When using IOS6 do not disturb, can you still use the alarm clock apps?

Use this:
http://support.apple.com/kb/HT5463
Then set your alarm.

Similar Messages

Can you still use Home Sharing?

     Can you still use Home Sharing?    I have a Mac Mini (10.6.3) a Ipad (3rd Gen.) and a 3rd Gen. Apple TV. All on the same home network and router. All three have Home Sharing turned on. All with the same account and all with the same password but they don't see each other. Since we're talking about three devices that don't see each other, I figure it must be something in the way I have it setup or Apple did away with the function.
     Can anyone point me in the right direction or shed some light on this problem.
     Thanks
          Ron   (hmbgeno)

Well I can tell you that Apple did not do away with it because I am still using home sharing. Maybe you should go through this support article.
Troubleshooting Home Sharing

Can you still use 4g if you buy ipad 4 at Korea and micro simcard at netherlands?

As it says,
If you buy an ipad 4 (with retina display) in Korea,
can you still use with Netherland's micro-simcard?

You can use it in the Netherlands, but only on a GSM network. LTE is not supported in the Netherlands at this time.
Regards.

Can you still use the ichat if you have the iCloud?

can you still use the ichat if you have icloud?

Seems to be a lot of discussion in the iChat Forum. Maybe you can get help there. Sorry!
https://discussions.apple.com/community/applications/ichat

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Using an iPhone without a wireless service plan

My iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

my iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

If you weren't able to sync the purchases to a computer previously and now your iPod needs to be restored so you can't sync it now, then you may be out of luck and will need to purchase your content again. Officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. The official statement of their policy can be found here, among other places.
You can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Good luck.

Can you still use itunes if you switch to an android?

My contract is almost up, and I was really considering getting an androind, GS4. But I still want to use itunes as my default audio player because I have never used anything else. So can you use an andriod on itunes? If not, is there some-other "player" that is as organized and such as itunes?

No
Try doing a Google search
Allan

Can you still use these Apps?

I have an update for an app that is already on my iPAD. The app's update is for iOS 7. Can I still use such an app on my iPAD just the way it is (in its current version) or do I have to update my iPAD's software to continue using the app. I mean, as long as the app is already on my iPAD, it shoild still work OK, right?

The copy of it will continue to work, but if it interfaces with the developer's website, that part of it may eventually stop working if it's not updated.
(94415)

Downgrading iTunes to version 8 - can you still access the iTunes Store ?

Well guys ? Those of you who have successfully downgraded to version 8..
Can you guys still access the iTunes Music Store ?
Can you still buy tracks , preview tracks the old way , and buy songs online with the iTMS & iTunes 8 ?

http://www.oldversion.com/iTunes.html
To downgrade from iTunes 9 to version 8 or 7.7 you can try the following on a Mac (Windows instructions follow):
- First acquire the correct software package. Select iTunes 8.0.2 or iTunes 7.7.1:
http://support.apple.com/downloads/iTunes8_0_2_forMac
http://support.apple.com/downloads/iTunes7_71
- Uninstall iTunes 9:
Open the Applications folder and move iTunes into the Trash
Restart the Mac and empty the Trash.
- Open your Music directory and open the iTunes folder
- Copy "iTunes Library.itl" and "iTunes Music Library.xml" to your desktop
- Copy "iTunes Library Extras" and "iTunes Library Genius" to your desktop
- DO NOT DELETE this music library iTunes folder
- Install the older version of iTunes
- Run iTunes and select "File" -> "Import"
- Choose the file "iTunes Music Library.xml" from the Desktop
- Your library and playlists will be rebuilt in the older version of iTunes
To downgrade from iTunes 9 to version 8 you can try the following in Windows:
- First acquire the correct software package. Select iTunes 8 from the following site:
http://www.oldversion.com/iTunes.html
- Navigate to your iTunes music library (normally in Music/iTunes)
- Copy "iTunes Library.itl" and "iTunes Music Library.xml" to your desktop
- Copy "iTunes Library Extras" and "iTunes Library Genius" to your desktop
- DO NOT DELETE this music library iTunes folder
- Uninstall all iTunes Software
- Use Control Panel uninstall to remove all of the following:
Apple Mobile Device Support, Apple Software Update, Bonjour, iPod for Windows, iTunes, QuickTime
- Under the folder c:\Program Files delete the following folders:
Apple Software Update, Bonjour, iPod, iTunes, QuickTime
- Search for any hidden folders named "Apple Computer" or "Apple"
- These may appear under AppData or Local/AppData
- Delete these folders
- Restart your Windows machine
- Install the older version of iTunes
- Run iTunes
- DO NOT SELECT options to automatically add media files
- Select "File" -> "Import"
- Choose the file "iTunes Music Library.xml" from the Desktop
- Your library and playlists will be rebuilt in the older version of iTunes

When Performing an Initial TM Backup can You Continue Using Your Mac?

I just backed up my MBP to TM and it took a long time. I'm about to start backing up my iMac; can I still be working on it while TM performs the first backup?
Thanks

Sure - on a slower computer you might notice some keyboard lag but on your G5 there shouldn't be any problem at all. I've never had any difficulties using my computers while TM runs.

Using multiple MIDI-in sources - can you now select the incoming MIDI port?

Exciting to see that Logic Pro X has launched at last!
I'm hoping someone who has already had a chance to download it can report back on a specific feature.
In previous versions of Logic, the only way to record multiple MIDI sources (for example a V-Drums kit and a keyboard) at the same time has been to make sure they are on different MIDI channels, and then choose the "auto demix MIDI channels" option in preferences.
In this way, the MIDI data is separated by channel and recorded to separate tracks.
However, it only separates the channels when two or more tracks are armed for recording, and does not offer any option for selecting the specific MIDI port for incoming MIDI signals.
DAWs such as Cubase and ProTools have always had a drop-down menu for MIDI channels, where the MIDI port can be chosen. This way, you can easily separate your MIDI controllers for either jamming or recording, and they will only play virtual instruments on tracks which are selected to their specific channel. This applies for recording as well as just jamming or trying parts prior to recording.
I have several hardware synths in my studio and often record MIDI jams with multiple players, and on that basis moved back to Cubase last year. I have been hoping Logic would update this feature for a long, long time!
Can anyone who is using Logic Pro X already confirm whether MIDI tracks now have a port select option, or whether the old channel-based system and the clumsy "auto demix MIDI channels" method remains...?
Cheers,
Mike

Guys, this is really quite simple to accomplish in the midi environment, susprised you've been hunting for so long for the answers, here's a quick step by step:
1. Go into Midi Environment
2. Change the view in the Environment window to show Click & Ports
3. To make things easier, click the 'Input Notes' label, and delete the object. And also click the 'Input View' label, and delete that also, so you're left with a blank canvas. (These are handy tools when testing, just deleting them to make things clearer).
You should now be left with just the Sequencer Input (And midi click, but ignore that) - Basically anything that connects into this input goes through as an input into logic... So, all we have to do now is to split each device into seperate channels. This is simply done through the 'transform' objects.
4. Add 2x Transformer objects via the 'new' menu (Or however many external inputs you need).
5. Drag the connection from each device listed on the left, to it's own transformer as shown:
6. Then plug each transformer into the Sequencer input
7. Double click each Transformer object and simply FIX the midi channel to be whatever you desire, in this example i've picked channel 2 and channel 3
8. Now, just make sure the 'Auto demix by channel if multitrack record' option is selected in project settings, and you're good to go!
Now just simply select the channel number that corresponds to the devices you transformed, and when more than one track is armed for recording it will be split to how you would like. *Please take note, that the demix only kicks in when multitracking, i.e. more than one track is armed*
Now, this seems really long winded on a forum with screenshots etc. - But it's truly not, takes about 30 seconds, and once you've done it a few times makes sense. Plus going through an environment like this opens up possibilites such as splitting one midi keyboard into different zones which can transmit to different channels, so you can have bass on your left hand, and lead on the right for example. But the midi data will split to each track when recording.
Reply back if you get stuck, more than happy to help!

When my phone is locked, why can I still use Siri to call and text?

So basically yesterday I was playing around on the lock screen with Siri.. And I noticed i can still call, text and search the Internet from the lock screen. Is this supposed to be possible? or a bug Apple have missed in the current version IOS? I only ask because surely if I lose my phone, any random member of the public could potentially use my phone to dial any number they wish.. even call abroad and run a phenomonly high phone bill very quickly.
Not having a moan just suprised it's possible to do this.. What's the point of a security lock code / fingerprint scanner if anyone can pick up my phone and use it?
Thanks in advance.

Stuthedon wrote:
So basically yesterday I was playing around on the lock screen with Siri.. And I noticed i can still call, text and search the Internet from the lock screen. Is this supposed to be possible? or a bug Apple have missed in the current version IOS? I only ask because surely if I lose my phone, any random member of the public could potentially use my phone to dial any number they wish.. even call abroad and run a phenomonly high phone bill very quickly.
Not having a moan just suprised it's possible to do this.. What's the point of a security lock code / fingerprint scanner if anyone can pick up my phone and use it?
Thanks in advance.
So, when you're using Siri, how are you activating it? By pressing the Home Button?
Do you have Touch ID enabled?
Are you using a finger on the Home Button that is enrolled in the Touch ID?

If you have purchased a used iPhone which still has the warranty one it can you still use it even thought its a used phone ?

my dad had purchased an i phone 5 from someone who was selling who had gotten it from soneone else it i have gotten it unlocked and it has been unlocked it is not reported stolen or anything i used and online imei checker and it says the warenty exprires jan 15 2014 i just want to know if i can use that warenty even though i do not know the apple id it is regersterd on or anything ? also what is the canadian number i can call to get this info if you dont know the =answer

The warranty follows the device, not the owner. If you have the device, if there is a warranty issue with the device, you can get it replaced. If you got it officially unlocked by the carrier it was locked to, then you have nothing to worry about it locking back if you do a restore. You may, however run in to activation problems if the device has iOS 7 on it. You will need the Apple ID and password for the person that originally activated the phone, and it sounds as if it has changed hands several times. If you cannot find that original Apple ID and password, then the phone will not be able to activate and no one will be able to help you with that, including Apple.

Can you still use soft motion without the scan engine on crio?

Where are the trajectory generator property and invoke nodes in softmotion for LV 2011?
These functions are not longer found in the pallet? Are they no longer supported?
All the new soft motion examples are using the scan engine. Can I use soft motion without the scan engine????
Steve
SteveA
CLD
FPGA/RT/PDA/TP/DSC

Hi Ian,
I apologize that this wasn't stated in the release notes. While your code should have upgraded without breaking, the release documentation should have mentioned that the advanced trajectory genertor functionality is no longer supported. If you still want to use the trajectory generator functions, they are still shipped with SoftMotion, they are just not on the palette. I have attached a zip file that has 4 .mnu files that will get them on the palette. To install these, do the following:
Close LabVIEW
Make a copy of the following directory: C:\Program Files (x86)\National Instruments\LabVIEW 2011\menus\Categories\VisionMotion\_nism. In case something goes wrong, we will want to have a copy of this directory so that we can replace it.
Copy the 4 .mnu files from the attachement into the above _nism directory (the original, not the copy). If it asks you to replace any of the exisiting files, please do. You don't have to copy the readonly.txt file.
Start LabVIEW. You should know have the trajectory generator functions in your SoftMotion Advanced palette.
Keep in mind that we no longer support these functions. This means that they are not tested in new releases and any bugs will likely not get fixed.
I would recommend that you use the new API for any new designs. You can still get most of the functionality of the old API but without the complexity. If you want to generate setpoints at 5ms then you will run the scan engine at 5ms. This is certainly easier than having to do the timing yourself, but it does take away some control from the user. If you give me a brief overview of what you mean by synchronization, I will let you know the best way to do it with the new API.
Thanks,
Paul B.
Motion Control R&D
Attachments:
_nism.zip ‏4 KB

Can you still use iweb?

if iweb is installed on our computer is it still supported, can you start building pages and publish? I hear it is being replaced by easyweb. I have iweb on a two year old Apple but it is not installed on my new MacBook Pro.

What system are you running? iWeb 2 (08) does not work with Mt. Lion. It crashed when publishing to a folder on the hard drive which is the only option iWeb 2 has.
if you get iWeb 3 from an iLlife 09 or later disk be aware of these restrictions:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

When using IOS6 do not disturb, can you still use the alarm clock apps?

Similar Messages

Maybe you are looking for