When using Remote 2.0 on iPad, songs won't appear in alphabetical order
Anybody else getting this? Since upgrading to Remote 2.0 when clicking on the Songs tab I will get Artists in alphabetical order with their songs listed underneath. This is different than the Artists tab which just lists Artists alphabetically without their songs listed. I get this behavior on my iPhone 3G also. I can't get the Songs tab to just list Songs alphabetically. On my iPodtouch I have Remote 1.0 and it lists songs alphabetically like always.
Any ideas would be appreciated.
Cheers
Mrjazz
Message was edited by: mrjazz
Message was edited by: mrjazz
Hi,
I think we are talking about the same issue?:
http://discussions.apple.com/thread.jspa?messageID=12348434�
I contacted the service several times for this issue, but unfortunately nothing happend.
Similar Messages
-
why cant i download all of the itunes songs off my wifes purchased itunes account when using the family sharing? some songs i can and some it wont let me
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Printing to a Printer Connected to TIme Machine when using Remote Desktop
Hi,
I am having trouble printing to a printer connected to our wireless network via Time Capsule when I am on my remote desktop connection. Printing from all other programs work. I downloaded Bonjour on our Windows based server, and it did not detect any printers. When I am connected directly to the printer, I can print when using remote desktop. Any suggestions are much appreciated.
Thanks!
Mac OS X (10.5.4)Airport Extreme/Express do emulate Jetdirect/port 9100 printing, but that isn't what they use for printing from OS X. OS X and the Bonjour/airport software use USB port redirection, a unique and separate method.
If the HP driver supports any protocol over ethernet, it would be appletalk. Does that router server use appletalk? -
How can i turn off all the mails that i recive when use any program form my iPad?
How can i turn off all the mails that i recive when use any program form my iPad?
Everytime i use the my ID recive an e Mail to inform me.
-
RMBP reaches 104C when using remote desktop. Is this normal?
I have a new rMBP that is reaching temps of 104C when using remote desktop or other moderately intensive applications. Is this normal?
No, that's way too hot. It's only a few degrees below automatic thermal shutdown.
-
when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?
Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.
-
Is there a flash when using the camera on the iPad?
Is there a flash when using the camera on the iPad?
Unlike iPhone, there's no LED flash on iPad. But iPad's specs indicate that it does have a backside illumination sensor to increase the amount of light captured and thereby improve low-light performance. Apple say:
"The 5‑megapixel iSight camera features a backside illumination sensor that captures great-looking pictures whether by sunlight or candlelight." (Source) -
Apple TV3 turns off and on when using remote, already reset and restarted.
Apple TV just started acting up yesterday. When using remote, light on Apple TV would turn off and on so it would somewhat work when the light was on and would not when light when off. When light is off and in a menu selection, cursor would just move to the end of the list and stop. Already restored back to factory and reset it. Difficult to program after reset when remote only works part of the time when the light goes on so stuck in out of the box condition. Any help on this? Thanks!
Hello stiktani,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV remote issues:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?
Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Please help! When I tap Purchased on my ipad, it won't open to show me the purchased apps. It says 'Loading' but never does. I use the apps to help my daughter who has an Autism Spectrum Disorder. Thank you in advance
Hi, I was having the same problem on my new Mini. It would load fine on my iP3 and my phone but not my mini. My two daughters both have iPads linked to my iTunes account. They download a bunch of apps and I suspected this had something to do with it.
After a few hours, I found how to hide the purchased apps in iTunes (go to Store, App Store (up the top) then the Apps tab. Hover the mouse until you get an X then click on it. It doesn't delete it from your library, just stops it showing up on your iPad. I did this, launched Purchased on my iPad mini and boom they all came up. I just hid those I don't use/want any more, and some of the older ones my kids have purchased. Cut the number down from nearly 500 to 280 and it loads like a charm now. -
I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Is there someone out there that can help me out? I would appreciate it!
Hi NYYJMM,
Thanks for visiting Apple Support Communities.
You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
How to reset iPod
http://support.apple.com/kb/ht1320
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Best Regards,
Jeremy -
I´m a frequent user of personalized tags on my contacts. When I update to iOS7.0.2, my tags don’t appear on alphabetical order as they were on the other system. I already made a restoration of the system and it didn’t work. Is there any way to fix them?
I´m taking about the "CUSTOM LABELS"
-
When I respond to email the original message won't appear. Why is this?
When I respond to email the original message won't appear. Why is this?
Check Mail/Preferences/Composing/Responding to make sure the box is checked for Quote the text of the original message.
-
Report hangs when using Remote Desktop
I am having trouble with Crystal Reports 11. I was wondering if there is a known issue when using it in conjuction with Remote Desktop.
Here is the scenario.
I am using Remote Desktop to connect to a server.
I am running a report using Crystal Reports 11.
The records have already been retrieved (approx. 800,000 records) and is printing - slowly.
It takes around 75 minutes for the report to print 12 pages.
If the Remote Desktop connection is closed, then re-established, the Crystal Reports pops up a message box stating "Not Supported". The pages of data the were previously printed are now blank. (For example: if it was on page 1 of 9+ it will go back to 1 of 1+ and the page will be blank.)
If I use a VPN to connect to the network, then use the Remote Desktop Connection to connect to the server, the connection will periodically disconnect and the re-establish. This does not occur when not using Crystal Reports.
Is there a problem with using Crystal Reports with Remote Desktop? Is there a better way to run my reports remotely?
Thanks for any input.
RyanYou may be better off posting this in the Crystal Reports Design forum as that team supports issues regarding working with the CR designer:
SAP Crystal Reports
Ludek -
Kinect for windows sensor does not start when using remote WMI
Scenario:
I have written a software (lets call it kinectRecorder.exe) that uses "kinect for windows sensor" to record images. The machine that connects to the kinect sensor has windows 8.1 and kinect v2 installed. The software is able to successfully records
images from kinect sensor when running locally. (meaning if I hit f5 from vs2013, frames are recorded to local disk)
Due to resource constraint and other requirement, I have to remotely kickoff kinectRecorder.exe on the windows 8.1 machine from a windows 7 machine. on the windows 7 machine, I remotely kick off the kinectRecorder.exe using windows WMI infrastructure.
The credential used for windows 8.1 machine and windows 7 machine are the same under same windows domain. the credential used to authenticate in wmi is also the same, I can see the user name running kinectRecorder.exe after kinectrecorder.exe is started
remotely.
Problem:
The result is that kinectRecorder.exe starts ok, but after the kinectsensor.open call, isavailable property changed to false, meaning sensor not detected.
Question:
What's stopping kinect sensor to be detected/opened (i'm not sure what the correct jargon is here)?
I have been search the web, In msdn documentation (known issues), I cannot find the problem being mentioned. I wonder if I'm the only person who has encountered this issue before.
Any pointer is hugely appreciated.Kinect is not supported within the context of a service because of the underlying need for a user session, see
https://social.msdn.microsoft.com/Forums/en-US/72cecf8b-ac64-47e2-b54b-ddbd1dc237c9/calling-kinect-sdk-apis-from-a-windows-service-is-not-possiblesupported?forum=kinectv2sdk
Can determine that the system has at least one logged in user and can you launch the application within that users session? KinectMontior/KinectService must be running for the runtime to get any data from the sensor. If you use Remote
Desktop to log into that user session, you can confirm this works by running any of the samples and they should work without issue(remember to ensure that your audio remoting is left on the server, see troubleshooting guide
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk).
Carmine Sirignano - MSFT
Maybe you are looking for
-
Error While Creating Workflow for Purchase Requisition Rejection
HI Experts, Purchase Requisition No is not Displaying in the Business Workplace Inbox after my Work flow got triggered. In Work flow i am Using the Task 97600004 which i copied from the Standard Task 65400032. This Task i called in the Activity S
-
My iPhone 4 screen went all white and is now flashing what wrong
What's wrong with my phone?!
-
What do I click on to download a document or email?
I am suppose to be downloading software from Dak.com. do not know what to click on to download. The word download does not appear anywhere. I am not computer savvy, trying to learn how to use.
-
Colours desaturate when I copy and paste an image into another file
I'm using Illustrator CS4 with Windows Vista, 4GB RAM. I've created an image using lots of gradients and different shades of colour, and have tried copying it into a new file, but all the colours in the copied image are desaturated. For instance, a b
-
Oracle 8.1.6 My procedure make this statement : INSERT INTO TTO( USERID,ID,ID2,ID3 ) SELECT 3,2,1,0 FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM TTO WHERE ID = 0 AND USERID = 3) When this procedure is executed with MS-Excel (Get external Data) with 2 us