When using podcast i switch to radio-canada live and it start to stop and restart it and voice control start and stop by it self

When i listen music on my iphone 4 using podcast (training session workout) i switched to radio-canada live and after a while it start to stop and start radio-canada live and voice control stop and start by itself???

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Similar Messages

OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

What OS version are you running?
Try the upgrade button here:
http://www.apple.com/osx/how-to-upgrade/

Hello all, I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings Gene

Hello all,
I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings>General>Siri. At the General menu "Siri" doesn't appear. What should I do to set Siri up if it doesn't appear at settings>general?
Thank you,
Melanie.

Go to Settings>General>Restrictions and make sure Siri is set to On.

VM Activation problem when using Internal Virtual Switch mode

Hello,
I have setup Windows 2012 R2 Standard Version host machine. Hyper-V setup successful. Host machine already activate license.
I have got a problem is when VM connecting with Internal virtual Switch. It will not able to process Windows activation. If it connected using External Virtual Switch, it can successful do windows activation. However, using External Virtual
Switch, one more WAN IP will be used.
I am using ICS method to share the network interface to Internal Virtual Switch.
Is it what problem and how to resolve it?
Thanks!

Hi Gyorgy,
What is the version of your guest operating system? Why not we create an External Virtual switch to access Internet when using Hyper-V guest system? (Some reference if needed:Hyper-V Virtual Switch
Overview )
The network connection seems to be fine, if you mean the webpage can't be displayed through Internet Explorer, please take a look at the article below:
"Internet Explorer cannot display the webpage" error
For more information, please check:
Fixing "Page cannot be displayed"
Best regards
Michael Shao
TechNet Community Support

Can no longer simultaneously stream an mp3 in Safari when using fast user switching option.

After updating to ios 5, I can no longer stream an mp3 in Safari when I use the fast user switching option. For instance, if you are listening to streaming content in a Safari tab and want to reference another app as soon as you switch from the Safari stream pauses.
This was not the case with previous versions of ios. Any ideas on a work around to restore this functionality to keep Safarr streaming content in the background?

User switching problems is the very first thing I noticed with SL. I have a host of other problems with SL but this is one of the most frustrating. The user switching did not work on 10.6 very well either but was wicked fast in 10.5.x
Apple rewrote the Kernel so this type of thing is expected, still the test crew missed this very noticable problem. Hopefully 10.6.2 has a fix.

Hyper-V host 1Gbps NIC negotiated at 100 Mbps when used for Virtual Switch

Hi all,
Hoping someone can shed some light on this one as I’ve been trying to hunt down a solution for a week now.
Setup
HP ProLiant ML350 G6 with HP NC326i PCIe Dual Port Gigabit Server Adapter network adapters
Windows Server 2008 R2 Core with only the Hyper-V role installed
SBS 2011 installed as guest
Port 1 on Dual port NIC configured a physical port or management of Host only
Port 2 on Dual port NIC configured for use as an External Virtual Switch port for use by guests only
The issue is that the physical port connected to the Hyper-V virtual Switch negotiates with the network switch at 100 Mbps full duplex while the management port negotiates at 1 Gbps full duplex. All clients (brand new HP Z210 workstations) also negotiate
with the switch at 1 Gbps.
During file copies and backups the network port connected to the Virtual Switch does not show any errors and transfers data at close to 100 Mbps. File transfers between individual workstations and workstations and server core again show no errors, but transfers
at 1 Gbps.
One observation is that the physical NIC connected to the Virtual Switch does not negotiate with the switch until the Hyper-V service has started (I’m guessing) the virtual switch.
Also, while staging the server the Hyper-V virtual switch created when the server was connected to a 100 Mbps switch not a 1Gbps switch as it is in production.
Has anyone encountered anything similar and if so how did you get the physical NIC to operate at full capabilities? Any assistance would be greatly appreciated.

Hi,
I purchased one gigabyte switch for home used several days ago, I just performed some copy tests between virtual machines and physical machines(not
Hyper-V host machine)in the same LAN, the average copy speed is 350Mb/s.
Best Regards,
Vincent Hu

Getting error when using the "/parameter" switch in command line run

Has anyone experienced this problem before?
My report queries over 100,000 records from a view. When the report is run from the command line every thing works fine.
But when I add a condition using a "parameter", although the report still runs fine from the destop, when launched from the command line it errs.
"Oracle Discoverer Desktop has encountered a problem and needs to close. ..."
"The instruction at "0x0044397c" referenced memory at "0x0000004e". The memory cound not be "read"...."
I'm guessing its a memory issue with my PC. I've tested using a parameter with other reports using fewer records and it doesn't err from the command line.
I can work around the issue by not using a parameter but then I have 20 versions of the same report each with a different condition.
Any suggestions would be appreciated.
Lise McGillis

Hi Michael,
I'm using an DELL Intel Pentium 4 CPU 3.00 GHz with 1 GB of RAM. We use Microsoft Windows XP Prof version 2002.
As for Discoverer we are using 10G, Desktop Client 10.1.2.48.18 - 1047500 KB available memory , 2099744 KB Free disk space.
I'm not sure I have acess to a computer with more RAM but I'm looking into it.
What I'm frustrated by is the fact that the parameter works fine when run directly from the desktop but when passed from the command line it bombs... but only when dealing with mega records.
Lise.

NoClassDefFoundError when using a classpath switch

Hello,
When i try to run some code on a solaris machine i am getting a noclassdeffound when I try to execute my main class
the command im using to execute is
/usr/j2sdk1.4.2_05/bin/java -classpath "/opt/TimesTen/5_0/jdbc/lib/classes14.jar;/usr/j2sdk1.4.2_05;." Mainmy main class is
import java.io.*;
import java.net.*;
import java.sql.*;
public class Main {
        public static void main(String[] args) {
                Server sv = new Server();
                sv.start();
}I don't have access to create a class path so im just trying to set it from the command line, however if i just issue java Main the program runs. This is on Solaris 8

On Solaris the classpath element seperator is a colon, not a semi-colon like it is in Windows.
... -classpath /opt/TimesTen/5_0/jdbc/lib/classes14.jar:. ...
Sigh Too late, as already covered by another poster above.
But this still applies:
... And there should be no need to include /usr/j2sdk1.4.2_05 in the classpath.
Message was edited by:
warnerja

When using Time Machine in Mac Mail, everything works fine but restored files do not appear in MM - On My Mac, and I cannot find them anywhere. Thanks

Time Machine Problem: Mac Mail. Cannot Find Restored Files in Mac Sidebar where they are supposed to go.
I am using Mountain Lion on my MacBook. I have successfully used Time Machine in the past, but I have incurred the following problem that I am requesting help on.
I am attempting to recover Sent and Inbox Mac Mail sent. I go through all the steps properly and locating what I want to recover, and after hitting Restore everything seems to be working and I get a message "Restoring 207 files". The guides say that then I am supposed to find the files in Mac Mail sidebar under ON MY MAC. But they are not there nor anywhere else I have looked. In other words, everything appears to be working fine except I cannot find the restored files.
Thank you for you help.
Jerry

Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an older version of Mail. In that case, you have to use an alternative method.
Triple-click the line below to select it:
~/Library/Mail/V2
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder selected. Inside that folder are subfolders representing your Mail accounts. The names refer to the email addresses you use. Decide which ones you want to restore messages from.
Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then selectRestore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
From the Mail menu bar, select
File ▹ Import Mailboxes...
Import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.

Audio only when using iPad with Safari: can I view live streaming video via Safari?

I only get audio on streaming broadcasts when I click on the AirPlay Icon in the progress bar? Can anyone help me get the video to display as well?

Websites have to have content in compatible format AND also need to allow video streaming - if both conditions are not met then Airplay will often give sound only.
If iPad 2 try turning on full mirroring (Home button twice, swipe all way to right, Airplay and set Mirroring slider to on).
AC

Error 80 when using bluetooth on car radio

error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5

me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out. mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S. im blaming Pioneer not Apple for this
I ended up buying a new deck for my car...gets installed tomorrow.

IPad "misbehaves" when used with a MultiSIM - picks up/rejects phone calls

Hello Cupertino,
iPad 3G misbehaves when used e.g. with a MultiSIM card of T-Mobile Germany.
It is said to pick up phone calls and actively rejects them. Thus the "Main" Mobile Phone (e.g. the iPhone) will ring ONCE then the iPad will pick up and reject the call. (On T-Mobile Network, one cannot disallow phone calls for a specific MultiSIM, all Phones of the same number will ring simultaneously).
This is a really serious and embarassing bug, please fix it with next OS version.
Cheers,
Thomas

No! this is a "bug", because the ipad is connecting via the sim-card in an incorrect way. From day one on Apple always is pressing the fact that the iPad is a "data"-device ONLY and NOT a "phone"-device.
There is no intention of Apple to make the ipad do anything else as "connecting to the internet". That's why there is no textmessage app, no voicemail, no phonestuff on the the ipad. That's perfectly ok! But considering this the iPad misbehaves when connecting to a gprs/umts network because it is connecting showing itself as a PHONE AND DataDevice instead of DATA-ONLY.
THAT IS WRONG, because this automatically triggers the telcom provider to sent voice and messaging connections to this device.
Proof: On a jailbroken iPad it is possible to simply switch the device to the correct CGCLASS="CP" setting. With this setting the iPad only connects as a datadevice (e.g. like a usb-umts-stick) and doesn't answer any incoming non-data-connections.
BUT: I don't want a jailbreak! If want a correct working iPad.
And last but not least: the multi-sim-option (meaning more simcards under the same number) is totaly legitimate and is part of the usagespecs for telecom-networks. It is working perfectly well if (yeah, IF) every device connecting to the network identifies itself correctly with its capabilities.
If a device identifies itself as a phone and it actually isn't, then this device has a serious bug and is not correctly configured to be used in a mixed telcom network. Just because "normaly" everybody uses only one simcard, it is no reason NOT to stick to specs.
This is just sloppy work when porting the iPhone OS to the iPad. Simply forgotten! No big deal, but fix it, because Apple is "killing" a whole generation of german t-mobile users (all iphone contracts older than ~12 months can use their dataplan with free multisimcards from t-mobile on different devices!).
Message was edited by: kinonet

Backup-Spsite giving error when using -usesqlsnapshot

Good morning,
Some of our site collection backups are failing with a system.exception error, but only when using the -usesqlsnapshot switch on the powershell command. They work fine when not using this switch.
We need the switch because the backups often last longer than overnight lock site collections during the business day without the sqlsnapshot being used.
Thanks in advance for any insight into this issue!
Kevin

Hi,
There are three requirements that need to be met in order to allow usage of usesqlsnapshot. These are:
Farm must be running SQL Server 2008 (Enterprise Edition) with Service Pack 1 and Cumulative Update 2 or higher.
To prevent the error
'Operation is not valid due to the current state of the object.' Service Pack 1 must be applied to the farm.
The SQL FILESTREAM provider cannot be used in conjunction with the
-UseSqlSnapshot parameter as the
SQL FILESTREAM provider does not support snapshots.
For more detailed information, refer to the article:
http://www.darrenmarsden.com/post/sharepoint-sites-backup-and-usesqlsnapshot
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/c74f5045-050e-4d2d-a6ba-5b1a9e683ccb/backupspsite-usesqlsnapshot-does-not-work-with-addspshelladmin?forum=sharepointadminBest
Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When using podcast i switch to radio-canada live and it start to stop and restart it and voice control start and stop by it self

Similar Messages

Maybe you are looking for