When using pdfFactory with Firefox, why are the colors on the pdf not correct?

The colors are vastly different when using pdf Factory with Firefox. When using pdfFactory with IE, they are both the same.

There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel

Similar Messages

When using Facebook with Firefox the pointer always has a little round circle by it rotating as if it is doing something. This happens when I play games on facebook and after I downloaded the new version of Firefox. How can I make this stop?

Using Facebook the pointer on the screen has a circle by it that is rotating when I play games. Acts like it is doing something, I would like to know if there is a fix for this?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Why iphone5 getting hot at the back when using wifi only?, Why iphone5 getting hot at the back when using wifi only?

Help

It all depends upon your configuration.
You should first determine in a case like this if your iPhone or other device has been assigned a valid DHCP address.
If you see a value like 169.x.x.x, you have not been assigned a valid DHCP address. This may occur for many reasons, most often because the DHCP server component of your router is not issuing them, or your device is not commmunicating with it. Valid DHCP addresses are generally in the ranges of…
• class A: 10.0.0.1 through 10.255.255.255
• class B: 172.16.0.1. through 172.31.255.255 and seldom used, and
• class C: 192.168.0.1 through 192.168.255.255
If you have a valid DHCP address, then the issue is likely that your router is not properly configured, in that it does not have valid DNS server addresses stored in its configuration files.
Generally, a router or gateway requires that you configure its assigned address, a valid subnet mask, and primary and secondary DNS servers. While you can use any valid DNS address for primary, secondary, tertiary and subsequent server entries, by convention, most technicians set the pair assigned by the internet service provider for your service area. In Eugene OR, for example, Comcast DNS addresses are set to…
• primary: 68.87.69.146 and
• secondary: 68.87.85.98
Check to see that your router or gateway configuration contains such information, as the result of being issued a valid DHCP address but not being able to identify a DNS server leads to the sort of issue outlined by the original poster.
You can easily determine if this is the case by querying a known site by its numeric address, rather than by its canonical name. If one takes you to the site but the other fails to do so, then you have the DNS issue I referred to.

8.1.5; why are .png colors inverted automatically but not .bmp?

Adobe Acrobat Professional 8.1.5
When using PDF creator to convert image files to pdf's; scanned images (from blueprints) with black backgrounds and white text/lines:
if file type = .png colors are automatically inverted. (white background black text/lines)
if file type = .bmp, colors are not inverted.
Why is this?
Is there a way to invert colors for .bmp?
Thanks.

Does anyone else have any other suggestions? I work at a firm where Photoshop is not available so this is not an
option.
Thank you!

When accessing eBay with Firefox and launching a search, I get less results/hits with Firefox then when using Internet Explorer, why? Try it, you'll see.

For example access eBay with Firefox and launch a search on the word Frankenstein: you'll get something like 23,671 results (if you search in ''All categories''). Then quit the Firefox browser and load Microsoft Internet Explorer instead; access eBay again and repeat the very same search: this time you'll get 25,383 results. These are reral figures that I tried at 19:21 on March 20, 2014. Why does a search on eBay through Firefox report less hits than the very same search through Internet Explorer? Using Firefox rather than Microsoft Internet Explorer automatically means missing hits/results/items on eBay: that doesn't make sense but it does happen. Why is it so? Thank you, somebody, for shedding light on this problem.

Try this steps and try to load the same once again!!!
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

When using Numbers with iCloud, a new version of the spreadsheet is created even when no reisions have been made. Why is this, and how do I make it stop?

When using Numbers with iCloud, a new version is created every time I make a change. I do not want all these revised documents. When I change a document, I commit to that change. How do I shut off this multiple-revision feature of Numbers being pushed to iCloud.
Also....
When using Numbers with iCloud, a new version of the spreadsheet is created even when no revisions have been made. Why is this, and how do I make it stop?
My files are growing.

Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.5.0_11 for Netscape Navigator (DLL Helper)
# Adobe Shockwave for Director Netscape plug-in, version 11.0
Update the [[Java]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/shockwave/welcome/

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
 Cheers, Tom

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply.

When I first download Firefox there are no toolbars of any sort,just the name Firefox plus small arrow, so how do i access them?

When I first loaded Firefox4 there are no toolbars, just the name Firefox (with small arrow) plus Google. Clicking the arrow does not offer access to the toolbars so how doI get them ?

You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

When I use Siri with Voiceover on my iPHONE 4S. Voiceover will not respond to any finger jestures. Why does this happen?

When I use Siri with Voiceover on my iPHONE 4S. Voiceover will not respond to any finger jestures. Why does this happen?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

HT204291 When using my iPad and playing videos, I only hear the sound. Why will it not show the video?

When using my iPad and playing videos, I only hear the sound. Why will it not show the video? My iPad 2 and iPhone 5 work no issues.

Hi sheilafrommannford,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the links to see more details and screenshots.
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Judy

Only 274 mails are coming when using pop3 with java mail

Only 274 mails are coming from GMAIL when using pop3 with java mail. but there are more than 3000 mails.
I'm not getting the reason, code is given below:
public static void main(String[] args) {
 // SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!!
// String host = "pop.bizmail.yahoo.com";
// final String user = "[email protected]";
// final String password = "xxx";
 String host = "pop.gmail.com";
 final String user = "gauravjlj";
 final String password = "xxx";
 String subjectSubstringToSearch = "Test E-Mail through Java";
 try {
 Properties prop = new Properties();
 prop.setProperty("mail.pop3.socketFactory.class",
 "javax.net.ssl.SSLSocketFactory");
 prop.setProperty("mail.pop3.socketFactory.fallback", "false");
 prop.setProperty("mail.pop3.port", "995");
 prop.setProperty("mail.pop3.socketFactory.port", "995");
 prop.put("mail.pop3.host", host);
 prop.put("mail.store.protocol", "pop3");
 Session session = Session.getDefaultInstance(prop);
 Store store = session.getStore();
 System.out.println("your ID is : "+ user);
 System.out.println("Connecting...");
 store.connect(host, user, password);
 System.out.println("Connected...");
 // Get "INBOX"
 Folder fldr = store.getFolder("INBOX");
 fldr.open(Folder.READ_ONLY);
 int count = fldr.getMessageCount();
 System.out.println(count + " total messages");
 // Message numebers start at 1
 for(int i = 1; i <= count; i++) {
 // Get a message by its sequence number
 Message m = fldr.getMessage(i);
 // Get some headers
 Date date = m.getSentDate();
 Address [] from = m.getFrom();
 String subj = m.getSubject();
 String mimeType = m.getContentType();
 System.out.println(date + "\t" + from[0] + "\t" +
 subj + "\t" + mimeType);
 // Search for e-mails by some subject substring
 String pattern = subjectSubstringToSearch;
 SubjectTerm st = new SubjectTerm(pattern);
 // Get some message references
 Message [] found = fldr.search(st);
 System.out.println(found.length +
 " messages matched Subject pattern \"" +
 pattern + "\"");
 for (int i = 0; i < found.length; i++) {
 Message m = found;
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
Object o = m.getContent();
if (o instanceof String) {
System.out.println("**This is a String Message**");
System.out.println((String)o);
else if (o instanceof Multipart) {
System.out.print("**This is a Multipart Message. ");
Multipart mp = (Multipart)o;
int count3 = mp.getCount();
System.out.println("It has " + count3 +
" BodyParts in it**");
for (int j = 0; j < count3; j++) {
// Part are numbered starting at 0
BodyPart b = mp.getBodyPart(j);
String mimeType2 = b.getContentType();
System.out.println( "BodyPart " + (j + 1) +
" is of MimeType " + mimeType);
Object o2 = b.getContent();
if (o2 instanceof String) {
System.out.println("**This is a String BodyPart**");
System.out.println((String)o2);
else if (o2 instanceof Multipart) {
System.out.print(
"**This BodyPart is a nested Multipart. ");
Multipart mp2 = (Multipart)o2;
int count2 = mp2.getCount();
System.out.println("It has " + count2 +
"further BodyParts in it**");
else if (o2 instanceof InputStream) {
System.out.println(
"**This is an InputStream BodyPart**");
} //End of for
else if (o instanceof InputStream) {
System.out.println("**This is an InputStream message**");
InputStream is = (InputStream)o;
// Assumes character content (not binary images)
int c;
while ((c = is.read()) != -1) {
System.out.write(c);
// Uncomment to set "delete" flag on the message
//m.setFlag(Flags.Flag.DELETED,true);
} //End of for
// "true" actually deletes flagged messages from folder
fldr.close(true);
store.close();
catch (MessagingException mex) {
// Prints all nested (chained) exceptions as well
mex.printStackTrace();
catch (IOException ioex) {
ioex.printStackTrace();
Please tell me.
Thanks

Is it possible that GMail only allows access to untagged emails via POP3? Or only to emails from the last x days?
POP3 is the older email retrieval protocol (IMAP4 is the more current one) and only has very limited support for folders (or anything but a single inbox, really). It's quite common that POP3 only allows access to a subset of all emails stored by a provider.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

HT204347 When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

When I use FaceTime with friends who are currently outside of UK, I cannot make my voice heard after about 20mins' chatting. While this situation will be better if I restart my MBP,but only better in around 20mins.

When using pdfFactory with Firefox, why are the colors on the pdf not correct?

Similar Messages

Maybe you are looking for