When using pc banking with bnpparibasfortis, transfer orders with future date in august of september don't work with nightly.
restart with addons disabled doesn't solve the problem. fill in the date manually in stead of using the calender of the website doesn'make any difference. amount; benificiary neither.
june; july; october work fine. the problem is relatied to nightly: the bank web site works with google chrome (and probably with other browsers).
i receive no error message, but either the reply to the bank's server is in wrong format; or the signal is rejected by nightly or java.
Whoops, I just realized that you are using the Win64 version of Nightly!
It's not even being actively developed right now; further development has on hiatus for quite awhile now. The build server is just spitting out new versions to make sure a change in the 32-bit Windows build doesn't break something that would need to be fixed in the future once Win64 development is resumed.
That said, do you have a 64-bit version of Java installed?
Your system details doesn't indicate that Java 64 is installed or Night isn't finding it.
As far as the problem you are having, check the Browser Console for errors related to your bank domain.
https://developer.mozilla.org/en-US/docs/Tools/Browser_Console
Might have a clue as to your problem.
Similar Messages
-
Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaRevision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java -
Strange behaviour when using connection pooling with proxy authentication
All
I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
* User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
* User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
Regards,
ChrisHi Chris,
I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
Cheers
Greg -
Scope when using a JavaBean with JSP
what is the meaning of this question .....?
"Which of the following can not be used as the scope when using a JavaBean with JSP? "
question 4
site :http://java.sun.com/developer/Quizzes/jsptut/The question is clearly written. I don't see how you can be confused. But let's assume you are since you would not have posed the question.
Dumbed-down:
There are 4 scopes or areas of variable visibility in JavaServer Pages. Which of those can areas can not be used with JavaBeans?
Does that help? -
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYDBARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Question
When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a probleCan you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox -
How to avoid data repetation when using select statements with innerjoin
how to avoid data repetation when using select statements with innerjoin.
thanks in advance,
satheeshyou can use a query like this...
SELECT DISTINCT
frg~prc_group1 "Product Group 1
frg~prc_group2 "Product Group 2
frg~prc_group3 "Product Group 3
frg~prc_group4 "Product Group 4
frg~prc_group5 "Product Group 5
prc~product_id "Product ID
txt~short_text "Product Description
UP TO 10 ROWS
INTO TABLE l_i_data
FROM
Joining CRMM_PR_SALESG and
COMM_PR_FRG_ROD
crmm_pr_salesg AS frg
INNER JOIN comm_pr_frg_rod AS prd
ON frgfrg_guid = prdfragment_guid
Joining COMM_PRODUCT and
COMM_PR_FRG_ROD
INNER JOIN comm_product AS prc
ON prdproduct_guid = prcproduct_guid
Joining COMM_PRSHTEXT and
COMM_PR_FRG_ROD
INNER JOIN comm_prshtext AS txt
ON prdproduct_guid = txtproduct_guid
WHERE frg~prc_group1 IN r_zprc_group1
AND frg~prc_group2 IN r_zprc_group2
AND frg~prc_group3 IN r_zprc_group3
AND frg~prc_group4 IN r_zprc_group4
AND frg~prc_group5 IN r_zprc_group5.
reward it it helps
Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM -
How do you stop needing to verify email password when using yahoo.att with Mac Mail
How do you stop needing to verify email password when using yahoo.att with Mac Mail?
Nevermind, I fixed it (I think). I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically). I selected it and it had an optiion to delete the account, which I did.
-
why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.
-
when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?
Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Hi All,
Can we create order for future date, if yes..then what are the settings required for correct delivery date and pricing date to flow
Help required
Regards
Edited by: Anil SD on Jan 3, 2008 9:59 AM
Edited by: Anil SD on Jan 30, 2008 7:43 AMHi,
It is possible to create an order in the future data. However, to regularise the options in Sales order for Delivery date and Pricing date, please go to doc. type config. using T.Code VOV8 and select the order type. Down there you can see a section for " Requested delivery data/pricing date/purchase order date". You can manipulate using the options there - whether or not you want a delivery date to be proposed in your sales order & also if you want to have the delivery date as the pricing date as well - i think this should meet your requirement.
Award points if useful.
Regards,
Jn. -
I can't update my apps even when I do App Store>purchased> select all...... It don't work for me
When you tap on All at the top. That shows all of you purchased apps. You still have to manually go through each letter (on the left side) and look through every page of apps in order to find the apps that need an update. It is a pain and its time consuming, but that's how you have to do it.
Is that what you are doing and it's not working for you? -
When I use time machine with my external harddrive to back up computer, some music from iTunes library, and some photos from iPhoto library are missing when I check backup disk. I am using latest version of mountain lion. Am I doing something wrong?
First, Time Machine doesn't completely back up the iPhoto library while iPhoto is running. Make sure you quit iPhoto after making any changes to allow a backup to take place.
This simple procedure will clear your Time Machine settings, including both overt and hidden exclusions. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop. -
Cannot get hardware limits to work when using Lintech switches with a ACR9000 motion controller
This has been my conversation with Parker Automation.
From: Susan Connors <[email protected]>
Date: April 21, 2015 at 8:52:55 AM CDT
To: Bowlerdusty <[email protected]>
Subject: Re: ACR 9000
Hi Dustin,
Since the product was not purchased from us, or through the Parker website, but through National Instruments, you would need to contact them and they should be able to help.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company - Automation Group
Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
Toll Free: 1-800-866-4568 ext 5352
On Mon, Apr 20, 2015 at 4:16 PM, Bowlerdusty <[email protected]> wrote:
Hi again. Since last speaking, we have gotten the motor to move. The only thing we are struggling on now is getting the hardware limits to work. We are using switches provided by Lintech. One pair of switches is mechanical and the other pair are non-contact reed switches. I found out earlier that the product was purchased from National Instruments Co. Anyway we could receive some help with this?
Thanks,
Dustin Brown
-----Original Message-----
From: Susan Connors <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Tue, Feb 3, 2015 12:52 pm
Subject: Re: ACR 9000
Dustin,
I am checking with our manager and engineers on this and will let you know.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
On Mon, Feb 2, 2015 at 3:10 PM, Bowlerdusty <[email protected]> wrote:
Could it possibly be under some other name? There are other divisions it could possible be under. This place is also under the U.S. Army Corps of Engineers, so it might be under that name. And if this wasn't purchased from this company, then where was it purchased from? This is the company I was sent to when I contacted the Parker Motion support.
-----Original Message-----
From: Susan Connors <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 4:13 pm
Subject: Fwd: ACR 9000
Hello,
We have checked and show no record of your company or this part being purchased from us, so this is not something that we can offer support.
I do not know of an integrator in your area but you should contact a local one that could possibly help you trouble-shoot any questions you have on this unit.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
---------- Forwarded message ----------
From: Bowlerdusty <[email protected]>
Date: Fri, Jan 30, 2015 at 3:59 PM
Subject: Re: ACR 9000
To: [email protected]
Any idea of when I'll get a response?
-----Original Message-----
From: AG Sales Fax <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 11:03 am
Subject: Fwd: ACR 9000
-- Can you please advise Company name and location so I can forward to appropriate contact?
---------- Forwarded message ----------
From: 'Bowlerdusty' via [email protected] <[email protected]>
Date: Fri, Jan 30, 2015 at 10:32 AM
Subject: ACR 9000
To: [email protected]
I was told to contact you guys for help with this. Can you be of some assistance?
-----Original Message-----
From: jhoagland <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Thu, Jan 29, 2015 3:44 pm
Subject: Re: ACR9000
There are free training videos on our website:
http://www.parkermotion.com/products/Controllers__6934__30_32_80_567_29.html
This unit was purchased through Cross Automation.
They are your local Parker ATC distributor and can give you assistance though the unit is out of warranty.
Their phone number is: 704-523-2222
Let me know if there’s any questions. Have a nice day.
Regards,
Jonathan
-----Original Message-----
From: Bowlerdusty < [email protected]>
To: emn_applications < [email protected]>
Sent: Thu, Jan 29, 2015 2:57 pm
Subject: Fwd: ACR9000
Here is a pic of the serial number and model number.
-----Original Message-----
From: emn_applications < [email protected]>
To: Bowlerdusty < [email protected]>
Sent: Thu, Jan 29, 2015 11:36 am
Subject: Re: ACR9000
On the other side of the ACR9000 is a label with the model number, SO and
serial number. Please provide.
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Bowlerdusty <[email protected]>
To
[email protected]
01/29/2015 09:19 AM
cc
Subject
Re: ACR9000
I honeslty don't know this information. This stuff was bought at least a
few years ago. A student who is now gone had put it together a while back.
There were a lot of binders with it for instructions but none of it was
very clear to me. I'm sending pictures with the parts I have
(controller,drive,motor,etc.).
-----Original Message-----
From: emn_applications <[email protected]>
To: Dustin Brown <[email protected]>
Sent: Wed, Jan 28, 2015 10:17 am
Subject: Re: ACR9000
OK. So now you'd program it using the Configuration Wizard in ACR-View and
the program editor.
Which Parker ATC distributor did you purchase this through?
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Dustin Brown <[email protected]>
To
[email protected]"
01/28/2015 07:58 AM <
[email protected]>
cc
Subject
Re: ACR9000
Hi thanks for the reply. We got it connected via Ethernet now. We had to
change the IP address of "local area connection" on the computer to
192.168.10.1 for it to see the controller. So now that it is connecting to
the controller, it keeps saying that the drives are all disabled. I have
one drive connected to the controller in the Axis 0 port.
Sent from my iPhone
On Jan 27, 2015, at 3:56 PM, [email protected] wrote:
> Did you change your PC's IP address?
>
> VIDEO: How to set your PC's Ethernet IP address
>
http://www.parkermotion.com/dmxreadyv2/faqsmanager/faqsmanager.asp?category=116&knowledgebase=faqman...
>
>
> Default is 192.168.10.40
>
> Is this a new ACR9000?
> If you don't know the IP address and the default doesn't work, you'll
need
> to connect via USB or serial to get the IP address or reset it.
>
> Regards,
>
> Jonathan
>
> ________________________________________________________________________
> Application Engineering Team
> [email protected]
> phone 800-358-9070 · international 1-707-584-7558
> www.parkermotion.com
> Parker Hannifin Corporation · Electromechanical Automation, NA
> 5500 Business Park Drive · Rohnert Park · CA · 94928
>
>
>
>
>
>
>
> Bowlerdusty <[email protected]>
To
>
[email protected]
> 01/27/2015 01:48 PM
cc
>
>
Subject
> ACR9000
>
>
>
>
>
> I am having a little trouble getting a connection between the ACR view
> software and the ACR 9000. I am attempting to use an ethernet cable for
> the connection. Every time I press the "connect" button it says "Failed
> attempting to connect to controller". Do you have any advice?
>
> Thanks,
> Dustin Brown
>
>
>
>
(See attached file: IMG_0864.JPG)(See attached file: IMG_0865.JPG)(See
attached file: IMG_0866.JPG)(See attached file: IMG_0867.JPG)(See attached
file: IMG_0868.JPG)(See attached file: IMG_0869.JPG)
1 Attached Images
Solved!
Go to Solution.
Attachments:
image.jpg 938 KB
image.jpg 1570 KB
image.jpg 767 KBHi thanks for the reply. Yes I have used the ACR view to specify which inputs to use before. I used input 0 for the positive limit, input 1 for the negative limit, and input 2 for the home switch. However, when using ACR view the switch kept displaying that the switch had been tripped when nothing was pressing against it. I would also try pressing on the mechanical switch to see at least if the value would change but to no avail.
Attachments:
image1.JPG 1642 KB
image3 (1).JPG 3768 KB
image2 (1).JPG 3247 KB -
Exception report when using tomcat 5 with JDBC
i followed this guide to setup the JDBC with my TOMCAT 5
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jndi-datasource-examples-howto.html#Database%20Connection%20Pool%20(DBCP)%20Configurations
but i seem to get this error
exception
javax.servlet.ServletException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'"
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)
org.apache.jsp.SID.test_jsp._jspService(test_jsp.java:81)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'"
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:276)
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:159)
org.apache.jsp.SID.test_jsp._jspx_meth_sql_query_0(test_jsp.java:100)
org.apache.jsp.SID.test_jsp._jspService(test_jsp.java:58)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
i can compile *.java and run them when they need the jdbc drivers to interact with mysql 5 database.
This is my server.xml
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- Comment these entries out to disable JMX MBeans support -->
<!-- You may also configure custom components (e.g. Valves/Realms) by
including your own mbean-descriptor file(s), and setting the
"descriptors" attribute to point to a ';' seperated list of paths
(in the ClassLoader sense) of files to add to the default list.
e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
-->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<Connector port="8080"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
debug="0" connectionTimeout="20000"
disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" debug="0" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" debug="0"
protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
<Engine name="Standalone" defaultHost="localhost" debug="0" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
debug = the debug level, higher means more output
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code:
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Context path="/testdb" docBase="APACHE_DIR/htdocs/testdb"
debug="5" reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<!-- Maximum number of dB connections in pool. Make sure you
configure your mysqld max_connections large enough to handle
all of your db connections. Set to 0 for no limit.
-->
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
<!-- Maximum number of idle dB connections to retain in pool.
Set to 0 for no limit.
-->
<parameter>
<name>maxIdle</name>
<value>5</value>
</parameter>
<!-- Maximum time to wait for a dB connection to become available
in ms, in this example 10 seconds. An Exception is thrown if
this timeout is exceeded. Set to -1 to wait indefinitely.
-->
<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>
<!-- MySQL dB username and password for dB connections -->
<parameter>
<name>username</name>
<value>test</value>
</parameter>
<parameter>
<name>password</name>
<value>testpwd</value>
</parameter>
<!-- Class name for mm.mysql JDBC driver -->
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<!-- The JDBC connection url for connecting to your MySQL dB.
The autoReconnect=true argument to the url makes sure that the
mm.mysql JDBC Driver will automatically reconnect if mysqld closed the
connection. mysqld by default closes idle connections after 8 hours.
-->
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost/testdb?autoReconnect=true</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>
</Server>You haven't added a resource reference for your web application that gives the application a local name for the global resource "UserDatabase".
Maybe you are looking for
-
Flex Application architecture with web and air interface both using common components.
We have a flex based e-learning application. It uses HTTP REST service and webservice to communicate with ASP.Net application to fetch and store data. We now want to develop an adobe air version of the user interface, which the students can download
-
TS2972 Appletv can't download the library from the iMac
Appletv can't download the library from the iMac though it is able to download from the MacPro. I select the library and it spins for a while then directs to check connections and network. Music can be played via Airplay from the iMac so there is s
-
Any one has experience to share full harddisk ghost backup on Ideapad U165?
My friend have me his new Ideapad U165 for testing the notebook for him. I would like to backup with ghost before I start the system. Should I remove the whole to perform from other Desktop/laptop through SATA>USB converter cable? Friend of mine re
-
Can I sync and/or stream to more than one AppleTV? I would be interested in having one in my basement and one in my bedroom.
-
How to make glitching letters like these:
Hello, recently i've decided to make an intro for my youtube channel and i'd like to something like he first 10 seconds of Knife Party's 'Bonfire'*(link in the end). I am a newcommer to After effects and i'm using after effects CS4. could someone do