When using adobe photoshop cs6 screen turns white and locks up, have to logoff and log back on
Can't find an updated video driver, or cs6 update to fix this.
I think that I'm having the same issue. I've downloaded the updated java that you suggested. this is what I'm getting....I'm not sure what to do. then once I close them all out if I try to open anything that has already been edited as final jpg files its the same thing.
Similar Messages
-
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.
Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices. -
Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?
Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.
-
Anyone knows how to use Adobe Photoshop CS6 on Mac?
Anyone knows how to use Adobe Photoshop CS6 on Mac? I've downloaded from cnet and it seems not working. Asking for a stable Adobe application Manager. Downloaded and not working..
System requirements are v10.6.8 and v10.7 > System requirements | Adobe Creative Suite 6
Not v10.8 -
my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.
Restore the phone --> http://support.apple.com/kb/HT1808
If this does not resolve the problem you have a hardware problem. -
A file which was created and saved using Adobe Photoshop CS6 is not opening anymore HELP
Hi, please help with my issue which is as follows:
A file which was created and saved using Adobe Photoshop CS6 is not opening anymore and sends a message saying that the file is not compatible.
What should I do, I have invested so much in that file and I dont think i will be able to do it all over again.That's why people do incremental saves and use backups... You could try to open the file in an image viewer like IrfanView and see which parts are salvagable, but that's as good as it gets most likely...
Mylenium -
When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.
Thank you very much for answering my question. Have a great day.
-
i can use adobe photoshop cs6,the adobe photoshop show me tril version for 30 days how will be use life time (full version)\
You can buy it here: https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_ creativesuite6.html?start=10
$700 Standard/$1000 Extended Full price
$200 Standard/$400 Extended Upgrade price from CS5.
Gene -
WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Can you cancel Adobe Photoshop CS6 from one computer and put it on another?
Can you cancel Adobe Photoshop CS6 from one computer and put it on another computer?
Yes. You have to deactivate it on one computer and then you can install it and activate it on another. Technically, your license allows you to have Photoshop CS6 installed and activated on two computers, you just can't use both at the same time.
-
Today I was doing my chemistry homework when all of a sudden my mid 2011 MacBook pro running Lion 10.7.4 started going very very VERY slowly to a point where it was unusable. I restarted my computer and went to type in my password. When I did this, the computer recognized the password and began to boot yet the pinwheel came on and the screen turned gray and went back to the account selection screen. It continues to do this everytime I enter my password and I can no longer access my account. How do I fix this.
You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac -
After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....
Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.
-
My son's ipod touch is not charging because the screen turns white and it freezes up. Trying to reset it and figure out the problem but don't kno what to do.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
n the middle of looking through some pictures, my iphone 4 screen turned white and is now not turning off or on. What's the best thing to do?
Try doing a hard reset - by holding the 'Power' button on the top and the 'Home' button simultaneously!
Maybe you are looking for
-
How can I set a default window in MAIL (10.6.8) so that it's 27" wide?
I don't recall this problem pre-OSX. Opening MAIL (in Snow Leopard) results in a window that completely fills my iMac's 27" monitor, almost 100% of the time – even though when exiting MAIL I have all windows to a manageable size. How can I limit MIAL
-
Data node mapped to Adobe Form empty - Web Dynpro ABAP
Hi, I've created a web dynpro component in ABAP. One of the view contains an interactive Adobe form. Form properties : Data source and pdf source are mapped Enabled checked Submit action mapped to a method. This method reads the node mapped to the fo
-
I have a simple form with two canvases, one content and one stacked. When I run the form, the stocked canvas always displays first despite having the property 'display on entry' set to 'no'. I have only encountered this problem having converted the f
-
I am running on a Mac OSX 10.6.4. After updating Firefox to 3.6.10, a few add-on disappeared. Specifically, Delicious, 1Password, Stumble ON and Buckts. I looked for updates and none were available. I've run through the view menu and preferences but
-
UCCX8.5 HA node 1 not master
Hi, We are running UCCX8.5 in our dev lab (NFR kit) in HA (LAN) setup, when I reboot both servers node 1 is master (check by http://node1server/uccx/isDBMaster) but after a while (hour or so) suddenly node 2 is master. When I run CAD, I can login, go