When using cd my mac gives error

when i want to use a cd or dvd, my mac mini gives an error..
some music cd's work, but with dvd there is allways an error, for exemple by installing something.. Does any one know's what it is??
Vise gives the error 1008:5,-5000

Hi kiento-
Greetings and welcome to the Apple Discussion boards
Some users have reported success using an optical drive lens cleaning kit. I would give that a try first.
If that doesn't doesn't solve the problem it is possible that the optical drive is defective. You can either chose to replace the drive yourself, have it replaced at a service center, or purchase an external firewire CD/DVD drive.
Luck-
-DaddyPaycheck

Similar Messages

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

Colegio Oswald please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 205.

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

HT4864 My outgoing email as stopped working when using Outlook for mac 2011. Any suggestions?

My outgoing email as stopped working when using Outlook for mac 2011. I have deleted and reinstalled the account twice. I have 11 gig free on my iCloud account. The outgoing server is set at smtp.mail.me.com using port 587. If I was able to reinstall the account, I am positive I have the correct password. I can log into my iCloud accout using the same credentials.
Any suggestions?

I called Microsoft to fix my problem...for those maybe having the same issue, I was told by the Tech to use this outgoing server setting - p06-smtp.mail.me.com
All is working fine since doing so.

TS4006 when using iCloud between mac and pad, what does this mean - "your iPad will no longer back up to your computer automatically when you sync with iTunes"

when using iCloud between mac and pad, what does this mean - "your iPad will no longer back up to your computer automatically when you sync with iTunes"
DONT WORRY EVERYONE, FOUND THE ANSWER I NEEDED FROM ANOTHER POSTING - THANK YOU

Welcome to the Apple Community.
You don't need to do anything, you have chosen to back up to iCloud instead of iTunes.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

What shows on screen at startup when using find my mac if owner locks it?

what shows on screen at startup when using find my mac if owner locks it?

A gray screen where they will have to enter a six digit passcode to unlock the Mac. If the Mac were being used and the remote lock sent, the computer would re-boot to this screen.

When trying to save interface ,gives error

Hi ,
When i am trying to save it gives error below.
Interface has following errors.Interafce can't be generated or executed.
Do you want o save anyway.
Critical Staging Area The staging area of this interface is defined on the target but has a logical schema different from the target datastore.
Redards,
srini

Hi,
you are using different schema for your target tables. i mean you are creating target datastore different from where your sources located.
suppose that you have staging and target schema. you have to create your tables in staging if sources are located at staging area.
if you want to use target schema, you have to configure one more logical schema at topology tab.
and select new logical schema when you are establishing your new interface at overview tab.
i hope this helps.
www.odilibrary.com
Ugur MIHCI

When using iMessage on Mac, messages don't sync to phone or iPad.

The issue I'm having is described in the title of this discussion. When using the iMessage service on my MacBook Air, the messages I'm sending and receiving won't sync up with my iPhone or iPad.
I've tried nearly every option and I've just about had enough with this ****** service that constantly goes down.

It's going to be hard to make suggestions given none of us know what this "nearly everything" you've tried is. You may well see suggestions for things you've already done.
Generally, the problem you're having is resolved by signing out of iMessage on all of your devices. Then, sign back in from your phone. Wait for iMessage to be reactivated. Then, sign into the other devices using the same Apple ID.
For what it's worth, I've had the service go down once since it was implemented. I know of another outage last week but it only affected some people.
Best of luck.

Can I keep a published/shared calendar current when using two synced macs?

I have two macs, home and office, thinking about a laptop for travel as well, plus iPhone. I sync all the calendars with .mac which works nicely, then publish and share. But I am not publishing the .mac version, I am publishing the version on one of my machines, correct? If I change my calendar on another machine how do I get that change to propagate to the published version? Does the machine doing the publishing have to be on all the time? Do I continually republish from the new machine where I just made the change? What about people who subscribe to it, if it has the same name when I republish will their subscription stay current?
Annoying that I cannot access and share the version of the calendar stored on apple servers and used to sync my machines.
Need to resolve a few issues before bailing on Yahoo, but must hurry, the Borg Collective is going to assimilate them soon, and resistance is futile.
Thanks for any advice.

Posting 2006 and 2008 threads that are very outdated is not a good idea
There is no way to "sync" iPhoto libraries
There is software that Old Toad has tested that will sync the photos which may or may not help you
You can easily manually move photos between libraries using iPhoto Library Manager with is probably the best solution
LN

Powerpc error when installing on intel mac, powerpc error when installing on intel mac

Trying to reinstall some software that used to work & no I receive the following error: “Spyder3Pro_Installer” because PowerPC applications are no longer supported. This happened on another application I was attempting to install as well.

Thank you for the reply, but I was able to fix it. I'm sorry, I guess I didn't explain it well. The apps were not for a powerpc & the mac is an intel. For some reason the apps thought it was a ppc, so I'm not sure what happened. I had Mountain Lion installed & the apps were working fine until the crash. Just trying to put everything back & I get this error. There is another app that I get the same error on, but not sure if the fix will be that easy.

USB headset's microphone starts to sizzle when used with my Mac Pro.

Hello,
First I would like to say I'm sorry for my english, I'll do my best but I'm not sure at all of what I'm writing.
Here is my problem: last year I bought a new Mac Pro 2.93 GHz Quad-Core, everything worked just fine except my headsets. I had a one year old Plantronics ".Audio 750 DSP Stereo Headset" that worked perfectly on my previous PowerMac G4 MDD.
When I used it to speak the microphone starts to sizzle after a random period of time (I just have to disconnect and replug the headset to make it works again for some time). I tried with every applications possible (Skype, Ventrilo, Teamspeak, WireTap to record myself and some others) and the problem always appeared.
I first though it was a coincidence and maybe my headset had a problem so I contacted Plantronics, explained the problem and they offered me to replace the headset with a new one but I had the exact same problem.
I tried with another headset (same model as mine) my brother had and this time it worked fine so I kept it for one year but some days ago it started to have some problem (not related to the mac) so I decided to get a new one, a Plantronics one again but a new model (Plantronics GameCom 777 Surround Sound Gaming Headset) and my problem is here again.
I searched on google, on many mac related forums and I didn't see this problem anywhere so I try here before sending back my headset and try another manufacturer.
The problem definitely comes from my mac but I don't know if that's a problem with all the "Mac Pro 2.93 Quad-Core" or just mine (as I said, except this problem everything works perfectely).
If you have any solutions I would be happy to hear them !
Thank you.
Message was edited by: lgda

May have been good that you waited The better subject line might be, "What is the best recommendation for a Microphone Headset" or "Why does my Microphone Headset have noise".
After looking around a bit, and looking back over our posts, I've reached some conclusions that I would draw if I were you. I don't know if this addresses the totality of it, but this is what I think at this time.
The product: http://www.plantronics.com/northamerica/enUS/products/computer/console-gaming-headsets/gamecom-777
Now I know at least one application for this, and I can imagine a bunch more.
It's pretty expensive compared to one alternative I found that was the only device sold like it in this entire store, which I find odd: http://eshop.macsales.com/item/Altec%20Lansing/AHS602/
It looks to be of high quality and quite Apple ready;
The headset's surround sound hardware is built right into the included USB adapter, which plugs into any USB port on your PC or Mac with no additional software necessary. Simply plug the headset in to the USB adapter, and you're ready to go
So why won't it produce good sound?...
That the headset is just faulty perhaps. That the adaptor is faulty. But that's as far as I can think as far as the headset goes. There should be no other adapter that helps if the one they supply you does not. If it was an adapter problem it would only be their adapter problem, you don't need anything between that and your Mac. That device as it's set up is good to go. So the older adapter worked fine for 5 hours? That would point me to the current one they sent you as the problem. You'd have to ask them why one works well and the other does not (and if their phone or email support is a bad as their site support it, I feel sorry for you).
http://www.plantronics.com/northamerica/enUS/support/?WT.svl=leftnav
http://www.plantronics.com/europeunion/fr/?requestid=1207885
But say all is well there (you'd have to try another one they send you to see).
If what you have is fine, what else could it be.
This is all I can come up with:
1) Your USB ports on the Mac. Have you tried different ports?
2) Perhaps a long cable or something else concerning the headset (hmm, maybe not, something else in the Mac?), something that is still being affected by electrical interference. The different adapters you have... are they that much physically different?
3) An inherent problem on the 09 Mac Pros. They have one glaring problem Apple hasn't fixed yet regarding audio, that playing any raises the Macs temps to really high levels and degrades performance in apps when audio is playing in the background. For instance, playing a song in itunes. For many of us 09'ers our machines start to run really hot, really quickly.
Whether that has any impact on your issue I don't have a clue, and you'll get no help from Apple there..
So that, Igda, is all I can come up with. Those are the things I'd be mulling over right now.
I'd contact the company and tell them about your situation and particularly about the adapters. I'd ask if they have heard of any of their products having a problem on 09 Mac Pros.

Consuming Websphere Portlets in spaces using WSRP WSDL url gives error.

Sr#3-6516739281
Ver- 11.1.1.6.0 spaces.
Hi ,
Customer consuming a websphere portlets in spaces
Producer: Websphere portal server
Consumer - Webcenter spaces 11.1.1.6.0
WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
The thrown exception is:
<3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
     at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
     at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
     at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at org.apache.myfaces.trinidad.rend
This works fine in .net and other consumers.
Please see the screen shots attached to SR-
WCP_PortletProducerRegistration.png - registration screen in spaces
WCP_Error.png - Error when try to see the portlet in spaces page.
WC_Spaces.out -logs with the above error.
We also tried to register this is Jdevelooper. This gives different error in registration it self.
screen shot- JDeveloper-WSRPProducerRegistration.docx
Please shed some light on this to proceed further.

Sr#3-6516739281
Ver- 11.1.1.6.0 spaces.
Hi ,
Customer consuming a websphere portlets in spaces
Producer: Websphere portal server
Consumer - Webcenter spaces 11.1.1.6.0
WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
The thrown exception is:
<3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
     at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
     at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
     at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at org.apache.myfaces.trinidad.rend
This works fine in .net and other consumers.
Please see the screen shots attached to SR-
WCP_PortletProducerRegistration.png - registration screen in spaces
WCP_Error.png - Error when try to see the portlet in spaces page.
WC_Spaces.out -logs with the above error.
We also tried to register this is Jdevelooper. This gives different error in registration it self.
screen shot- JDeveloper-WSRPProducerRegistration.docx
Please shed some light on this to proceed further.

Attempting to use "backup and Restore" giver error message

In November 2014 I backed up my PC ( see below ) onto a 2TB ecternal drive ( Lacie). This ok and can restore. Spare space 1.2TB
Now when I attempt to Backup again, using Windows Backup and restore, with same settings I get an error message :
"The requested operation cannot be performed on a file with a user-mapped section open" This appears after some time of activity. There is no mention of WHICH file causes the problem. I have repeated with different settings ie with
part backups only, or just one drive only.
The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
I would very much appreciate some advice.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere. Eventually I succeeded after disabling start menus and uninstalling some programs. I also disabled my Kaspersky anti-virus completely and disconnected
the internet!! This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!! Thank you. Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

Ldifwrite created file used in ldapadd/ldapmodify gives errors

We want to backup entries in the Users container.
1. The ldif file created by ldifwrite:
ldifwrite -c oidtwo -b "cn=Users,dc=dn,dc=dev,dc=pg,dc=gov" -f backup.ldif
2. ldapadd -p 389 -h localhost -D "cn=orcladmin" -w oiddp -f backup.ldif
3. Got errors in orcloci ...in VI we found that the orcloci entries are not formatted properly, and we fixed this manually.
4. We got another error:
adding new entry cn=orcladmin, cn=Users, dc=dn,dc=dev,dc=pg,dc=gov
ldap_add: DSA is unwilling to perform
ldap_add: additional info: You cannot add entries containing authpasswords.
Just wonder if this is the right way to back up this container?
Thanks!

You'll need to remove authpassword attributes as those are created at create time. Its mentioned in one of the steps of moving to a new server (Metalink Note:276688.1). The XSL they used is below:

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xml:output method="xml"/>
<xsl:template match="*|@*|node()">
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="attr">
<xsl:choose>
<xsl:when test="@name='authpassword;oid'">
</xsl:when>
<xsl:when test="@name='authpassword;orclcommonpwd'">
</xsl:when>
<xsl:otherwise>
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
You'll want to start with dumping it to XML:
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -X -D "cn=orcladmin" -w $IAS_PASSWORD -b "cn=users,dc=dev_domain,dc=com" -s sub "objectclass=inetorgperson" > portal_users.xml
Then run that against the XSL to remove the attribute:
xml -f -s del_authpassword.xsl -o portal_users.xml portal_users_new.xml

When using cd my mac gives error

Similar Messages

Maybe you are looking for