When using airport express with magic jack it disconnects when i use the phone.

When the airport express is used with magic jack it disconnects internet service when i use the phone. That is with incomming or out going calls.

I went through that very same issue with two of my Samsung phones. ....my problem turned out to be corrupted files within my 1st phone programming due to a bad OS update
The second phone issue occurred because my phones data became corrupted by a mild virus  therefore it was necessary in both cases to replace the phones. ..
But,  there is also a third option,  try removing any recent apps you've added then turn your phone off and back on to refresh
Or try doing a factory rese, I know I realize how frustrating these are but,  in some cases it fixes the issue without additional challenges. ..
You should also add the Verizon protection and security app to your phone to prevent virus and other such problems from affecting your phone going forward. ...
The best thing about this app aside from its protection is that it also enables the user to easily save and transfer their phone content between phones and backs everything up to a minimum of 25GB of the cloud
But,  you also need to turn your android phone off at least once every 3-days to maintain a good connection to the Verizon network

Similar Messages

  • Airport express with hard-wired medem router?

    hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
    Can anyone please assure me that this set up would work:
    lounge: iMac with aiport card.
    bedroom upstairs: pc with usb wifi thing
    living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
    would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
    thanks for your patience!
    also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

    With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
    Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

  • Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Yes, that's one of the things airplay is for...

  • Can I use Airport Express with iPhone in my hotel room?

    Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

    I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

  • Using airport express with existing network

    So I have a Zoom wireless modem/router that supports g + b wireless. If I get an airport express, will it connect to the existing wireless network? And if I want to stream music to my stereo, will the airport express communicate with my MacBook at the n network speed, or does it step down to the speed of the Zoom box?
    Not sure if the airport express would talk directly with the mac or use the Zoom as an intermediary.

    Welcome to the discussions!
    You have a couple of options.
    1) Configure the AirPort Express (AX) to "join" your existing wireless network. This will allow you to stream AirTunes to the AX over your current wireless network. If you choose this option, the AX will connect at "b/g" speeds.
    2) Configure the AirPort Express to "create a wireless network" so you can stream AirTunes at "n" speeds from your Mac if it is "n" capable. The downside to this approach is that you will need to switch wireless networks whenever you want to stream AirTunes, and since the AX will not be connected to a modem, you will not have internet access when you are streaming AirTunes.
    Users usually choose the "join" option to allow simultaneous internet connection and AirTunes streaming.
    Connection wise, your Mac must communicate to the wireless router, which in turn communicates to the AirPort Express. Your Mac will not communicate directly to the AX unless you choose option 2.

  • Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

    Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

    I can't seem to find any information anywhere.  It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod.  Not to mention the Apple "Genius" told him that it should work.  However, they also told him that it came with an ethernet, USB and the stereo patch cables...

  • Can I use Airport Express with a USB Hard disk as a NAS solution?

    What have people tried for NAS solutions that work really well wirelessly? Can I use my Airport Express with its USB port to attach a hard disk? Or do I need an Airport Extreme base station? Or some other solution?

    The price of the Time Capsule includes the NAS backup system plus a hardware router for your network.
    Macs do not support USB 3.0 and most likely won't because Apple's weight is behind Thunderbolt which is considerably faster and more versatile than USB.

  • Using Airport Express with Internet Sharing in Leopard

    Howdy all,
    I have Internet Sharing enabled on my MacBook Pro running Leopard 10.5.4. I use a Sprint Sierra Wireless Aircard 597E modem to connect to the Internet.
    I'm trying to get my Airport Express & Time Machine to recognize my MacBook Pro, or the other way around. Basically, I want to be able to access the Airport Express to wirelessly play music through a pair of speakers and be able to access the Time Machine for backups & accessing files.
    With Internet Sharing enabled, my iPhone can access the web, so I believe I have the sharing set up correctly. However, I can't see the Time Machine and my Airport Express just keeps blinking amber.
    Does anyone know what I might need to do to resolve this issue?
    Any help is so very very much appreciated!

    Thanks Kappy,
    I'm not sure you're exactly following me on this one, though. Here's what I've discovered on my own for anyone else facing the same situation I am:
    1. You /cannot/ use Airport Express while using Leopard's Internet Sharing.
    2. If you want to create a local network, in this situation, you'll need to use Time Capsule to establish the initial local network, then join the Airport Express into that network. At that point you can use Time Machine with Time Capsule, access it as a hard drive and use AirTunes with the Airport Express.
    But you cannot use the Sprint AirCard (and I assume any other similar setup) and your Mac with Internet Sharing to build the local network and then join the other devices to it. Unfortunately.

  • Trying to set up Airport Express with Ethernet Powerline adapters

    Hello,
    Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
    I want to set up as follows:
    Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
    The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
    I have airport admin utility configured as follows:
    Airport tab:
    Wireless mode: create a wireless network
    Wireless network name: same as my wireless router SSID
    Allow this network to be extended: unticked
    radio mode: 802.11n (802.11b/g compatible)
    Channel: automatic
    Wireless Security: WPA/WPA2 personal (as per my router)
    Wireless Password: as per my router
    Verify Password: as per my router
    Internet tab:
    Connect using: ethernet
    Connection sharing: off (bridge mode)
    Music tab:
    Enable Air Tunes ticket
    no password set
    In iTunes, I have home sharing on & share entire library selected with no password set.
    Using OS 10.6.5 & Airport Express 7.5.2
    I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
    Any assistance would be appreciated....
    Thanks

    Hi,
    Thanks for the quick response...
    As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
    Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
    So, the problem is the relatively new Belkin F7D4401 router.
    Looks like I will have to find an alternative 802.11n...
    Thanks for your help.
    Regards
    Simon

  • Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

    Hello, I hope somebody can help.
    I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
    I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
    When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
    But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
    I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
    What could the problem be?

    99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
    Ring your ISP and make doubly sure you have exactly the correct username and password.
    If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
    In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

  • Airport Express with printer & hard drive with Time Machine

    I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
    I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
    I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
    I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
    Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
    btw, When doing time machine, does it keep all the metadata with each photo?
    Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

    You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
    The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
    So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
    If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
    Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
    Message was edited by: Bob Timmons

  • How to setup airport express with time machine

    just bought airport express so i can extend my wifi range,can anybody help on how to set up! I have time machine 2gb, my house is wired with cat6 cable in all the bed rooms, but now only half my house get wifi,so i want to extend it.I know i have to go into air utility and change some stuff, but sure what stuff?

    I assume that this is a new AirPort Express and you have not tried to configure it previously.
    Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
    Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
    Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
    Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
    AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the AirPort Express and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
    You should be all set.

  • Airport Express with D-Link router?

    I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
    I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
    Any help will be greatly appreciated.

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
    The few that are known to work are:
    o another Airport Express Base Station
    o 802.11g Airport Extreme Base Station (AEBS)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54

  • Airport Express with Time machine vs. Time Capsule?

    I'm looking at replacing my backup system. I like the idea of Time Capsule with Time Machine, but I'd like to know if Airport Express with an External drive really works as reported with the March '08 firmware update. I can't find a single place where Apple confirms this.
    Also, I look at time capsule and think it's cool, but with $179 (AEBS) + ~$200 (USB 1TB drive) = $379
    and 1TB TC running $499, why would I buy TC? The AEBS system gives me the ability to easily swap the drive if it fails and I could buy a drive with a 3-5 year warranty vs. the 1 year on a Time Capsule?
    Comments?

    I assume that this is a new AirPort Express and you have not tried to configure it previously.
    Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
    Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
    Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
    Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
    AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the AirPort Express and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
    You should be all set.

  • Airport express with Snow and wired Mac Mini?

    Hi,
    I am trying to help my parents set up airport express.
    They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
    Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
    Thanks!

    Nevermind, I guess I answered my own question.

Maybe you are looking for

  • External table in Oracle 10g and Windows server 2003

    I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063. I have the [seemingly] exact same setup in an Orac

  • BADI or EXIT for MIGO

    Hi, I need a BADI or EXIT that is executed AFTER TO POST Goods Receipt from Purchase Order (101 Goods receipt for purchase order into warehouse/stores) for transaction MIGO I try with MB_MIGO_BADI, MB_DOCUMENT_BADI AND EXITS but are executed before t

  • Iphoto unreadable

    When I try to open iphoto I get the following message Your photo library is either in use by another application or has become unreadable" It tells me to shut down and then try to rebuild the library, but this doesn't work. I can't find the iphoto Li

  • System problems? Neither my iPhone nor my wife's is able to make calls. Rebooted, restored, etc. Is Verizon experiencing problems?

    System problems? Neither my iPhone nor my wife's is able to make calls. Rebooted, restored, etc. Is Verizon experiencing problems?

  • Numerous applications crashing after Maverick upgrade

    One Crash report below.  I'm still relatively new to Mac and up to recently a confirmed convert.  However over the last few months things have gotten steadily worse in terms of application quitting and now with the Adobe Elemnets app I cannot access