When using MT ni5660 phase noise.vi readings at 10KHz and 100KHz offset are both -88dBc/Hz.
Hi
I am trying to measure phase noise at 10KHz and 100KHz offset using MT ni5660 phase noise vi as shipped with modulation toolkit. Both results at offsets are -88dBc/Hz, I am expecting -62dBc/Hz at 10KHz offset and -85dBc/Hz at 100Khz offset as measured on hp8560A spectrum analyser. I am using pxi 5600 downconverter and pxi 5620 digitizer with labVIEW 2012. I have only been using PXI for a little while so am not to familiar with it. Any ideas as too what i am doing wrong or have not set up correctly.
Hi Hands
Thanks for your post. Do you get this only when you have 10KHz or 100KHz? I'm curious to know what this device displays at other frequency ranges if possible?
Many thanks
Dan.H
National Instruments
UKAE
Similar Messages
-
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
why cant i download all of the itunes songs off my wifes purchased itunes account when using the family sharing? some songs i can and some it wont let me
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?
Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far... -
what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...
Mine has four Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out. True you can only use one feed at a time nut you can only use one port on the telly at one time too. I used it on my old one port telly for PS3 and Sky and it worked a treat.
Enjoy
Jules -
When i did the last update my pictures got scrambled and the dates are gone
When I did the last update my pictures got scrambled and the dates are gone and there's strange numbers and letters underneath them.
It says that to download past purchases, they must done under the apple ID that was used to purchase the items. I have an original ID for my iTunes on my computer. At some point I changed my apple ID on the iTouch since that email account was deleted. So I was syncing through iTunes under a different ID then was on my iTouch. Can I do anythng about that so I can check past purchases?
Since the apps aren't in the backup, how do I transfer the apps on my iTouch to my iTunes? -
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???
I can see the block (flashes) and the buttons are no longer usable.
I have Empted Cache but doesn't seem to help.From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
My iPod Touch 4 repeatedly gets the iPod too hot message, even when the device and ambient temp are both cool. Shuts itself off. Ugh!
Is this a warranty issue or is there a fix?LED Cinema Display
24-inch, Late 2008 (1344 x 840)
AMD Radeon HD 6750M 512 MB graphics
Specifications
 Model number: A1267
 Resolution: 1920 x 1200 @ 60 Hz
 Ports: Three USB 2.0 ports on the back
 Camera and microphone: Built-in iSight camera with microphone  Speakers: Built-in 2.1 speakers with 12 W output
Dimensions:
 Weight: 20.92 lb. (9.49 kg)
 Height: 18.84 inches (478.38 mm)
 Width: 22.57 inches (573.22 mm)
 Depth (with stand): 7.76 inches (197.10 mm)  Viewable: 24 inches (609.60 mm) diagonal
Operating environment:
 Operating temperature: 50° to 95° F (10° to 35° C)  Relative humidity: 20% to 80% (noncondensing)  Altitude: 0 to 10,000 feet (0 to 3048 meters) -
Where the B and i and other things are showing here are blank when
I bring up Yahoo mail.If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
When using FF 5.0, rollover type ads (i.e. ads for XBOX) on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX on an HP Pavillion dv7 laptop. Does NOT happen at all in MS IE 8, but occurs every time in FF 5.0.
Also, Google 'translate this page' links do not work in FF 5.0, but works in MS IE 8. All I get in FF is a blank page, time after time.Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above. -
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
My mouse is not working with my computer. The batteries are good. The cursor arrow will move where I want it but when I click,nothing happens! Ugh! Is it thecomputer or the mouse? How can I fix it if the mouse doesn't work?
I was having all kinds of crazy mouse and trackpad problems after installing Lion.Reset PRAM and that helped briefly. Then found out my main battery was bad. Now that I have replaced it my mouse and track pad are behaving. It may have been coincidence or it may be that Lion is more sensitive to battery issues?
Worth checking your battery as this can cause all kinds of problems apparently..... -
When using a URL it always asks for a username and password
I’ve just started using the Windows version of OracleXE.exe with Apex3.1 and I would like to create a menu web-page holding a list of URL’s that can be configured by inserting records into a simple table. I am having problems with multiple authentication user-name and password. I can read the table and create a URL within a web-page swapping the text “#SESSION#” with the &Session.
But each time I open a new application within the same schema I get the login page (when that user has already connected with their password).
Test data:
create table x_url_table(url varchar2(256),display_text varchar2(32));
insert into x_url_table values ('http://127.0.0.1:8080/apex/f?p=106:1:#SESSION#:::','query country details');
insert into x_url_table values ('http://127.0.0.1:8080/apex/f?p=108:2:#SESSION#:::','simple select as a test ');
From the Application Builder page I choose:
"Create" -> "Create Application" -> “add Page" [I entered the table name x_url_table[and implementation set to classic]] -> “Next” [no tabs] -> “Next” [no for shared components] -> “Next” [Application Express for Authentication] -> “Next” -> “Create”
When I press the run-page-icon it displays the URL like below(if I click-it it does not open webpage):
http://127.0.0.1:8080/apex/f?p=106:1:#SESSION#::: query country details
http://127.0.0.1:8080/apex/f?p=108:2:#SESSION#::: simple
I then tried “edit-page”-> “edit-region” -> “region source” I swapped the SQL for this:
SELECT
replace(a.url ,'#SESSION#','&SESSION.') as url
, a.display_text
FROM x_url_table a
Plus I then added a link “edit-page”-> “edit-region”-> clicked the tab “Report Attributes”->clicked the “add column link”
Scroll down to “column link”
“Link Text” I set to #DISPLAY_TEXT#
“Target” choose the L.O.V option “URL”
“URL” I set to #URL#
Push apply button
Press the run-page icon it displays everything correctly (see below) but when I click-the-URL it asks me again for the login screen with a user/password request.
Can this be bypassed?
As, I am already connected to the schema using the same username and password!
How do I allow my current session to automatically log me in to a different page?
link Url Display Text
query country details http://127.0.0.1:8080/apex/f?p=106:1:1331572188999480::: query country details
simple select as a test http://127.0.0.1:8080/apex/f?p=108:2:1331572188999480::: simple select as a test
so what do I need to do login just once!Steve,
See this thread:
Application Link
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
I access the same Firefox profile in Ubuntu 12.04 and Windows 8.1 (Windows fast startup disabled). I have the newest version of Firefox (26.0) on each system.
Every time I launch Firefox in Ubuntu after using the profile in Windows, I notice that autoscrolling is disabled. So I have to manually enable it every time after using my profile in Windows.
Conversely, every time I launch Firefox in Windows after using the profile in Ubuntu, I'm asked whether I would like to set Firefox as my default browser. I choose "No", first making sure that there is no check mark next to "Always perform this check when starting Firefox". I have to do this every time after using my profile in Ubuntu, despite the fact that if I check my preferences in either OS, "Always check to see if Firefox is the default browser on startup" is not enabled. Note that Firefox is my default browser in Ubuntu but not in Windows, but I have no need for Firefox to check whether it's the default every time it starts in either OS.
I don't know whether these problems are related, but it seems likely that they are. Is there a way that I can keep these settings constant, so they don't reset every time I switch operating systems?I'm sure that when I close the browser in either OS before switching to the other, the following two conditions are true in the Advanced tab of the Firefox Preferences menu:
1) "Use autoscrolling" is enabled (with a check mark)
2) "Always check to see if Firefox is the default browser on startup" is disabled (no check mark)
The autoscrolling feature allows you to scroll by holding down the middle mouse button and moving the mouse up and down. The extension you linked to, ScrollyFox, enables scrolling by clicking a button in the Firefox UI, which is quite a different feature. So unfortunately the problems still remain.
Maybe you are looking for
-
Database files into a single disk or multiple disk ?
Hi All, I want to install oracle database 11gR2 in to database server. This database server has three internal disk so I plan to put DBF,redo and ctl file in to different disk.. but this is the optimal configuration by putting all the Database files
-
Flex 4.5.1 iOS project with AIR 2.7
Hi, A few things. This may be a mix of builder and sdk. I read that 4.5.1 Flex Mobile automatically used AIR 2.7 . I have not done any overlaying b/c of this but my app on the device is slow. When I click a list item or Back button, it takes like 2
-
VPN crashing Mountain Lion Finder
When using the VPN with Mountain Lion over IPSec using ShareSecret (I'm using an installed Profile) if I disconnect the whole OS goes crazy and Safari Hangs, and then eventually the toolbar widgets spin the wheel of death, I then tried to kill com.ap
-
With the Yahoo Firefox version -- 16.0.2 -- how do I delete a folder, empty or with items in it?
I'm able to delete book mark items within a folder, but unable to delete an entire folder with items in it, or an empty folder. It appears that this version is too recent for any of the previous help items to be of any assistance. My Mac Desktop oper
-
1) I converted a tables layout to AP Elements and the code is awful. Meaning that everything is tight up against each other with no spaces and it's difficult to find anything. I'd like to set the div's so that there is an extra space after the </div