When using side buttons, volumes says sound effects

Not sure what happened here.  Is it a mistake by a 3 year old or a bug issue.  Started about a month ago that when i open apps that have sound the volume goes mute, meaning sound and keyboard and lock too.  Even when i close the app down and open say a video type app, there will be no sound.  I will push the side buttons and the gray box that should say volume says sound effect.  I have already done the reset with holding home and lock buttons, can't remeber how many times.  I have also reset the iPad,  i have synced it too.  Please help

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Similar Messages

  • Sound is not working properly ? The volume button keeps saying sound effects when it's pressed .

    Sound is not working at all now , when you press the volume button it says sound effects but nothing is happening

    Hello Hartnett01,
    Thank you for the details you provided regarding your audio issue you are experiencing on your iPad.  I found a couple of resources that I think might help. 
    First, I recommend following steps in the following tutorial to address an issue like this (you can skip step 2 "Recharge iPad" because it's not related to this issue):
    Frozen or unresponsive iPad
    https://www.apple.com/support/ipad/assistant/ipad/
    If the issue persists, I recommend reviewing this article next (the title of the article refers to an iPhone, but the steps still apply to an iPad):
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Ipad volume button only says sound effects

    Not sure what happened but my volume button does not operate now on my ipad 2. When I unlock it and try it, it says sound effect.  I have tried all the common remedies posted to no help.  Only sound I can get is from the headphones.  Please help me.

    Nevermind about the help.  I spoke to a friend and he suggested taking Q-Tip, removing part of the cotton, put a little rubbing alcohol on it, then insert it into the headphone jack.  Clean it several times.  Then also do the same to the charging port.  Not sure which fixed it but it works properly now. 

  • When using back button keeps saying document expired during web search

    I found someone else who had this problem on here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=888757
    The solution is to "Reset Firefox" but the issue I'm having with this is that after about a week or two, it returns to the previous state. My client is upset that we don't have a permanent fix for this.

    Hello Personalglitch
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    You also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    right-click and choose View Page Info > Security > "View Cookies"
    (menu bar) Tools > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
    Good luck!

  • Volume button says sound effects, no sound.

    I Can not get the sound to come through on my ipad. It works with head phones. It was working a few days ago. My volume buttons say sound effects. It used to say volume?

    Hello Skeetercove,
    Thanks for using Apple Support Communities.
    Please follow the steps below to troubleshoot the issue of having no audio output from your iPad's speakers.  Please note that even though the steps state it's for iPhone, the same applies to your iPad.
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Take care,
    Alex H.

  • My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • IPad 3 Volume Control says Sound Effects and won't adjust

    Regardless of the mute button/orientation lock whenever I push up or down on the volume control buttons on the side of the iPad, the Volume indicator that lights up in the center of the screen says "Sound Effects" and there are no bars below it to indicate the actual volume, and it will not change.  If I double press the home button, and swipe right to the dimmer/volume/play controls, the volume bar doesn't even show up in its location there.  I'm thinking that the kids changed something in one of their games. And turning it off, or even doing the hard reset of pushing the home and off button simultaneously doesn't clear the problem out.

    Greetings!
    I just now followed the advice above, and solved my problem by using a different charging cable.
    Must be lucky that the old charging cable is "dorked", and not the internals of the iPad!
    The indication of a bad cable, I guess, is that the sound controls fade out after a few seconds with it connected, but they do not do so with a good cable.
    Thank you for the shortcut to happiness, easytiger!
    BTW, some folks also say that the problem may be related to using a non-Apple charger or cable; my "bad" cable is non-Apple; the good one is the original (albeit too short) cable that arrived with the iPad.

  • There is no sound on my iPhone 3GS when using the iPod but the sound

    There is no sound on my iPhoen 3GS when using the iPod.   The sound works in other apps though.

    This article refers to iTunes 10 but may help you >  iTunes 10 for Mac: Transfer files between your computer and mobile apps

  • HT4623 After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly tur.n on ring mode. So please help me to resolve this issue.

    After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly turn on back to ringing mode. So please help me to resolve this issue.

    No one facing this issue in 3GS? please help me.

  • When turning up or down volume it's says sound effect

    I have no sound and the side volume when u push up or down it says above the sound bar (sound effect). Help me get sound please???????

    System Preferences > Mission Control > uncheck "Group windows by application"

  • Script for Button 3 or using side buttons on Mighty Mouse for Button 3

    Looks like the preferences for Mighty Mouse only allow the side "squeeze" buttons to be used for Button 4. I don't want to use the scroll ball for Button 3 because it keeps zooming when i do. Does anyone know how to write a script to configure the side buttons to be Button 3?

    I think I'm having a similar problem. Lately, my side buttons have been activating seemingly on their own. I hear multiple clicking sounds. I know I can turn off the button, but I use USB Overdrive to activate page back in browsers and the Finder, so I can be surfing and be brought back several pages at once. Very irritating. It doesn't seem to be consistent either. I bought my latest iMac in June, so I the warranty should be in place, but I'm an hour and half from the nearest Apple store, making it somewhat inconvenient to have the mouse looked at.
    Heh, right when I was about to post this message, it went back several pages.

  • Volume change sound effect won't stop

    So I changed my preferences and unticked the "Play feedback when volume is changed" option. Basically all is good for a while then a week or two later I'll realise the sound effect is back when I change the volume. But the option remains unticked in preferences.
    Anyone else having this problem?

    Simple, the device even if off can pick up signal noise from any other device or items. Stereo speakers have in the past gave off a whirl sound from radio stations, police and cb radios, high frequency pick up is not unheard of. There are cases where radio receivers have picked up cross talk while off.
    With computers broadcasting on the 2.4 and 5.0 frequency many times microvave ovens, other electrical items can cause the sound the original poster complains about. (Chirping) Cell phones are just radio transmitting and receiving devices.
    You don't need a 500 foot antenna to pick up sounds. Even if the phone is off it has an internal antenna.
    interference is quite possible, and frankly there are not many people posting about radio chirping to believe its nothing but interference .

  • Why does I pad volume show sound effects not volume

    My I pad used to show volume control now it shows sound effects.  Also keyboard clicks not working

    All these effects are part of the loops in the iLife Sound effects loop package, that was a part of the application bundle iLIfe '11 (iPhoto. iMovie, GarageBand '11).  These loops are neither installed by GarageBand 10.0 or GarageBand '11, nor MacOs X, you need an iLife '11 installer disk to get these loops.
    And GarageBand 10 also does not have the Sound Effects instruments any longer, that let you drag samples onto keys. It is one of the sorely missed features, that have been discontinued in the new version GarageBand 10. even if you install the previous version, GarageBAnd '11, to add the Sound effects instrument to GarageBand 10. it will not work properly, because GarageBand 10 will not save the custom instrument with the samples. You will have to complete your song in one session, without quitting GarageBand.
    You may want to send feedback to the Apple Developers about these missing features with a feature request:   Apple - GarageBand Mac- Feedback

  • Safari 5.1 reloads page when using back button or gesture

    Safari has the strange behavior of reloading pages "navigated to" using the back button or gesture.  Most other browsers I've worked with pull from cache when using the back button.  I don't think this behavior is compliant with standards - defacto as they may be. 
    An example of why this is wrong is the navigation of this forum.  I just loaded Lion and need to use the forum for support.  When navigating back from a particular post to the list of posts the page will reload.  Needless to say several hundred posts have been entered since last looking at the list and I subsequently lose the context of what I read last.  The list of posts from cache which I orginally looked at should be returned - not the latest updated one.  Let me choose when to refresh a page from the cache.
    I downloaded Google Chrome to compare behaviors.  Chrome does not reload pages navigated to using the back button - it pulls the pages from cache.
    I've looked at the configuration of Safari and see no options to configure this behavior. 

    Switch from one finger swipe to two finger swipe
    ok, since i do not have a trackpad, i used my magic mouse. I changed my swipe between pages from one finger to two and my pages no longer re-loaded. Changing that option back to one finger swipe then set my pages to re-load   our setting are slightly differnt, but were looking for the same outcome.   Lood for a "Swipe between pages option. Then look for a drop down triangle. now change your swipe left or right with two fingers to one.   this should re-load your pages now ;-)

Maybe you are looking for

  • How to add a new dimension in ASO cube without losing all data

    Hi, I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of

  • Can we restrict storage type while creating a order in COR1?

    Hi When we create a process order in COR1 then we enter material list... in that we specify plant stor loc of the material.. my req is if the material type of material is XXX then if its stor loc is ZZZ then it shud look for only 3 storage types ie A

  • Discoverer Export to Excel but Using Open Office

    Hi, I used to use MS Excel as my spreadsheet but I have migrated to using Open Office's Calc. All works fine except.... Previously, exporting my Discoverer work sheet results to Excel allowed MS Excel to open up the exported spreadsheet with all form

  • Problem Recording FMX1 Transaction for Batch Input. Plz Help

    Hi Everyone!!! I'm using the Transaction SHDB to create a new recording over the FMX1 Transaction for a Batch Input. The strange thing is that when i'm about to save the recording i get the following error: "A runtime error: SAPSQL_ARRAY_INSERT_DUPRE

  • Mac mini not keeping connection with Cisco wireless access point

    I am trying to get my wife's Mac Mini to keep it's connection with the wireless network at her school. They are using a Cisco access point (not sure of the model) which works fine with my G4 Powerbook and the numerous Macbooks being used there, but f