When using the built-in peak

detect.vi in Labview, if I have a 1-D array of elements that I am passing into this peak detect vi, how do I kind of book mark the peak values? For example, I only want to use the data from my 1D array that is between two peaks. How do I get this subarray?I am graphing my 1D array, and for my assignment, I wish to calculate the mean value of the array between two peaks. Therefore, how can I detect where the peaks are and then go back to my 1D array and locate the subsection between two peaks?

detect.vi in Labview, if I have a 1-D array of elements that I am passing into this peak detect vi, how do I kind of book mark the peak values? For example, I only want to use the data from my 1D array that is between two peaks. How do I get this subarray?Peak Detector.vi seems to pass out the indices of detected peaks and valleys - I would think you could use these as input to Get Array Subset.
cheers,
- kevin

Similar Messages

When using the built in web server, is there a way to specify a different

When using the built in web server, is there a way to specify a different error handler when you try to access a NON .CFM file? Right now I get the standard:
java.io.FileNotFoundException: filename.ext
Is there any setting to override this and direct the message to your own .cfm template? The missing template handler in the CF Admin work only for .cfm files.
Thx

The in-built web server for ColdFusion 8 is JRun. I am on ColdFusion 10, however, and so cannot offer hands-on advice. (CF10 replaced JRun with Tomcat.)
My guess is that you have to modify the file {CF_ROOT}/WEB-INF/web.xml. Don't forget to create a back-up first!
You may then proceed as follows.
1) In the ColdFusion root (CF_ROOT), create the file myCustomFileNotFound.cfm. Give it some content, like
My custom File Not Found page. Current time: <cfoutput>#now()#</cfoutput>
2) Open the file {CF_ROOT}/WEB-INF/web.xml in a text editor. Add the following error-handling specification just before the end tag </web-app>:
<error-page>
<error-code>404</error-code>
<location>/myCustomFileNotFound.cfm</location>
</error-page>
Save the file web.xml.
3) Restart ColdFusion. Test by browsing to a URL requesting filename.ext

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Is it possible to use the built-in speakers when headphone connected?

I have a mini amp and speakers connected via the headphone jack on my late 2009 21.5" iMac.
First, is this the proper way to make this connection?
If I want to switch to use the built-in speakers, I can do so by unplugging the external amp. However, it seems that there should be a way to do this via software. But, I can't find it. Is it possible? If so, how?
I don't always want to make use of the external amp, I want to use it for music and videos, but not otherwise. And, I don't want to have to unplug it when it's not in use.
Thanks.

System prefs> sound> output.
select your internal speakers in there.
No need to unplug your mini amp.
This actually works on your Mac? I doubt it. This does not work on either the Early '06 iMac, nor the Early '09 Mac mini in my house. When anything analog is plugged into the audio-out port, the name of the device in Sys Prefs/Sound/Output simply changes from Internal Speakers to Headphones, there is no option for one or the other.
This has been asked over and over here, and I know of no way to do what the OP has asked.
Dah•veed

Msiexec /qn fails when its not run using the built-in local administrator account

Hello all,
I am working on a project where I am trying to automate the deployment of VMs through a self-service portal.
Among other tasks such as clone VM, sysprep it, assign an IP, create AD computer object, join VM to domain and so on..., i need to install a few applications using msiexec, which is driving me crazy...
For this purpose, I am using a local user account part of the administrators group.
Please note, UAC is disabled on all the OS.
Basically, the msi installation works as expected on Windows 7 machines, however on Windows 8/2012, it fails due to lack of permissions. The curious thing is that if I use the built-in\administrator account instead for the deployment on those systems, the
application is installed correctly.
I have tested some things such as: DisableMSI (http://msdn.microsoft.com/en-us/library/aa368304%28v=vs.85%29.aspx), but although it progresses a bit further, it keeps failing.
Does anyone know what I can do to allow an user part of the administrators local group to be able to install using msiexec /qn?
Thanks in advance.

Hi,
Does it work if you use the account in local admin, and run the commands prompt as administrator to install the msi file? Please know that Only the built in administrator account has admin privilege by default. On other admin accounts you need
to run with elevated privilege (ie runas).
I would like to know if you use SCCM to perform your deployment with task sequence.
As I known, even if you disable UAC, the following policy is still enabled to detect application installation.
Computer configuration\Windows settings\Security Settings\Local
Policies\Security Options -> User Account Control: Detect application installations and prompt for elevation policy
Please disable this policy to see if your issue can be fixed.
Kate Li
TechNet Community Support

How do I use the built-in camera or webcam?

I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it) and the help menu comes up with nothing at all when I search for web cam, webcam or isight.
Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam?
Thank you

VortexBoy wrote: ... I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it)...
There should have been a seventy page booklet in the box with your new iMac. If yours is the latest version, clicking here will download it if you cannot find the physical copy. If yours is an older iMac model, you can search for the correct manual from the iNtel iMac Support Page > "Manuals" link.
After that, Mac 101 is a great web-based information source. If you don't need general help, take a look here for specifics about each application of interest.
VortexBoy wrote: ... and the help menu comes up with nothing at all when I search for web cam, webcam or isight....
If your posted info is correct that you are running Mac OS X (10.7.3), you should be able to get started by using your Mac's Finder > Help menu command. Searching for "camera" (without quotation marks) on my 10.7.3 Mac returns Mac's Help article entitled "Use your Mac’s built-in camera." This is the web version of the same help.
Other apps, like QuickTime Player (the Lion QT 10.x version), and iMovie (part of iLife that came with your Mac) can also use your iMac's camera.
iMovie Help or this web page version of the same help will explain how to "Record video directly into iMovie".
Use QTX Player's File > New Movie Recording menu command to record video with it. You can configure size and quality of the recorded material by using QTX's preferences as shown in this image:
VortexBoy wrote: ... Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam? ...
Different apps do not all work the same. For function-specific help, search Help in separate camera applications; i.e., after you launch Photo Booth, iChat, QTX, iChat, etc., use the individual app's Help menu command to search for more info on the camera or what you want to do.
This article offers great basic tips about how to position, light, and use built-in cameras. Although its subject shows it was written for iMacs, it is equally applicable to other reader's inbuilt Apple cameras, too.
For more specialized functions than those offered by the camera software already included with your Mac, you can search the Mac App Store for other apps that can use your camera.
For webcam help with iChat, use Apple's iChat Support page if you need more help that that provided in the dialog boxes and iChat > Help on your Mac.
To use your camera with FaceTime, search your Mac's FaceTime > Help or these web versions of the same Help topics that should be available on your Mac.
Skype or other third party webcam apps will offer their own Help menus of varying quality. In additon to these app Help services, some apps offer comprehensive Support services via their web page. If you decide to add Skype to your Mac, you can click here to review the excellent Skype Support pages.
If you need to start a new topic for specific questions after you get started, give as much detail about what you want to do and what you may have already tried unsuccessfully. We will offer specific suggestions based on the details you provide.
Enjoy your new Mac!
EZ Jim
Message was edited by: EZ Jim
Mac OSX 10.7.3

How do I use the built-in microphone on my iMac while using Windows XP?

My iMac has a built-in microphone. My computer is set up with a partition to run either mac or windows. I would like to use the built-in microphone feature when I am using Windows XP. Is there any way that I can do this?

Hi and welcome to Discussions,
assuming you have installed the neccessary BootCamp Drivers from the OSX Leopard DVD the internal mic is useable with any kind of recording software.
Windows itself has a rather rudimentary Audiorecorder program built-in.
For a more sophisticated recording program have a look at Audacity http://audacity.sourceforge.net/
Regards
Stefan

How can i use the built-in microphone at the same time as using my earphones? (they have an external mic attached)

I am recording stuff on garageband and i need to hear other tracks as I'm playing, but I have to play them through external earphones so that the they don't overlap onto the one I'm creating.
The wire for my earphones has an external microphone attached to it, however, I have no desire to use this microphone as it is ridiculously sensitive and picks up even the slightest vibrations when the wires rub against my cheek or my t-shirt.
Therefore, I need to use the built-in microphone when recording. Except that, whenever I plug in the earphones to the iMac, garageband automatically switches to the external microphone. I went in to the Garageband preferences, and saw that it was set up for recording through the built-in mic, which is strange because input is clearly coming from the external.
So, I went into the iMac System preferences > sound > input. There are three options here: Internal microphone, Line-in, and Soundbooth 3.0.
What I found is that whenever I plug my earphones into the iMac, the option for 'Internal microphone' changes into an option for 'external microphone'. Now, I am fairly sure that an 'external microphone' is EXACTLY the same thing as a 'Line-in', but I'm not so sure now, so please feel free to correct me if I am wrong.
How do I stop the iMac from changing 'Internal microphone' to 'External microphone'? It is very important that I am able use the earphones and the Built-in Mic at the same time.

Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

How to add image in virtual dir / i/ 11g when using the embedded gateway

Hi,
Does somebody knows how to 'simple' import a file or directory
into the /images/ or /i/ directory created by APEX without tricks like in How I added a new image to APEX in 11g when using the embedded gateway.
when using Database 11g with the embedded gateway. with webdav of ftp.
When I use the url http://localhost/images
I need to logon.
There is not 1 username/password that I can use. I tried all.
When I try http://localhost/i/16admin.gif then the gif is shown.
I must be something with ACL's or DBMS_EPG or maybe the default port 80 that I use?
My configuration is
Doing 11.1.0.6.0 checks
############# Status/Version #############
XDB Status is: VALID at version 11.1.0.6.0
############# OTHER DATABASE FEATURES #############
Oracle Application Express is VALID at version 3.1.2.00.02
OWB is VALID at version 11.1.0.6.0
Oracle Enterprise Manager is VALID at version 11.1.0.6.0
Oracle Ultra Search is VALID at version 11.1.0.6.0
OLAP Catalog is VALID at version 11.1.0.6.0
Spatial is VALID at version 11.1.0.6.0
Oracle Multimedia is VALID at version 11.1.0.6.0
Oracle XML Database is VALID at version 11.1.0.6.0
Oracle Text is VALID at version 11.1.0.6.0
Oracle Expression Filter is VALID at version 11.1.0.6.0
Oracle Rules Manager is VALID at version 11.1.0.6.0
Oracle Workspace Manager is VALID at version 11.1.0.6.0
Oracle Database Catalog Views is VALID at version 11.1.0.6.0
Oracle Database Packages and Types is VALID at version 11.1.0.6.0
JServer JAVA Virtual Machine is VALID at version 11.1.0.6.0
Oracle XDK is VALID at version 11.1.0.6.0
Oracle Database Java Packages is VALID at version 11.1.0.6.0
OLAP Analytic Workspace is VALID at version 11.1.0.6.0
Oracle OLAP API is VALID at version 11.1.0.6.0
############# XDBCONFIG INFORMATION #############
acl-max-age= = = 15
acl-cache-size= = = 32
case-sensitive= = = true
call-timeout= = = 6000
max-link-queue= = = 65536
max-session-use= = = 100
persistent-sessions= = = false
default-lock-timeout= = = 3600
xdbcore-logfile-path= = = /sys/log/xdblog.xml
xdbcore-log-level= = = 0
resource-view-cache-size= = = 1048576
extension= = = au
mime-type= = = audio/basic
extension= = = avi
mime-type= = = video/x-msvideo
extension= = = bin
mime-type= = = application/octet-stream
extension= = = bmp
mime-type= = = image/bmp
extension= = = css
mime-type= = = text/css
extension= = = doc
mime-type= = = application/msword
extension= = = eml
mime-type= = = message/rfc822
extension= = = gif
mime-type= = = image/gif
extension= = = htm
mime-type= = = text/html
extension= = = html
mime-type= = = text/html
extension= = = jpe
mime-type= = = image/jpeg
extension= = = jpeg
mime-type= = = image/jpeg
extension= = = jpg
mime-type= = = image/jpeg
extension= = = js
mime-type= = = application/x-javascript
extension= = = jsp
mime-type= = = text/html
extension= = = mid
mime-type= = = audio/mid
extension= = = mov
mime-type= = = video/quicktime
extension= = = movie
mime-type= = = video/x-sgi-movie
extension= = = mp3
mime-type= = = audio/mpeg
extension= = = mpe
mime-type= = = video/mpg
extension= = = mpeg
mime-type= = = video/mpg
extension= = = mpg
mime-type= = = video/mpg
extension= = = msa
mime-type= = = application/x-msaccess
extension= = = msw
mime-type= = = application/x-msworks-wp
extension= = = pcx
mime-type= = = application/x-pc-paintbrush
extension= = = pdf
mime-type= = = application/pdf
extension= = = png
mime-type= = = image/png
extension= = = ppt
mime-type= = = application/vnd.ms-powerpoint
extension= = = ps
mime-type= = = application/postscript
extension= = = qt
mime-type= = = video/quicktime
extension= = = ra
mime-type= = = audio/x-realaudio
extension= = = ram
mime-type= = = audio/x-realaudio
extension= = = rm
mime-type= = = audio/x-realaudio
extension= = = rtf
mime-type= = = application/rtf
extension= = = rv
mime-type= = = video/x-realvideo
extension= = = sgml
mime-type= = = text/sgml
extension= = = svg
mime-type= = = image/svg+xml
extension= = = tif
mime-type= = = image/tiff
extension= = = tiff
mime-type= = = image/tiff
extension= = = txt
mime-type= = = text/plain
extension= = = url
mime-type= = = text/plain
extension= = = vrml
mime-type= = = x-world/x-vrml
extension= = = wav
mime-type= = = audio/wav
extension= = = wpd
mime-type= = = application/wordperfect5.1
extension= = = xls
mime-type= = = application/vnd.ms-excel
extension= = = xml
mime-type= = = text/xml
extension= = = xsd
mime-type= = = text/xml
extension= = = xsl
mime-type= = = text/xml
extension= = = zip
mime-type= = = application/x-zip-compressed
extension= = = htc
mime-type= = = text/x-component
extension= = = xbl
mime-type= = = text/xml
extension= = = en
lang= = = english
extension= = = gzip
encoding= = = zip file
extension= = = tar
encoding= = = tar file
session-pool-size= = = 50
session-timeout= = = 6000
ftp-port= = = 0
ftp-listener= = = local_listener
ftp-protocol= = = tcp
logfile-path= = = /sys/log/ftplog.xml
log-level= = = 0
session-timeout= = = 6000
buffer-size= = = 8192
http-port= = = 80
http-listener= = = local_listener
http-protocol= = = tcp
max-http-headers= = = 64
max-header-size= = = 16384
max-request-body= = = 2000000000
session-timeout= = = 6000
server-name= = = XDB HTTP Server
logfile-path= = = /sys/log/httplog.xml
log-level= = = 0
servlet-realm= = = Basic realm="XDB"
welcome-file= = = index.html
welcome-file= = = index.htm
servlet-pattern= = = /Test
servlet-name= = = TestServlet
servlet-pattern= = = /oradb/*
servlet-name= = = DBURIServlet
servlet-pattern= = = /orarep/*
servlet-name= = = ReportFmwkServlet
servlet-pattern= = = /i/*
servlet-name= = = PublishedContentServlet
servlet-pattern= = = /apex/*
servlet-name= = = APEX
servlet-pattern= = = /images/*
servlet-name= = = IMAGES
servlet-name= = = TestServlet
servlet-language= = = Java
display-name= = = XDB Test Servlet
description= = = A servlet to test the internals of the XDB Servlet API
servlet-class= = = xdbtserv
servlet-schema= = = xdb
servlet-name= = = DBURIServlet
servlet-language= = = C
display-name= = = DBURI
description= = = Servlet for accessing DBURIs
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = ReportFmwkServlet
servlet-language= = = C
display-name= = = REPT
description= = = Servlet for accessing reports
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = PublishedContentServlet
servlet-language= = = C
display-name= = = Unauthenticated File Access Servlet
description= = = Servlet for files for unauthenticated users
param-name= = = RootFolder
param-value= = = /images
description= = = RootFolder
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = APEX
servlet-language= = = PL/SQL
display-name= = = APEX
database-username= = = ANONYMOUS
default-page= = = apex
document-table-name= = = wwv_flow_file_objects$
document-path= = = docs
document-procedure= = = wwv_flow_file_mgr.process_download
nls-language= = = american_america.al32utf8
request-validation-function= = = wwv_flow_epg_include_modules.authorize
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = IMAGES
servlet-language= = = PL/SQL
display-name= = = IMAGES
database-username= = = APS
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
allow-mechanism= = = basic
nonce-timeout= = = 300
xdbcore-xobmem-bound= = = 1024
xdbcore-loadableunit-size= = = 16
acl-evaluation-method= = = ace-order
############# XMLTYPE Tables #############
XDB has 1 XMLTYPE TABLES stored as CLOB
XDB has 24 XMLTYPE TABLES stored as OBJECT-RELATIONAL
XDB has 11 XMLTYPE TABLES stored as BINARY
############# XMLTYPE Columns #############
XDB has 3 XMLTYPE Columns stored as CLOB
MDSYS has 24 XMLTYPE Columns stored as CLOB
SYS has 1 XMLTYPE Columns stored as CLOB
ORDSYS has 9 XMLTYPE Columns stored as CLOB
############# XMLTYPE Views #############
############# XMLTYPE INDEXES #############
XDB has 1 XMLTYPE Indexes of type CSX
############# Items built with XML API's #############
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY MDSYS.SDO_WFS_PROCESS
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY FLOWS_030100.WWV_FLOW_DATALOAD_XML
PACKAGE BODY MDSYS.SDO_OLS
PACKAGE BODY FLOWS_030000.WWV_FLOW_DATALOAD_XML
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XDB
PACKAGE BODY XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE XDB.DBMS_XSLPROCESSOR
PACKAGE XDB.DBMS_XMLPARSER
PACKAGE XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XMLINDEX
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA_INT
PACKAGE BODY XDB.DBMS_XMLTRANSLATIONS
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
############# XML SCHEMAS #############
MDSYS has 4 registered.
EXFSYS has 2 registered.
ORDSYS has 17 registered.
XDB has 25 registered.
SYS has 43 registered.
############# Repository Resources #############
MDSYS has 9 resources.
EXFSYS has 3 resources.
ORDSYS has 20 resources.
XDB has 28 resources.
SYS has 12634 resources.
############# Network ACLs Configured #############
mail.4aps.be has network acls configured for ports 25 through 25
* has network acls configured for ports through
* has network acls configured for ports through
############# DBMS_EPG DAD USAGE #############
APEX
IMAGES

Hi Jules,
You need a user with XDBADMIN rights to access the WebDav. Once you have access, you can open the URL as webfolder (in IE).
Regards,
Christian

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model:          ATI Radeon HD 4850
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x944a
Revision ID:          0x0000
ROM Revision:          113-B9110C-425
EFI Driver Version:          01.00.383
Displays:
iMac:
Resolution:          2560 x 1440
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Connection Type:          DisplayPort
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          2A80273WXMN
Mirror:          Off
Online:          Yes
Rotation:          Supported

Firefox 33 doesn't display a pdf file when using the response object

Firefox 33.0.2 does not display pdf files when using the code below from an asp.net program, which works for previous versions of Firefox, and also works with IE. I'm using the built-in pdf viewer. All of my plugins are disabled.
Dim strPDF As String
strPDF = Session("filname") 'pdf filename
Response.Clear()
Response.ClearHeaders()
Response.Buffer = True
Response.ContentType = "application/pdf"
Response.CacheControl = "Private"
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
Response.WriteFile(strPDF)
Response.Flush()
Response.Close()
Response.Clear()
Response.End()
Session("filname") = ""

Thanks cor-el. You pointed me in the right direction. It appears to me that a reported Firefox 33 bug with the handling of compression (Transfer-Encoding: chunked) is the culprit (https://support.mozilla.org/en-US/questions/1026743). I was able to find a work-around by specifying the file size and buffering. Below is my code, with some code from http://www.codeproject.com/Questions/440054/How-to-Open-any-file-in-new-browser-tab-using-ASP.
Dim strPDF As String
strPDF = Session("filname") 'pdf filename
Dim User As New WebClient()
Dim FileBuffer As [Byte]() = User.DownloadData(strPDF)
If Not (FileBuffer Is Nothing) Then
Response.Clear()
Response.ClearHeaders()
Response.CacheControl = "Private"
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
Response.ContentType = "application/pdf"
Response.AddHeader("content-length", FileBuffer.Length.ToString())
Response.BinaryWrite(FileBuffer)
Response.Flush()
Response.Close()
Response.Clear()
Response.End()
End If
Session("filname") = ""

I can;t get firefox to use my usb web cam. It always uses the built in i sight cam

fire fox uses the built in cam and does not recognize my USB webcam. Independent programs such as Skype, yahoo messenger and I chat have no problem with the USB cam.

hello cl092, unfortunately there are currently authentication issues with the sync server - the admins are investigating this issue. maybe keep an eye on this thread to get updates when sync is restored to working order again: https://support.mozilla.org/en-US/questions/966368

How to use the built in TV tuner in a GX 600???

Hi to everyone.
I would like to know how to use the built in tv tuner card in my gx 600.. I tried but it didnt detect any signal for tv..I wondering if I am doing something wrong. Your knowledge will be greatly appreciated.Thanks.
GX600 owner.

I am in Asia particularly in the Philippines Sir.
Yes I do see it in device manager labeled DVBT hybrid TV device. I think thats the tuner card right?
The program I am running to configure it is Windows Media Center, I am using a windows 7 OS..I connected the portable antenna and tried also a tv antenna but when it scans for signals it tells me it cant see any signal or channel at all.I am in a place where TV's connect to a channel even though your just using an aluminum tube..so signal is really good so I cant seem to figure out why it cant detect any..T_T.Thanks for your response sir..greatly appreciated.

When using the built-in peak

Similar Messages

Maybe you are looking for