When using the line tool, The line doesn't show up in the box

When I click the line tool and use it in the white box it does not show up at all but it will show up outside the box. Please help.

I would have thought that was impossible!
Does your account details include your name?

Similar Messages

The MacBook Pro turn on but not show anything on the screen.. Please help me

I have a MacBook Pro15 2011 2.2 i7. The computer turns on and makes the chime and you can hear it and the fan runs but the problem is that it doesn't show anything on the screen and the apple logo doesn't turn on Also none of the ports works

Try these 3 things
SMC reset:
http://support.apple.com/kb/HT3964
Try a pram reset:
Power off, power on, hold the following keys, option,comand,P,R (no commas) hold thes keys till you hear the start chime 2 times, the release. Reboot and see if you have anything
The other thing you can try is a safe (be patient as this will take a little longer boot). power off, power on holding the shift key continue to hold the shift ket till you see the progess bar, then you can release the key, let it finish booting, and try doing some things on the machine. This will disable the 3rd party software so only native sftware will run. f all is well there is a problem with a3rd party application causing the issue. Try rebooting mormal, snd see if things have gotten better.
If not take it to the Apple store and have it disgnosed, they do not charge for this, and will give a price of repair. Most of the time it is a flat rate, if there is no evidene of liquid damage they will repair what is broken for the same price. About 13rd the price of a replacement. If your machine is less than one fear old it should be covered by the warranty, if you have ApplECare you have 3 years from date purchase.
All the best

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool?

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!

If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

My iPod dispalys this message: "Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?

I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?

Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy

When I rip a cd, then use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?

When I rip a cd in itunes, then go to use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here? I am running the x64 version of itunes in Windows 7.

Just wanted to say that you're not the only one with the problem: http://discussions.apple.com/thread.jspa?messageID=13009436

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

When I connect my ipod to my mac air it doesn't seem to recognize it- it doesn't show up on the screen. What can I do ?

When I connect my ipod to my mac air it doesn't seem to recognize it- it doesn't show up on the screen. What can I do ?

Try using RecBoot to kick it out of recovery mode. If that does not work, try a manual install, as outlined in link below. If it STILL keeps entering recovery mode, you most likely need a new logic board.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room.

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room. I have very little room left on the hard drive and need to move an iPhoto library.

i have a lacie, and i encrypted it. i had to wipe it, because it kept dropping off over and over and re-logging in. so unencrypted i went.
at some point it wasn't recognized at all. sometimes disk utility would open it, but then it got to the point that it wouldn't recognize it either.
i hadn't realized that the power supply was dysfunctional. but i was able to recover it using disk warrior at the last deep breath it took. the disk itself still works, but not in that housing.

Can I delete a previous recipient so it doesn't show up on the list when I start to type in an email address?

I have some "bad" email addresses in my iPad mail that keep popping up when start to type in an email address. On my Mac, I can delete previous recipients in the Mail program, but it doesn't carry over to the iPad, even when I synch it. Is there anything I can do to get rid of previous recipients on the iPad (or iPhone!)?

Unfortunately, there is nothing you can do about this. It's been asked about a lot here. Leave feedback for Apple at
http://www.apple.com/feedback/iPad.html

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time?

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time? Much appreciated.

I can't use the keyboard to scroll. I need to keep my hand on the mouse, otherwise I'd never get anything done. Since I have no problem getting Firefox to scroll one page at a time, and I'm constantly jumping between 3 browsers, it would be nice to be able to scroll a full page at a time in Safari, just like I can in Firefox. Thanks.

I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

I believe what it's supposed to mean is that some changes were made to the document on another device, and those changes were saved back to the cloud. Now you've opened iWork on a different device to access that document - it compares the document you've got locally with the one in the could, sees some recent changes and downloads them.
What gets me is why this sometimes happens even when I've not made any changes to a document from another device.

When using the line tool, The line doesn't show up in the box

Similar Messages

Maybe you are looking for