When viewing a video computer shuts down,says no sync ,why

when i view a video such as on yahoo.com,it will play about 2 minutes and computer shuts down, and on my screen it says no sync

What version of flash player do you have installed? http://www.adobe.com/software/flash/about/
Please post the graphics section from about:support

Similar Messages

G4 mirror/when put to sleep computer shuts down, power up problems

I'm having some strange problems here, and I've looked through the topics and I can't find one that exactly fits my issues.
Recently my mac shut off when I put it to sleep and It would not turn back on, also the button would not light up when pressed. I unplugged it, checked the power source and when I plugged it back in the button light would come on when immediately touched and then go out, again not starting(note: my external hard drive comes on and after a few seconds shuts off). After trying it several times I gave up. About 4 hours later I tried it again and it started.
This has happened every time I've either shut down or put it to sleep. I feel very uncomfortable leaving my computer on all the time.
I tried the PMU reset my mac immediately started up, I thought problem solved until I put it to sleep again. Shut down wouldn't start up.
Exchanged batteries with the exact same computer from work, did a PMU reset, the Mac started right up. Put it to sleep same deal.
I am buying a new battery today.
I find it strange that when the mac is immediately shut down either by me or when it goes to sleep, the button light won't come on unless I unplug it from the back and replug it in. Then the button light will come on but not necessarily start up. I sometimes have to wait hours or it will come back on immediately.
right now its a crap shoot.
please help if you can.

Yuk. I don't even like to discuss this, but depending on the service, the filter caps in the psu and many other places in the system wear out and start causing problems. I would start monitoring voltages coming from the psu to the mother board using a digital multimeter. You can probe the white connector from the psu to the mother board from the top of the connector using a paper clip or dental pick on the connector pins. I believe this diagram is applicable to most of the ppc Macs:
http://docs.info.apple.com/article.html?artnum=58561
Also consider that your drive may be at fault here. My DA does not like to be put to sleep. It does strange things when put to sleep.

Computer shuts down when calibrating

Hi.. I've been having problems when trying to run the Battery Calibration and the computer shuts off when it gets to the discharge part of the calibration. Seems to be when it hits the 15 to 20% part of the discharge. I'm using a Compaq Presario CQ56-219WM and running Windows 7 64 bit Home Premium. The battery calibration that I am talking about is when you first start the computer... press ESC to get menu and press F2 for Advanced Diagnostics then Battery Calibration. It checks to see if battery is there.. whether it is charged and charges if needed then goes into the drain battery part to find lower limit or 0% of the battery. It doesn't show any errors detected up to the part of discharging the battery and don't even show that the test was even run in the error log of the Advanced Diagnostic Menu. I've tried restoring the Bios to default values, uninstalling and reinstalling everything (programs and drivers), did a restore drive to original and updating everything and all is STILL the same. I've tried calibrating in Windows with the Support Assistant and all I get is the battery needs calibrated is this (after running calibration - waiting 3 hours plugged in and recalibrating:
Status (upper left hand corner): needs calibrating (20) and Charge capacity 51%
Over to the right side of the Screen: Failure ID - OK Design Capacity 4400 mAh Full Charge and Remaining Capacity: 2254 mAh Terminal Voltage: 12366mV Design Voltage: 10800 mV Cell Voltage1: 4148 mV Cell 2 voltage: 4125 mV Cell 3 Voltage: 4093 mV Status: E0 AC Power: True and a CT Number of 6BUED05BBZUE1G and showing a charge of 100%.
I realize the battery is getting old but all of this came on pretty much at the same time (short battery life and loss of calibration). I'm also running default values of HP Power Plan. Any ideas? Will a battery going bad cause all this? Why doesn't the Calibration when first booting the computer, shut down instead of doing the discharg/recharge thing... ? The power supply checks ok (checked with AC/DC meter).

is your notebook still in warranty? Warranty status check web page
It certainly seems by your description that the battery has issues.
Battery warranty is for one year, so it would be a good idea to replace it. Be sure that you buy a guaranteed compatible battery that comes with a one year warranty.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Since upgrading to Yosemite my computer closes down instead of going to sleep. When I restart I get a message saying your computer shut down because of a problem. Has anyone a similar problem? What is solution?

Since upgrading to Yosemite my computer (iMac late 2012 model) closes down instead of going to sleep. When I restart I get a message saying "your computer shut down because of a problem". Does anyone have similar problem? What is the solution?

Sorry, I was acting like it was an email. See below:
Sat Nov 8 14:00:39 2014
Panic Report ***
panic(cpu 0 caller 0xffffff802a21e80a): Kernel trap at 0xffffff7fabaa5e28, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d4e8000, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xffffff803cbbf000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff81352f3b50, RBP: 0xffffff81352f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803cbbf000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000e492137674, R11: 0x000000e4917aebcc
R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803cc90000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff7fabaa5e28, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81352f3800 : 0xffffff802a13a811
0xffffff81352f3880 : 0xffffff802a21e80a
0xffffff81352f3a40 : 0xffffff802a23a443
0xffffff81352f3a60 : 0xffffff7fabaa5e28
0xffffff81352f3bf0 : 0xffffff7fabbbd0a2
0xffffff81352f3cb0 : 0xffffff7fab9a64a3
0xffffff81352f3d00 : 0xffffff7fab9a91be
0xffffff81352f3db0 : 0xffffff7fab9a80f2
0xffffff81352f3dc0 : 0xffffff802a6d8008
0xffffff81352f3e20 : 0xffffff7fab9a8d0b
0xffffff81352f3e50 : 0xffffff802a6c5a03
0xffffff81352f3ee0 : 0xffffff802a6be797
0xffffff81352f3f00 : 0xffffff802a16be13
0xffffff81352f3fb0 : 0xffffff802a2192c7
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fab994000->0xffffff7fabf6afff
            dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fab679000
            dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fab8e1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7faa924000
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fab235000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000029e00000
Kernel text base: 0xffffff802a000000
__HIB text base: 0xffffff8029f00000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 981693498948
last loaded kext at 264463654768: com.apple.filesystems.msdosfs      1.10 (addr 0xffffff7facd6e000, size 69632)
last unloaded kext at 325959214682: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 61440)
loaded kexts:
com.apple.driver.AudioAUUC           1.70
com.apple.filesystems.autofs            3.0
com.apple.driver.AppleBluetoothMultitouch         85.3
com.apple.iokit.IOBluetoothSerialManager            4.3.0f10
com.apple.driver.AppleHWSensor   1.9.5d0
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AGPM        100.14.37
com.apple.driver.ApplePlatformEnabler    2.1.0d1
com.apple.driver.X86PlatformShim            1.0.0
com.apple.driver.AppleOSXWatchdog        1
com.apple.driver.AppleMikeyDriver           266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient          3.6.1
com.apple.GeForce    10.0.0
com.apple.iokit.IOUserEthernet       1.0.1
com.apple.Dont_Steal_Mac_OS_X      7.0.0
com.apple.driver.AppleThunderboltIP       2.0.2
com.apple.driver.AppleHWAccess   1
com.apple.driver.AppleHV    1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.3.0f10
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelHD4000Graphics       10.0.0
com.apple.driver.AppleIntelFramebufferCapri     10.0.0
com.apple.driver.AppleMCCSControl          1.2.10
com.apple.iokit.SCSITaskUserClient            3.7.0
com.apple.driver.AppleUSBODD      3.5.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache            35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage           2.6.5
com.apple.iokit.AppleBCM5701Ethernet   10.1.2b3
com.apple.driver.AppleSDXC           1.6.5
com.apple.driver.AirPort.Brcm4360           900.19.8
com.apple.driver.AppleAHCIPort     3.0.7
com.apple.driver.AppleUSBHub      705.4.1
com.apple.driver.AppleUSBXHCI     705.4.14
com.apple.driver.AppleUSBEHCI     705.4.14
com.apple.driver.AppleHPET           1.8
com.apple.driver.AppleACPIButtons           3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS       2.1
com.apple.driver.AppleACPIEC        3.1
com.apple.driver.AppleAPIC            1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          218.0.0
com.apple.nke.applicationfirewall   161
com.apple.security.quarantine        3
com.apple.security.TMSafetyNet     8
com.apple.driver.AppleIntelCPUPowerManagement        218.0.0
com.apple.kext.triggers         1.0
com.apple.driver.AppleBluetoothHIDKeyboard    175.5
com.apple.driver.AppleHIDKeyboard         175.5
com.apple.driver.IOBluetoothHIDDriver    4.3.0f10
com.apple.driver.AppleMultitouchDriver   260.30
com.apple.iokit.IOSerialFamily         11
com.apple.driver.DspFuncLib          266.5
com.apple.kext.OSvKernDSPLib      1.15
com.apple.iokit.IOAudioFamily         200.6
com.apple.vecLib.kext           1.2.0
com.apple.nvidia.driver.NVDAGK100Hal    10.0.0
com.apple.nvidia.driver.NVDAResman        10.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOUSBUserClient     705.4.0
com.apple.driver.AppleThunderboltEDMSink       4.0.2
com.apple.driver.AppleSMBusPCI   1.0.12d1
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleHDAController        266.5
com.apple.iokit.IOHDAFamily           266.5
com.apple.iokit.IOSurface     97
com.apple.iokit.IOAcceleratorFamily2         156.4
com.apple.AppleGraphicsDeviceControl     3.7.21
com.apple.iokit.IONDRVSupport      2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice       3.7.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass     3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
com.apple.driver.AppleUSBMergeNub       705.4.0
com.apple.driver.AppleUSBComposite        705.4.9
com.apple.driver.AppleThunderboltDPInAdapter            4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter         4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily         4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family       700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily           3.2
com.apple.iokit.IOAHCIFamily          2.7.0
com.apple.iokit.IOUSBFamily            705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime            2.0
com.apple.iokit.IOHIDFamily            2.0.0
com.apple.iokit.IOSMBusFamily       1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore     2
com.apple.driver.AppleMobileFileIntegrity            1.0.5
com.apple.driver.AppleCredentialManager           1.0
com.apple.driver.DiskImages           389.1
com.apple.iokit.IOStorageFamily      2.0
com.apple.iokit.IOReportFamily       31
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform         3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto     1.0
com.apple.kec.Libm   1
com.apple.kec.pthread          1
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD ST1000LM024, 1 TB
USB Device: HD-LBU3
USB Device: Hub
USB Device: Apple USB SuperDrive
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 23.4

My video app shuts down when I try to view a movie . It crashes when I open it.

The video app shuts down as soon as I press a movie. How do it fix it?

I have this same problem. Tried the solution, but it didn't help. Is there another app out there, that will pull my video files for viewing?!
It's annoying because I took my videos with me traveling, but now I can't watch them!!!!!

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Computer shuts down when backing up

Hello,
I am using an iMac with Mountain Lion 10.8.3. My Apple Airport Extreme is about one year old (fully updated and current). I am on a DSL connection with AT&T. I am backing up to an external 1.5 TB hard drive (non-Apple brand). There is lots of room remaining on that drive (about 700GB).
All backups in the past have been smooth sailing with no problem.
What's happening now are two things (but one of them I think I fixed). At first, Time Machine would try to back up but it would never succeed because it would give a message that there is not enough space available in the drive (it was saying that it needed 10 more GB of free space). But I know that's wrong. I could not figure out how to fix that issue, so I erased the drive completely and started over. Now, I no longer get the "full" message and all appears to be going well----UNTIL......(see next paragraph).....
Now what happens is that it begins doing the backup process like normal (this would be the first/initial backup since I erased the drive and started over), however, once it gets about 100 GB or so (very rough estimate), the computer SHUTS DOWN. It turns itself OFF. No error window, no warning, no nothing----it just "POOF" turns off. To get it working again, I have to push the power button to turn it back on. There is no error message when I turn it back on.
I am copying (below) the two most recent Time Machine messages from last night from that neat widget/app that I think pondini invented. I sure hope this helps to diagnosis what is wrong, because I'm stumped.
The backup log that says "Automatic" is the first one that failed where it claimed there was not enough space to complete the backup. Once I erased the drive completely and started "fresh", that is what the second "Manual" backup is.
Friday, April 5th
Starting automatic backup
Backing up to: /Volumes/Time Machine/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Event store UUIDs don't match for volume: 2TB HD
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Deep event scan at path:/Volumes/2TB HD reason:must scan subdirs|new event db|
Finished scan
Found 433286 files (625.62 GB) needing backup
751.26 GB required (including padding), 741.14 GB available
Deleted backup /Volumes/Time Machine/Backups.backupdb/ScottPeavler’s iMac/2013-04-04-110906.inProgress/D11ECC13-2EB1-4975-A041-8EEA74F1339B containing 4 KB; 741.14 GB now available, 751.26 GB required
Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
Deleted 1 backups containing 4 KB total; 741.14 GB now available, 751.26 GB required
Backup date range was shortened: oldest backup is now Apr 5, 2013
Backup failed with error: Not enough available disk space on the target volume.
Friday, April 5th, 7:58PM
Starting manual backup
Backing up to: /Volumes/Time Machine/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 7267FE51-06B9-318F-80B2-EC5D94A925E2 eventDBUUID: DBDDEE41-0BFF-4DB0-AB1A-F7D152B9E065)
Forcing deep traversal on source: "2TB HD" (mount: '/Volumes/2TB HD' fsUUID: B4DDE136-9D38-302F-A81E-4645F23F6D09 eventDBUUID: B8E29F6D-A35B-4E34-B733-7C2983BD24D9)
Found 1331692 files (837.62 GB) needing backup
1.01 TB required (including padding), 1.49 TB available
Can anyone kindly help? Thanks!

Do a verify of the local disk. The sudden complete failure sounds like a hard disk or memory issue.
A5 http://pondini.org/TM/Troubleshooting.html
So the hard disk is plugged into the computer directly?? If not, then I think you should do it that way. Backup to Extreme USB drive is not reliable.
YOu don't have an error message for the manual backup.. and I am uncertain what the problem is.
Do a reset of Time Machine. A4.
And try again with the hard disk plugged into the computer directly.
You can look at other suggestions on the troubleshooting page.
eg http://pondini.org/TM/C4.html
But if you are doing it with the usb drive in the Airport Extreme please read this.
http://pondini.org/TM/Airport.html

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

Computer shuts down when importing CDs to iTunes! HELP PLEASE!

Every time I try to import a CD onto iTunes, my computer shuts down. It will let me import one song at a time with no problem, but when I try to load a whole CD, the power just shuts off. Can someone out there who knows about computers please help me?

Do you have a dual core or dual processer? Sounds like it. Read this it should help you out.
Oh nm they changed the article to say they fixed the bug with the newest release from yesterday. Go download the latest version that came out yesterday and see if it helps you your PC. You probaly do have a dual processor. The new iTunes fixes that importing CD bug.

Computer shuts down when itunes store or quick time tries to open

I recently downloaded the latest version of itunes and quick time. when I try to go to the itunes store, try to use quick time or if a music video tries to load onto the itunes library from videora ipod converter, the computer shuts down. It happens every time. can anyone help.

iTunes will not download, but gives me the error code " not a 32bid win program" I am running a 64 bit system and have tried all the fixes that are listed.
Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

On shut down I get a window that says Continue the installation Choose abort if you wish to cancel the installation If I don't press anything or if I press Yes or Abort the message goes away and the computer shuts down. This has been going on for ov

I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1. For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation ABORT   YES".   If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down. But the next time I use the computer and then shut down the message is back. I have looked to see if there are any downloads pending or if there are any updates trying to download. I am very puzzled.

Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.

Computer shuts down when burning

Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
Toshiba Satellite

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Computer shuts down when importing

Hi everyone.
I've been having a big problem with ripping music from CDs onto my computer (using iTunes, of course). It seems that every time I begin importing a CD, my computer shuts down. There is no warning, no sound, no blue screen. The computer simply turns off. It does this at no other time, only when I am importing a CD. It's very frustrating, and has only recently been occuring. I've uploaded over 20 gigs of music before this with no problem. Any help would be appreciated.
Thanks,
Gordon

Are you sure your laptop isn't overheating? Mine can when doing things like importing/burning CDs (but not necessarily while doing other things like surfing the web unless I'm on for a long time). Like you said, my laptop would just click off with no warning or anything. I know you say you've imported music before, but since you have a laptop I imagine you've been moving it around and recently you may have moved it to a spot that isn't as well ventilated. After several instances of a burned lap and not so burned CDs, I finally figured out that was my problem ...
Toshiba Satellite A70 Windows XP

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
Message was edited by: ronfromwoodland hills

Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down.

Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
Restarting videos works and looks like video is getting deleted.
Just a bug report

You might want to report that to Apple instead of to the other users in this forum.
http://www.apple.com/feedback/iphone.html

When viewing a video computer shuts down,says no sync ,why

Similar Messages

Maybe you are looking for