When using stream clip to covert m2t files  its says mpeg2 playback component is not installed is it included fcpx

when using stream clip to covert m2t files  its says mpeg2 playback component is not installed is it included fcpx

You need to purchase for MPEG Streamclip's full functionality.
Russ

Similar Messages

  • When using stream clip what is the best format to convert to for editing...

    On FCE? Many thanks!

    This is what you need to use if you want to edit video in FCE without having to constantly render.
    Within the Apple Intermediate Codec selection there are parameters you can set (frame size, frame rate and a few other things) ... but these do not normally need to be tweaked because in most cases MPEG Streamclip is smart enough to detect the nature of your source video file(s) and select the appropriate settings for you.
    The point is, if you're not capturing video directly from a DV, HDV or AVCHD camcorder, then you need to convert your video as above if you want to edit it in FCE with minimum issues.

  • When using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name.

    Our company has recently upgraded form Acrobat Professional 8 to Acrobat professional XI. We also use the Quite Imposing Plus plug-in in both versions. Now when using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name to the printer unless the imposed document is first saved. This was not the case in Acrobat Professional 8. I have attached a screen shots that shows an example.
    Is there any reason why this is happening and how can we stop it.

    Thank you for your advice although I think you may be incorrect as the naming of the documents made with Quite Imposing is correct in Acrobat 8.
    After reading the comment below it would seem something has changed from version nine onwards.
    Going forward we plan on changing the way we save and send our imposed documents to print but thank you for your time.

  • I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular

    I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer.  This happens with mp3 and mp4 and just wav files.  Some audio are accepted, most are not.  I get that codec is not installed error message, too.

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

  • When using safari, media such as mp4, as a web mail attachment (yahoo) is not opening in QuickTime .  File association is broken. Does any1 have a solution?

    When using safari, media such as mp4, as a web mail attachment (yahoo) is not opening in QuickTime .  File association is broken.
    If I use the mail application the attachment opens and I see the QuickTime logo on the attachment.
    When using the web mail yahoo the attachment, an mp4 audio, opens a black page with a crossed triangle icon in the middle of the page.
    Any solution ?
    Thanks .

    There's two ways you can deploy your aspx (layout) files. One is deploy in _Layouts folder (which basically copy the file in (c:\program files\common files\microsoft shared\web server extensions\15\template\layouts). To copy file in that place, you don't
    need module, just use SharePoint mapped folder.
    Another way is to upload the layout folder in SharePoint library. But _catalogs is not the right place to upload your file (_catalogs doesn't have any subfolder named 'layouts'). You can upload your file in 'Pages' library or 'site pages' library in the
    current web.
    I'm not quite sure though (sorry I didn't get what the problem is but just guessed you are trying to get your aspx page in SharePoint designer, not sure why) why you need to upload the file in pages/site pages library instead of '_layouts' folder. 
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • When using Pages to create an EPUB file, how would I force a page brake?

    when using Pages to create an EPUB file, how would I force a page brake?

    Sory Peter but you don't seem to understand.
    If you pick up an e-book by random on the iBook Store, you will see that professional e-books ALWAYS start their chapters at the top of a new page, whatever the reader, the color of the page or the size of the text are.
    I know how to add a new chapter with the use of the appropriate style in Pages but I want to be able to divide SECTIONS as well.
    What I want to to do is to force a page break in between two paragraphs and apparently, this option is not possible with Pages.
    Rémy.

  • HT4889 when using migration does it copy the files to the new computer or transfer (leaving the files only on the new computer)?

    when using migration does it copy the files to the new computer or transfer them (leaving the files only on the new computer)?

    It leaves them on the old computer. Nothing will be changed on it.

  • I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a

    I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
    Also I have noticed opened windows that I have not opened.
    I have verified the sharing folder and also the remote access but it not let me turn it off.
    Also I have add a password to my computer and even using the same one it looks like is not working.
    The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
    The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
    In system preferences in the sharing folder is showing everyone and staff.
    My computer is private I do not own a company and I do not have a network set up in my house.
    I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
    I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
    Any suggestions in how to fix this issue?
    I really appreciate.

    With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.

  • I just recently upgraded my itouch from 4.1 to ios5, and updated to itunes 10.5. when isynced my music files,ebooks and other apps, all is working except when im trying to sync my video files. it says, canot be synced as cannot be played on this ipod.help

    i just recently upgraded my itouch from 4.1 to ios 5, and updated to itunes 10.5. but when i synced my music files,ebooks and other apps, all is working except when im trying to sync my video files. it says, canot be synced as cannot be played on this ipod. but those are the same files that i have when i was using the old 4.1 version and its syncing just fine.. the itunes advanced tab "create iphone or ipod version" is not working either so i cant convert it to be xferred and synced. what can i do to have my video files synced?

    i had the same problem but i just got a new video converter and made it convert videos to ipod/iphone format and then put them into itunes. i would suggest GOM encoder as the encoder can convert them and then once they're finished converting, put them automatically into your itunes for you. from there you can just sync them to your ipod.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • HT1495 how to delete apps when using one account for iphone 4s and ipod4, can delete from phone but not ipod

    How do we delete apps from ipod 4 when using same account as iphone 4s, we can delete from the phone but not the ipod, and when i get an app on my phone it automatically comes up on the ipod and visa versa, now ipod is full,

    Read the article from which the thread was posted, it clearly defines how to use multiple iDevices on a single computer.
    Sharing an Apple ID is not an issue.

  • I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

    I went to icoke.ca and entered my pin to get a free song, but when I went to itunes to redeem it, its says that my code has already been used. Help!

    It wont even accept my icoke pins! when I enter them (and there are two on the inside of the cap) it says its an invalid pin..  Other places online says this offer expired March 31, but on the bottle cap it says 12/31/2011  so I dont understand,.  Why do you offer a free itune when one cant access it?

  • What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    Well, I installed the latest iTunes this AM, works perfectly.  Although for some reason it did lock up after playing a song today.
    Horror stories?  That's a bit overly dramatic.
    No, it isn't.
    The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
    A simple search was conducted, no one seemed to have an answer.  Do you always adopt such a haughty attitude?  Or was I just lucky.

  • When I double click a CS3 Illustrator file in finder, it opens in preview, not in Illustrator CS4.

    When I double click a CS3 Illustrator file in finder, it opens in preview, not in Illustrator CS4.
    Is anyone having this same issue?
    Is there a quick and easy method to convert to CS4.
    I have 4000 ads, 3,000 are from freelancers that are CS3 or CS2.
    Jim Etheridge

    Select a couple of .ai files and Get Info on the files. Go to the Open with line and set it to Adobe Illustrator. When it ask if you want it to do the same for this file type answer yes. The OS is probably seeing the file as a PDF and Preview by default is set to open PDFs.

  • Where is my Mac App. I purchased a MacBook Pro about two years ago while in Okinawa.  I recently moved to St Louis.  When using the "find my Mac" app, it still says my Mac is located in Okinawa.  How do I get it to recognize that it is now in St. Louis?

    I purchased my MacBook Pro 2 years ago in Okinawa.  I recently moved to St Louis.  When using the "find my Mac" App, it still says my Mac is in Okinawa.  How do I get it to accurately show my Mac is now in St Louis?

    Open System Preferences using the menu item " > System Preferences" then select the "Security & Privacy" pane.  selec the "Location Services" on the left and enable using the checkbox:
    Just noticed you details show you are running OS X 10.7.5 so I am not sure this is exactly correct.

Maybe you are looking for