out which server is running on which port
hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanthThe best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation). -
How to find out which job is calling package
Respected sir,
How to find out which job is calling my package. Please help me regarding this.
Regards,
user570124Please read about [url http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_util.htm#i997163]DBMS_UTILITY.FORMAT_CALL_STACK in the manual.
or [url http://asktom.oracle.com/tkyte/who_called_me/index.html]this routine from Tom Kyte may be what you are looking for.
Regards,
Rob. -
How to find out which plugin is missing fro mthe website: http://web.it.nctu.edu.tw/~twli/interactive/scr_tutf.htm?
After looking at one similar question found in mozilla support and answered by jscher2000 (https://support.mozilla.org/en-US/questions/957655), I have found out I have to look for either <object or <embed. What I found is : <embed width="100%" height="100%" messagecallback="parent.frames.MANIPULATIONS.AppendMessage" spinfps="15" spiny="30"
What do I have to do now?This big1.mol (and possibly big2.mol) file is loaded in the embed plugin object that is opened in a iframe, so you can right-click the plugin area to check the embed code.
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big1.mol
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big2.mol
Maybe you are looking for
-
Is it possible for a cluster to be set to allow variable data input?
I posted this question at the bottom of a different thread but it looks like that one has died out plus this is really a separate question. So I hope no one minds me starting a new thread here. I made the program Convert2Matfile.vi which I intend to
-
I am giving away a computer, what is the best way to wipe out data prior to depature
i am giving away a computer, what is the best way to wipe out data prior to depature
-
VLM:problem connecting to server
I created a network installer via my volume license manager. When I run the vlm client I get the message that there is an error, problem connecting to the server. I added the server to my NI license manager. He sees which licenses are available. But
-
I'm trying to demonstrate the use of random access files by making a telephone directory program. The program creates records and writes them to file, but when the user reads the file, I want to display all the names in alphabetical order. Should I d
-
ITunes not seeing my iPhone4...
This is prolly an old one, but here goes... Phone arrived yesterday, attempted so sync on MacBook pro (running Leopard), iTunes not seeing phone. Re-installed iTunes 9.2, everything fine. Today, attempting to do some more syncing, and, once again, iT