When using Teststand, how do I prevent the LABView splash screen from appearing?

It comes up even if I have the "Don't show this screen" checked !

I'm excited to see TestStand is a celbrity product.
Typically when you run a sequence in TestStand, LabVIEW is launched by TestStand when the sequence contains steps that use the LV adapter. In this case LV is launched through its ActiveX interface and the LV splash screen is suppressed. This is in contrast to launching LabVIEW manually in which case the LV splash screen will be displayed.
In your case I'm not sure how LV is being launched. You might want to shut down LV and then run your sequence to see if the splash screen is then suppressed.
You may also want to read NI Knowledgebase article 28MEPUXL, "Why Does the LabVIEW Startup Screen Appear When Using the Dialog Box Function from Within My VI?". In this case LV has been opened manually and not be Test
Stand, such that the splash screen is not suppressed.

Similar Messages

  • How can I prevent the S5's screen from coming on when charging completes?

    I got my S5 today and it seems to have a "feature" that will be very damaging to the OLED display.  When it's done charging, the screen comes on and stays on.  I've been going through all the settings I can find and don't see anything that will prevent this.  Since static images burn into OLED screens, this is the last thing I want.  It's done the same thing several times.  My old phone (Galaxy Nexus) didn't do this.  When the Nexus finished charging, it did so with no fanfare.  The screen stayed off.
    When the S5 is locked and the screen is off, there's no reason for the screen to come on for anything short of a phone call.  It certainly shouldn't come on and stay on just because the battery finished charging.  And, any time the display does come on without user input, it should turn off again automatically if it's idle for the length of the screen timeout.
    I've got "Smart stay" turned off and "Screen timeout" set to 1 minute but, after it self-activates, it stays on indefinitely.  I've let it go for 20 minutes and the screen is still on.  How can I fix this?  If I can't get this behavior to stop, it's going back to the store.  I'm not paying $600 plus tax to have my lock screen burned onto my phone because I charge it at night.

    Okay I've tried safe mode.  Let it run down to 98%, plugged it in, locked the screen, and waited.  A few minutes later, the screen came on showing the 100% icon at the top right, full battery icon just to the left of the time, 100% text to the left of that.
    I'm not going to do a hard reset until I have confirmation that this is not normal behavior for the phone because that's going to take hours of my time and gigabytes of data transfer to get all of my media and apps back on the phone and configured.
    After all my griping, I do have to give credit where it's due.  This phone is much more efficient than my Galaxy Nexus.  I left the S5 running in WiFi hotspot mode while on battery last night.  It still had over 50% left on the battery.  The Galaxy Nexus would be stone dead after about 4 hours.  I can live with that if I have to but I'd really rather be able to leave it on the charger at night.

  • How do i stop the rainbow coloured circle from appearing especially when using IPhoto?

    how do i stop the rainbow coloured circle from appearing especially when using IPhoto?

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    lunagirl wrote:
    The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61.  Add/Remove programs has only these pre-installed apps:
    Microsoft Office 2003 Web Components
    Microsoft Office 2007 Primary Interop Assemblies
    Microsoft Office Small Business Connectivity Components
    MS SQL Server 2005
    MS SQL Server Native Client
    MS SQL Server Setup Support Files
    MS SQL Server VSS Writer
    Is the activation assistant one of them?
    No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
    Rgds,
    Ahti

  • Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address

    Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address when I use a "send this" link on a webpage/news article. The email window opens and automatically inserts my old Hotmail address instead of the Yahoo address I've used for a long time. (The drop-down won't let me change it or delete it.) Thanks.

    Do you get a drop down list with suggestions if you clear that "from" field and click elsewhere on that page to move the focus off that field and then double-click again in that field or start typing the first letters of that unwanted email address?
    Use these steps to remove saved (form) data from a drop down list:
    #Click the (empty) input field on the web page to open the drop down list
    #Highlight an entry in the drop down list
    #Press the Delete key (on Mac: Shift+Delete) to remove it.
    *Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/
    *Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  • How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    The three beeps are an indication of a hardware problem. Power On Self-Test Beep Definition - Part 2 - Apple Support

  • How can I stop the iWeb welcome movie from appearing

    How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
    Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
    Who knows these tricks?

    iPhoto seems to be viewing the iPod as a camera.  Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
    OT

  • How do i disable the startup splash screen in elements 9

    How do i disable the startup splash screen in elements 9

    Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
    On Windows, Right click anywhere on the desktop and select New >> Shortcut
    Then click the browse button and navigate to:
    "C:\Program Files\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe"
    Then click Next; then click Finish
    Then make a direct shortcut for the Editor in a similar manner.
    On Windows, Right click anywhere on the desktop and select New >> Shortcut
    Then click the browse button and navigate to:
    "C:\Program Files\Adobe\Photoshop Elements 9\PhotoshopElementsEditor.exe"
    Then click Next; then click Finish
    N.B. on 64 bit systems navigate to Program Files (x86)

  • Is there a way when using iTunes Visualiser, I can put the lyrics on screen?

    Is there a way when using iTunes Visualizer, I can put the lyrics of the song i am playing on screen? It would be really cool.

    I got it to work now by writing code to convert it back to an array. Thanks

  • How do I prevent the Lion boot partition from being reformatted when using boot camp?

    Under Windows 7, Computer Mgt, I shrink the C drive to create another drive.  When I right click on the unused drive to format it, 200MB Lion boot is formatted and assigned a drive letter F.  But I did not tell Windows 7 Computer Management to do that.  I clicked on the unused 170GB space to create it as F, I did not click on the 200MB Lion boot partition at the front of the list.
    Now I have to take the computer back to the Apple store to reinstall Lion for me.
    I tried this twice and it happened twice.  So now I need to go back to the Apple store a second time for help on the same problem.
    Would the 200MB Lion boot disk at the front be safe from reformatting if I first made it drive letter F, and then made the new drive letter H at the right side of the drive list in Computer Management?  Also, there is an unlettered drive between the Lion drive E and the Windows 7 drive C.  Should I make that G prior to formatting drive H?
    By the way, I did this on another MacBook pro that was using Snow Leopard, following the same procedure, and had no problems.  So could a different version of Boot Camp be the issue?

    I just found an older question similar to this one that you also replied to. It was from 2012 and never solved. The only things I am using in my set up is a male quarter inch cable from my guitar to my interface, a USB cable from my interface to my computer, and headphones from my interface to my ears of course. Just like in the other question I found I have everything in the Audio MIDI Setup of the computer set to use the interface as input and output and I also have everything in garage band setup to use the interface as audio input and output. Any new track is recording the metronome and any old track that is being played in the headphones. No external speakers are being used for monitoring and no microphones are being used.

  • How do I prevent the Airport Extreme router from dropping with DSL when a call comes in?

    I just installed a new Aiport Extreme 802.11n router. I am using DSL and it works great until someone calls me. When the phone rings and my answering machine answers the call the router drops and start flashing amber.My old router did not have this problem. Is there an option I can set that will prevent the router from dropping when someone calls me?

    The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.

  • When using messaging, how can i turn the whoosing noise as a message is sent or recieved, very annoying

    when using the iphone 4s, in messaging, there is a whossing noise as messages are sent or recieved, have tried to turn off noises in messaging settings but it is still there, the only way i have found is to turn the sound down. i am sure that there must be a way to turn this noise off

    Set iPhone Settings > Sounds > Sent Mail > to none.

  • When using faces, how do I see the whole photo?

    Frequently when reviewing unnamed faces, I would like to see the whole photo to see the context in which the face appears. Is there a way to do it?

    Are you in Faces View?  There should be buttons on the bottom edge of the Browser to switch from the Face to the whole photo.
    See this page in the User Manual:
    As the number of confirmed images of a person grows, it can be difficult to identify a person’s face in a small thumbnail image. To make it easier to identify a person’s face in an image, you can either make the thumbnail images larger or switch from showing whole images to showing only faces.
    To make the thumbnail images larger 
    In the Faces browser, drag the Thumbnail Resize slider to the right.
    To show faces only
    In the Faces browser, click the Faces button.
    Each thumbnail image in the Faces browser is cropped to show only the person’s face.
    To show whole images
    In the Faces browser, click the Photos button.
    The thumbnail images in the Faces browser return to displaying whole images.

  • How can I prevent the settings on iMessage from changing each time I sync the devices with iTunes on our iMac?

    Each time I sync an apple device (iPad, iPad mini, iPhone) with iTunes on our iMac the settings on iMessage and phone settings change. We use the same Apple ID and have different e-mail addresses and phone numbers; however, each time a device is sync'd on iTunes on our iMac, the iMessage settings and phone settings are changed so that we all each get each other's text messages and phone calls. After the device is sync'd/charged, I have to go into each device (all of them somehow update when only one is sync'ing) and re-set the settings to what we want. How can I prevent settings from being changed each time?

    Okay I've tried safe mode.  Let it run down to 98%, plugged it in, locked the screen, and waited.  A few minutes later, the screen came on showing the 100% icon at the top right, full battery icon just to the left of the time, 100% text to the left of that.
    I'm not going to do a hard reset until I have confirmation that this is not normal behavior for the phone because that's going to take hours of my time and gigabytes of data transfer to get all of my media and apps back on the phone and configured.
    After all my griping, I do have to give credit where it's due.  This phone is much more efficient than my Galaxy Nexus.  I left the S5 running in WiFi hotspot mode while on battery last night.  It still had over 50% left on the battery.  The Galaxy Nexus would be stone dead after about 4 hours.  I can live with that if I have to but I'd really rather be able to leave it on the charger at night.

  • How can I prevent the MediaTracker waitForID method from blocking?

    Hi everyone:
    I am writing an application that deals with various image file formats with the help of the JIMI package (available at http://java.sun.com/products/jimi/). Everything works fine except for the Targa format. When I generate an Image object as follows (url is a valid URL object):
    Image image = Jimi.getImage(url);
    ImageIcon icon = new ImageIcon(image);the program execution blocks at the second line above. I searched the ImageIcon source code for some clues, which led me to the following ImageIcon method (tracker is a MediaTracker object, a static property of ImageIcon):
    (01) protected void loadImage(Image image) {
    (02)   synchronized(tracker) {
    (03)     tracker.addImage(image, 0);
    (04)     try {
    (05)       tracker.waitForID(0, 0);
    (06)     } catch (InterruptedException e) {
    (07)       System.out.println("INTERRUPTED while loading Image");
    (08)     }
    (09)     loadStatus = tracker.statusID(0, false);
    (10)     tracker.removeImage(image, 0);
    (11)
    (12)     width = image.getWidth(imageObserver);
    (13)     height = image.getHeight(imageObserver);
    (14)   }
    (15) }The program blocks at line (05) above. I peeked into the MediaTracker class source code, which brought me to determine that the image loading process never finishes. The symptoms are as follows:
    (1) When I perform a c.checkImage(image, null) where c is some Component, I always get a result of 7, which translates to the following combination of ImageObserver constants:
    WIDTH | HEIGHT | PROPERTIESAs matter of fact, the dimensions are indeed determined correctly. However, when the loading process terminates, the checkImage result includes ALLBITS or FRAMEBITS in case of success, ABORT or ERROR in case of failure. None of these bits is ever turned on whenever I try to load a Targa image.
    (2) When I get to the MediaTracker source code, I see that when none of the four bytes above is set, the internal MediaTracker status has the MediaTracker.LOADING bit turned on (nothing abnormal here). And the waitForID method terminates precisely only when this bit is turned off!
    Logically, if the loading process fails for some reason, I should expect to get an error response so that I can go further in code execution. However, since the loading process never terminates, everything stays blocked at the waitForID method invocation.
    Is there an efficient way to detect such a hidden loading error without letting my program go into the waitForID endless loop? In other words, going back to the first two lines of code of this message, how could I detect that an Image loading process will not terminate before calling the ImageIcon constructor?
    Thanks in advance for any useful help...
    Jean-Fran�ois Morin

    Hi:
    I tried precisely your suggestion before posting my message to the forum yesterday. I just forgot to mention it... Maybe I was afraid of increasing my message length more and more...
    I already know that this solution prevents the MediaTracker from blocking. However...
    (1) If they reach a troublesome image (like a Targa), the users of my application might not be pleased by its freezing for 10 seconds. Actually, this image loading module is part of an architecture for database applications from which my development team and I produce applications for various customers. Images are used, in particular, in Oracle BLOB support.
    (2) If I use a smaller timeout delay, I have no guarantee that any image, whatever its length, will load properly (Targa excluded, of course). According to tests I performed yesterday, I am virtually sure that the 10-second delay will be busted very easily by pictures larger than 1 Mb. I cannot overlook this potential problem: an Oracle BLOB can contain up to 2 terabytes of data!
    On the other side, I don't want to focus too much the attention on the JIMI Targa import filter because I know that a revised version of the JIMI and JAI packages will be part of JDK 1.4. This is why I am trying to figure out what is happening in the MediaTracker and Toolkit classes, which are much more fundamental than the Jimi ones...
    Thanks anyway...
    Best regards,
    Jean-Fran�ois Morin

Maybe you are looking for