When using designer the form will not show up.
When I activate the form designer to make it interactive, it will not show the form except momentatily. Is ther a way to turn it up?
David,
I responded to the forum but could not figure how to send attachments to you there. This is another try .
I scanned a form to PDF that I want to, make interactive and fillable. In Adobe Acrobat 7 I clicked on Advanced > Forms> Make form Fillable in Adobe Design. The results is a conversion to an unreadable Form. Checking the PDF preview tab does not help. Attached are the Form and the enteractive form.
Is there any suggestions as to what I am doing wrong?
Ed Walsh
Similar Messages
-
When I mirror a presentation on my iPad air 2 to a TV the content will not show in presentation mode. It will show in edit mode.
Same problem here - 80 gb classic and same thing happened to me this week - plays fine alone - when hooked to computer says it needs to be reformatted and then when i try to reformat i get error 1415 can't reformat - this is bs and im not shelling out for another ipod - why would it work fine but when connecting it to windows suddenly not work> I think Itunes 10 has got some issues
-
Since i updated lion the pointer will not show contents when i hover the pointer over the item....
Since i updated lion on mac pro the pointer will not show contents whil hovering the pointer over the item.... ???
If you use extensions like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flashblock</i> that can block content then make sure that such extensions aren't blocking content.<br />
You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?
If your on 10.6.8 like you should be for security/stability updates, somewhere along the line a later Bootcamp version was issued and only supports Win 7.
You can read my post here for a alternative solution, running a virtual machine software
https://discussions.apple.com/thread/3772839?tstart=0 -
On an iPod Nano 2G, the iPod will not show in iTunes
Using an iPod Nano 2 G, when I plug it into a Mac, the iPod will not show in iTunes. The iPod will charge, but will not sync. This happens across multiple Mac's, so the issue seems to be the Nano, not the computer(s). The iPod will actually show for about 2 seconds in the left sidebar, then it disappears. Any suggestions about how to either fix this, or maybe how to restore the iPod's software. The iPod otherwise seems to be working correctly, i.e. will play music, etc. we have tried switching ports, cables and computers, same results.
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Do other USB devices work on the computer/USB port?? -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
My apple tv, when connected to the television, will only show an itunes icon with a usb cord
My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?
Don Sullivan wrote
"Same thing just happened to me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
Same thing just happened to me too...
I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol... -
TS2634 When I open iTunes using PC, the device does not show up anywhere
The device does not show up anywhere. This is happening for iPhone and iPad. Thoughts?
Hi Friednhook,
If you are having an issue with your devices not being recognized in iTunes on your Windows PC, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons
its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work
-
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
On Yahoo Groups, using Internet Explorer, one can use a clipboard function to post photos to messages. When using Firefox, the clipboard doesn't appear and you cannot post photos on group messages.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton
I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.
-
I am not able to get the form to come up to register when on arizona gold swimming website!
...we need this form to work nowI was just able to view, fill and submit a form for the golf event. Can you tell me more about the machine and browser you've been testing on? Are there others that are unable to fill the form? Can you describe in more detail the nature of the failure? Can you include a screen shot of what you are or are not seeing? From my end everything seemed to work just fine. The only thing I didn't attempt to do was test your payment scheme.
Andrew -
Some of the subfolders will not show bookmarks when I click on the folder containing the subfolder.
I have three computers. 27" iMac, 11" MacBook Air, 13" MacBook Pro. All my bookmarks are synced with Xmarks. On the iMAc and the MacBook Air, the bookmarks work as they should. The bookmark list drops down when I click on Bookmarks and all the subfolders within the main folders contain the bookmarks I have saved in them. On the MacBook Pro this is not the case for one of my folders. It contains about 10 or 12 subfolders and only 5 or 6 of the subfolders show bookmarks when highlighted.
I have tried uninstalling and reinstalling Firefox and then syncing bookmarks again but the problem still persists. I have checked file permissions and they are set as they should be.
I am now at a loss for what to do.Sorry, that sounds like a question for Xmarks support. You aren't using both Xmarks '''and''' Firefox Sync, are you? We have had a number of support posting about problems similar to what you are seeing when using both.
-
I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.
Maybe you are looking for
-
I have an iMac that has been updated to Mac OS X 10.6.8. When I purchased the computer, it came with Mac OS X 10.5.6. Will I be able to use Boot Camp 3.0.4 to install Windows without a physical disk of Mac OS X 10.6 or later? Could I get around th
-
Comments show up in iWeb, but don't appear on published MobileMe site??
This seems to be a pretty recent problem, perhaps with the latest update? So I have enabled comments on my blogs, and in iWeb, the "comment" option shows up. Comments worked previously, because I had several people who had left me comments... NOW, wh
-
Prob in Submit Report via Selection screen.
Hi, I have to submit a report via selection screen. The report name is detemined at run time. This i am able to handle easily as we can use SUBMIT (V_PROG)... WHERE V_PROG contains the name of the report that i get at r
-
Extracting date and hour component from time stamp in diadem ?
Hi all, I am just getting started with DIADEM. I have a column with time stamp format as 4/12/2014 12:03:00 AM, i need to extract date and hour compenents only and store in another column. Can anyone please give me some lead on this? Please ask for
-
Save screen as .gif in Java 1.1
Hi, I have a frame that the user draws on, and I need to save the contents of this frame as a .gif file. I'm running Java 1.1. Can anyone help? Thanks. import java.awt.*; import java.awt.event.*; class PaintArea extends Frame static int x, y;