When using downloadhelper add-on to capture videos I nearly always lose audio

using the add-on downloadhelper, I lose audio in vids when I replay in VLC flash player
== This happened ==
A few times a week
== from time I added the function

I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
I might try a restore and see if it helps...

Similar Messages

  • Add-on to capture videos from internet that don't have a download link.

    Is there an add-on to capture videos from internet that don't have a download link. I am on a Mac.

    In general, you don't need drivers for camcorders on Macs, and the .exe file you downloaded is a Windows program, which won't run on a Mac unless you also have Windows installed.
    It would help a lot if you tell us the exact model camcorder you are using, and what application you want to use it with.
    Regarding iTunes, the latest version is iTunes 11.  You need to have OS X 10.6.8 or later to install iTunes 11.  Your profile says you have OS X 10.4.11, which is a much older version of OS X, so you won't be able to install iTunes 11.  (Here are the iTunes 11 specs.)

  • Why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink?

    Question
    why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink? This feature has always worked perfectly on all my windows XP computers,but not at all on any of my versions of firefox on windows 7.How can i fix this? Why does it not work?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. You can also attach a screenshot on this page below '''Post a Reply''' > '''Add images: Browse ...'''

  • I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

    I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

    Hi,
    The Buddy's Audio can get dropped completely if the speed of your Internet connections are vastly different.
    For example the minimum speed for a 1-1 video chat is only 128kbps Upload (As Downloads tend to be faster).
    Where I live in the United Kingdom I can only get DLS.  This is further subject to the distance to the Exchange.
    DLS at less than 3.5 km can be done at 20Mb at most exchanges.
    At some exchanges there is roll out of some Fibre optic services.
    In most larger towns and cities there is normally the option of a Cable service that offers similar figures.
    In some parts of Sweden you can get 100Mbps services.
    When the speed from your ISP varies a large amount then iChat will drop Frames to smooth out the Video
    There comes a point when so many frames are dropped that the Audio will not make sense and will be dropped.
    At about 128kbps a 5% variance will take you below the 100kbps mark (after allowing for the actual connection overheads)
    At 10Mbps that 5% variance can be (in round terms) 500kbps
    (A 500kbps service is itself good enough for a 4 way Video chat)
    My experience is that PC users on AIM tend to only send the Pic at 10 frames a second (Fps). Any slower than this and the picture losses it's smoothness and flow.
    You may see different Speeds and Frame Rates when you Call Out  compared to when others Call In.
    Setting the Bandwidth Limit to a lower figure such as 500kbps (fast enough for 4 way chats) may get around any variances in the speeds you see in the Connection Doctor during a live chat.
    7:43 PM      Friday; June 22, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • If I am using my Apple TV without hdmi cords do I always lose hdcp playback? If not, which adapters or cords must I purchase so my Apple TV still works optimally?

    If I am using my Apple TV without hdmi cords do I always lose hdcp playback? If not, which adapters or cords must I purchase so my Apple TV still works opitmallly?

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • Captivate 5 freezing issue when trying to add closed captions to video

    Hi There --
    I'm trying to add closed captions to a video (.f4v) I inserted as "Slide Video" on a slide in an Adobe Captivate 5 presentation.  I click on the video to select it, go to the properties panel, select "edit video timing" and then click on the closed captions panel to try and add captions and then Captivate completely freezes and locks up so not only can I not add captions to the video, but I have to use Windows task manager to shut it down.
    I've seen this process demonstrated in a Lynda.com tutorial, and the instructor didn't seem to have this issue with Captivate 5.
    Any thoughts?  Have other users found a work around at all?  I mean, I know I could strip the audio from the video, and then attach it to the slide and do closed captions that way, but it would be way easier (and make a lot more sense) to add it directly to the video, especially since that's what you are supposed to be able to do.
    I'm using Captivate 5 on Windows 7.  I also have Captivate 5 on a personal Macintosh and haven't tried yet to see if the issue occurs on that platform as well.  Has anyone else run into this issue?  Sorry for the length -- this is my first forum posting, so I'm trying to provide as much info as possible.

    Hi Dan,
    Welcome to Adobe Captivate Forums.
    You can try to add the closed captions to Video after deleting the preferences.
    Follow these steps to delete the preferences
    1.  Close Captivate if its launched already
    2. Navigate to C:\Users\<userName>\AppData\Local\Adobe
    3. Locate a folder named "Captivate 5"
    4. Delete the folder
    5. Now Launch Captivate and try your workflow
    Let us know if this solved the issue .
    -Ashwin Bharghav B
    Adobe Captivate Team

  • When using Flash plugin in Fullscreen the video starts pausing occasionally for a second. OK when not in Fullscreen and works fine in Fullscreen with other Browsers.

    I have recently upgraded to 10.0 and whenn using Flash Player in Fullscreen it behaves badly. Starts pausing frequently for aroun a second. It's annoying. When I escape fullscreen and run it within the Browser panel it's fine.. Other Browsers work fine in Full Screen Mode. Tried it with IE and Google Chrome. Firefox is my default Browser so my preferred option.

    goneja2 wrote:
    I have narrowed it down to my Motherboard, GPU, CPU or Power Supply that is emitting the noise.
    I have never heard of such a thing, but the first thing I would try is to disabled Hardware Acceleration (Flash Player Settings).

  • How can I make the project into 16:9 when using 2 4:3 aspect ratio videos in project

    I want to make a project that is 16:9 but am adding a video of a talking head (speaker) fimed in 4:3 and I want to place that in upper left corner of project and then add a video of the powerpoint they were speaking to also filmed in 4:3

    There are a number of challenges to doing this, including the fact that doing so will require lots of rendering and the even bigger fact that, if you're planning to show this on a TV, up to 10% of the edge gets cut off, which means that any text you've got outside of the "safe zone" might be off the screen.
    But, with those caveats, place the upper left corner video on Video 1, select it and open Applied Effects. Open Motion and set the Position and Scale so that your video sits in the upper right corner.
    Add your images to Video 2 and do the same thing, setting Position and Scale so that it is in the lower left of your screen. Then add you main video to Video 3 and set its Position and Scale so that it is in the right 2/3 of your video frame.
    As I say, there are a number of potential problems with this kind of composite, so I'd recommend you do a very short test composition first, then output it and show it on the device or web site you hope to display it. That way you'll get the bugs out before you go investing a week's work into something that has you scrambling to fix at the last minute.

  • Cannot capture video frm PD170 - now says Audio Capture Only Selected??

    So I now can't capture video?? It says before you attempt to do so that it's Audio Capture Only Selecteed / Video Preview Disabled.
    And I have been thru everything to figure how to unselect this option - and cant find anything??
    Can anyone help?
    Many thanks!!

    Thanks for your replies.
    I have the Device Control and Capture presets set to PAL. Is there any other PAL settings I need to set at this stage?
    The 25fps vs. 24fps was confusing me as well. I was told that was the camera that was used, and set to 24fps, and when I step through the tape frame by frame, it appears that it is 24fps. Does that make any sense? Perhaps this is another thing to complicate the whole situation. I've tried multiple variants of capture presets. PAL, NTSC, 24fps, 29, 25, all giving me the same "Preview disabled."
    Any ideas?
    Thank you!
    Katie

  • Captured video not in sync with audio

     
    I capture video and audio from a Sony Beta SX A-75 using the SDI output through Blackmajc card into dual 2.5. We are using DV compression. The audio is out of sync after capture. It is 3 frames off. If I slide the video 3 frames to the right on the timeline , then it looks ok.
    Capture/Input Blackmagic NTSC-DV
    Device Control Blackmajic NTSC 29.97 Hz
    Anyone know what's going on?
    2.5 dual   Mac OS X (10.3.9)  

    Either the sample rate of the audio is off, or, as I suspect, some decks/cameras have to be given an off-set in FCP. Don't remember off hand where that setting is. You may want to check with Blackmagic (Decklink) support about it.

  • Can capture video...but no audio

    sorry if this is a repeat question...new to iMac and Final Cut Express 4. I am trying to capture a video that was recorded with audio. Connected DV camcorder to iMac via firewire - no problem. capture video - no problem. audio? no audio. have looked through the manual - can't seem to find the answer anywhere. is a mid year (07) iMac - aluminum.

    the problem has been solved...although i am not sure how. we were expecting to hear the audio AS it was capturing...and the other day when we tried it, we didn't have audio when we played back what we had captured. tonight, unfortunately, we didn't ever actually try playing back...until now so, i'm not sure at what point in our troubleshooting we actually corrected the problem - but it's corrected....thanks for your help!

  • ITunes freezes when trying to add songs to 30GB video iPod

    Here's my situation exactly:
    I just bought a 30GB Video iPod with some songs and videos already uploaded onto it. After much reading, I found out how to get the songs from the iPod onto my computer so I could put them into my iTunes library. I added some songs and videos of my own to my iTunes library and tried to update my iPod. The iTunes program says do not disconnect-- updating iPod but my iPod doesn't say anything. The funny thing is that the actual iPod says do not disconnect until I open iTunes and try updating it, then the do not disconnect msg goes away on the iPod. I left my computer on for about 12+ hours straight while iTunes said Do not disconnect.. woke up the next morning and iTunes was frozen-- no new songs on the iPod. What could the issue be exactly? I have slight issues with my usb ports-- for example; sometimes they do not recognize things plugged into them (memory sticks, printers)... BUT it does recognize my iPod-- it shows up in my computer as a removeable disk drive or something, plus as soon as I plug it in the iPod says do not disconnect. I definitely need help though... I'm dying to put some songs of my own on this thing.
    Things I have tried so far:
    Deleting and installing iTunes and everything else again
    Restarting computer and iPod-- of course
    Tried plugging it into diff. usb ports
    HP Pavilion   Windows XP  

    I'm assuming the usb hardware problem may be a good possibility because I've always had problems with my usb ports. I can't get a printer to work or those Scandisk things. My assumption is perhaps u can take files from things plugged into the usb ports but you can't add files/etc to things plugged into the usb ports. I will still attempt what you told me to do. I just don't want to lose what I currently have on my iPod and be stuck with a blank iPod because I use it quite often. Maybe a new computer should be my next purchase? Thanks so much!
    HP Pavilion   Windows XP  

  • Iphone 5 small purple spot when using back camera, not showing in video mode

    Hi all,
    Had taken some pictures this week in the street and wasn't noticing anything major. Tonight I needed to take some pictures here at home and I noticed on one picture a smallish weird spot. Went back to the place I took it to make sure it wasn't there (on the floor) but it wasn't.
    I then proceeded with using the camera and I can see the spot stays there wherever I move with it. When I zoom, the spot zooms away with it making it possible for a clear picture. When I put the video mode on, there's no spot whatsoever. When I use the front camera, there is no spot as well.
    As it doesn't show up in video mode, I'm assuming it has nothing to do with the lens but maybe more software/hardware or iOS related, or am I wrong?
    Is there anything to be done about this? From what I found online people said to turn off the phone and back on, tried it to no avail.
    Can always take it back to the shop but I'm assuming this will make it be sent back to apple repair centers etc. so it might take a while to get it back for a relatively simple issue, nothing that can be done any other way?

    I have the same issue - perhaps not exact but extremely similar.  In photo mode, there is a small purplish speck, which I initially thought as dust or something, and of course it ends of in photos taken.  However, this speck is not present in video mode, meaning there is no dust, but some sort of artifact on the photo processor or something.  Either way, itsa product defect - I plan on seeing if Apple will support this and replace thephone.....

  • How do I avoid duplicates when using "Automatically Add to iTunes"

    I recently consolidated all my music and then created a new library in iTunes. Now I'm using the "Automatically Add to iTunes" folder when I find more music from my archives.
    However, unlike when importing from a CD, iTunes doesn't seem to compare to existing library and detect duplicates in songs in this folder; it just adds them to iTunes. So I am ending up with dups. Is there any way to avoid this?
    Specs: Mac Mini running OSX 10.8.5; iTunes v. 12.0.1.26

    See this Apple support document.
    http://support.apple.com/kb/ht1751
    B-rock

  • Can i use Premiere with camcorder to capture video? Canon Vixia HFR300

    I have a Canon Vixia HFR300, I want to record meetings using Premiere on my Macbook, but when I go to capture in Premiere it can not find the camera that is plugged into Macbook's thunderbolt.  Help please.

    John T Smith Oct 3, 2014 9:35 AM (in response to Nicolas Hernandez)
    Premiere Pro capture only works with a Firewire camera
    -How would I know if my camera is a firewire camera? I have AV/Out, HDMI/Out, and mini USB???

Maybe you are looking for