When using "coverflow" viewing, sometimes I see the image, sometimes a black placeholder. Why?

I depend a lot on using the coverflow to scan through a bunch of images, every once and awhile, I can't see the image and there is just a black placeholder, usually it seems to be jpgs. What's causing it to be "unseen?" It drives me nuts. : )
Kate

You'll have to ask Apple about that, CoverFlow is their feature, powered by their (frequently broken) thumbnail/preview code.

Similar Messages

Why is it when using my iPhone 4s front camera, the screen sometimes turn black or have blue stripes on it? What's wrong with it and what should I do?

When using my iPhone 4s front camera, the screen sometimes become black or have blue stripes on it! Is this a hardware or software problem? Can this issue be covered by my warranty? I bought it inmid-december last year, and this problem came at around Late January. It's a rare case, only came about 5 times, but this really concerns me. What's wrong with it? Thank you so much for your concern.

thank you for your reply
I brought it to the store and they agreed to give me an exchange. thank goodness!
I have a new question: I've now transferred my back up datas to my new iphone. They wanted me to register, so I registered (as my old apple ID) and then they asked if I want to restore backup, I did that too. after the restore back up process, the only things that aren't there were my music and apps! what should I do to get them into my new iPhone?

When using Firefox certain videos play but the image is green and distorted.. help?

Firefox 3.6.8 and 3.5 (I downgraded to see if that would solve the issue)
Windows 7
Intel Core i5
Flash Player: WIN 10,1,53,64
When using Firefox certain videos play but the image is green and distorted. The image turns into lines and sometimes it half of the screen of the video. Examples are streaming MLB.tv video and some vimeo videos. The odd thing is that it isn’t all Vimeo videos. Is this a flash issue?
The issue does not happen with Internet Explorer which leads me to believe this is an issue with Firefox. I downgraded to 3.5 and the issue still persists.
Screen Caps: http://yfrog.com/1x46496103j and http://yfrog.com/n112309689j
Any help?
== URL of affected sites ==
http://

Try disabling hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash settings] (using Firefox, right-click on any Flash object on a webpage, select Settings, uncheck "Enable hardware acceleration on the Display tab).
Ref:
http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos

I have gif animated images that are not showing up in my web page when I am view in Firefox. The images are fine in IE. I would like to tell all of our clients to use FireFox but with this issue I can't recommend firefox. Please let me know what I can do.

I am using a word document, converting to html and I am not seeing my animated image.No problem in IE 9 and I wouldn't think it would be a problem in Firefox.

Am working on a webpage with some animated gifs in it. Everything works fine when it is loaded up, the images display and animate continuously. But these gifs may be updated on the server. I have some javascript that checks if the gifs have been updated by checking the modified meta data. If it has that image is reloaded. this works fine and the new image is brought up but that animation is never started. it just sits there on the first frame.
works as planned in chrome. it also worked as planned in FF9 but does not in FF12

When using faces, how do I see the whole photo?

Frequently when reviewing unnamed faces, I would like to see the whole photo to see the context in which the face appears. Is there a way to do it?

Are you in Faces View? There should be buttons on the bottom edge of the Browser to switch from the Face to the whole photo.
See this page in the User Manual:
As the number of confirmed images of a person grows, it can be difficult to identify a person’s face in a small thumbnail image. To make it easier to identify a person’s face in an image, you can either make the thumbnail images larger or switch from showing whole images to showing only faces.
To make the thumbnail images larger
In the Faces browser, drag the Thumbnail Resize slider to the right.
To show faces only
In the Faces browser, click the Faces button.
Each thumbnail image in the Faces browser is cropped to show only the person’s face.
To show whole images
In the Faces browser, click the Photos button.
The thumbnail images in the Faces browser return to displaying whole images.

Bug in JDev 9.0.3.3 when using derived views

Hi,
I observed in JDev 9.0.3.3 the following behavior when
using derived views:
-I'm creating the view V1 based on the entity E1, add to it a couple of fields from E1 without generating Java files and close the wizard
-now I'm trying to create another view V1Ext that extends V1; when I try to add to V1Ext new fields from E1, the corresponding wizard button is disabled!!
Regards,
Dan

If you whant to add additional attributes from E1 you must now the "magic clue" to tell Jdeveloper to make E1 editable. As far as I know this is not a bug, but a "feature" of JDeveloper:
Do the following:
In the ViewObject Wizard go to the Entities page and mark the Entity E1 on the left and also mark Entity E1 on the right. Now you will realize that the Button ">" will be enabled. If you click on it you will be asked if you "want to update Entity E1 with E1..." (don't know the actual message, sorry). Press "OK" and you will be able to edit attributes of E1.
It's magic, isn't it?

TS3999 can't see times of my icloud calendar events when using month view...

I use a macbook pro and like to view my icloud calendar using month view so I can see the whole month at a glance.
It used to be that when I viewed my calendar using Google Chrome, the time of each event would show next to the event name. Recently, this changed and now the month view just shows the events, not the times. This is also true for my macbook ical - month view only shows events, no times.
Is there an option to allow the times to show when using month view? I looked in preferences and didn't see one.
Also, as a side note, I tested in Firefox and the times DO show when using month view. I just prefer using my ical or chrome, so would love to figure out a way to fix there.
thanks for any help!

I was able to see some posts after I made mine and I found the answer to the macbook ical issue.
https://discussions.apple.com/message/15378887#15378887
would still love any input on the google chrome issue. If anyone knows how to show event times in chrome, I'd love to hear how!
thanks.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible.

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB. Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM
Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB.
Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use all 512MB vRAM?@

Photoshop can only see what your video card driver reports.
You might want to update your video card driver from the GPU maker's website.

When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

Captivate 5.5 is setting a Mastery Score in the Manifest when using Slide Views

We have encountered a problem with Captivate 5.5 where it is setting the Mastery Score in the manifest to match the Quiz score setting even though we are only using slide views to track completion. This is a problem because if we set the score to zero, our Saba LMS will immediately grant the user credit for the course on the first slide. If we set the score higher than zero, the user will never get credit for the course as Captivate doesn't send a score to the LMS when using slide views to track completion. Our LMS seems to ignore the status passed by the course once the Mastery Score is set. We have compared the manifest behavior in 5.0 and it does NOT set the Mastery Score. We can edit the manifest prior to loading in the LMS but this is a hassle and we'd like to figure out a way to permanently change the behavior to no longer set Mastery Score when using Slide Views to track completion.

Hi,
I believe the easiest way to do this is to edit the manifest.xml file in the Captivate Templates folder. I posted instructions on doing that here: http://forums.adobe.com/thread/956390?tstart=0
Hope this solves your issue. V

I use to be able to see the alias, when I logged in on the web, but it no longer posible

I use to be able to see the alias, when I logged in on the web, but it no longer posible.
any help?
thanks
/mike

You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

When using "coverflow" viewing, sometimes I see the image, sometimes a black placeholder. Why?

Similar Messages

Maybe you are looking for