When Viewing Adobe Connect Training, why are Audio/Video out of synch

I am a new Captivate 5.5 user and I have been using the Adobe Connect Training material to come up to speed on the product. However, I have noticed that when viewing presentations in Connect, over time, the audio and video eventually are completely out of synch. What is being discussed (in the audio) has nothing to do with what is being shown on the screen. This happens on all Connect Training videos.  I have a high-speed Internet connection and I never have problems with streaming content from other sources such as YouTube, etc.  What am I doing wrong?

Dang, though it was worth a shot.
Now, one user here, Jim Simon, uses similar, and has worked out a percentage that he adjusts the remote mic's material to fit with his camera. Cannot recall exactly now, but it seems that he alters the Audio by a factor of about 104%. My memory is cloudy on the exact figure, and Jim seems to be on extended holiday. Not sure now, if he uses the Rate Stretch, or runs his mic's audio through Audition. Sorry that the memory is so fuzzy now.
Good luck, and maybe Jim will show up with his exact figures, to give you a starting point.
Hunt

Similar Messages

  • Audio & Video Out Of Synch after Editing

    I edited a clip, and the audio went out of synch with the video. What did I do wrong? How do I fix it?
    Kate

    Kate,
    Tell us more about this Clip. What format is it in? Be as specific as possible. AVI doesn't tell us enough. What CODEC is inside? G-Spot is a great freeware program for giving you that info www.headbands.com/gspot
    How does it go out of sync, i.e. drifts from beginning until it's way out at the end, or starts out of sync in the beginning?
    There are likely workarounds for getting it back into sync, but those methods will depend on your answers.
    Good luck,
    Hunt

  • Simple AUDIO & VIDEO OUT OF SYNCH

    Lots of out of synch stuff out there, but all specialized.  Mine is SIMPLE.  COnnect a Canon Vixia HV40 HD DVD, do a capture, and audio and video are out of synch.  It starts fine, but as it goes it drifts away gradually.  I have NO IDEA what to do.  I am not an expert at this, just an ameteur who loves HD DVD.
    It happens upon capture - not when buring to Blu Ray, not when converting WMD files to Torpedo or artillery or atomic or U Tube files, or any other fancy stuff.  It's not my brand of BVlu Ray disks, it's not the label I stick on it. I don't do - don't even know how to do fancy editing.
    Just copy and burn is REALLY hard.
    Just seems so strange that basic capture is so damn difficult and should be so simple - audio just will not line up with video.
    HELP!!
    I have Win 7 64 Bit, al;l kinds of processor power, latest biggest hammer bought for video editing and gaming.  If you need specs I can send.

    First, a clarification... Capture is what you do via Firewire from a (usually, as far as I know) tape camera
    Please provide EXACT step-by-step details of what you are doing
    Also, provide details about the file
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • PE3 - Audio & Video out of synch on imported VOB files

    I have tried adding some footage imported from DVD & is saved in a folder on the PC (by the PE process).
    The file is stored as VOB 1 & VOB 2. When I import this file into the PE project the first half plays OK. When it plays onto the second file, the audio is lagging behind the video by a considerable amount.
    If I view the file separately (where it is stored) with Windows Media Player, it plays back fine.
    When I view the file in PE in the preview window, the out of synch fault occurs.
    Something is happening in the import process to the PE project.
    Anyone, have any ideas on the problem?

    Here is a reply that I posted to a past thread that will give you options for fixing the Out-of-Sync issues when trying to use VOB files within PE.
    In all cases it is better to not import VOB directly to PE, but convert to DV-AVI via one of these methods and then use the AVI format.
    The last bullet below sends you to a Muvipix link describing how to combine multiple VOB's from one disc to a single file, this will cure the Sync problem, then convert this file to DV-AVI for import to PE:
    I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
    PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
    I then load this DV-AVI into PE7.
    (PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
    Other options to try:
    Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
    Prism is a free convert utility and can be found here:
    http://forums.adobe.com/thread/415317?tstart=0
    Or load the VOB or Mpeg into PE, then use that to convert to AVI.
    (Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
    I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
    So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
    Post results, if any of this works for you...
    Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
    http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

  • FCE4 Capturing Audio/Video Out of Synch

    I run a school video lab and all of a sudden we have started to have major isues capturing HD video from our Canon Vixia cameras (both 30s and 40s). The audio and video is out of synch and I cannot figure out why. We are on iMacs running OS10.5 or above and capturing through firewire 800 cables.
    Our only salvation has been to capture through iMovie and then edit the footage in FCE.
    Any thoughts?

    Try here and the associated links:
    https://discussions.apple.com/message/9519074#9519074
    Can you tell us the Properties of the Sequence you are working with?
    Al

  • Audio & Video out of Synch

    Hi all,
    I'm having a persistent problem with Quicktime movies being out of synch under windows XP. The movies are originally developed on OSX and and as soon as i bring them over to XP the fun starts. I'm guessing it's a hardware compatibility issue as i can find no other posts regarding this matter, if anybody could shed any light i would be extremely grateful.
    AMD Athlon X2 Processor
    Sapphire HD2600 Pro Grafix
    1GB Ram
    I've tried Apple basic troubleshooting steps including disabling Direct X in QT and also switching to safe mode, i've also tried updating the ATI drivers and still no joy.
    Thanks in Advance

    Calm please. I'm sorry I didn't include that info.
    I am calm as a clam. You do not want to see me angry. Or sarcastic.
    And just so you know, I've been using FCP since V1.2 and I've just now started seeing this with the current version I'm running.
    I don't know you from a jar of Vick's VapoRub and I will not, I promise you, remember these bits on your next post. Neither will anyone else. If it's relevant, include it.
    Anyway. I shoot with Cannon [sic] XL-1s on Sony MiniDV premium tape stock and capture using a Panasonic AG-DV2000 deck.
    I have no idea what's causing this problem for you but I'd start there with a simple binary test. Take the same tape and capture from the Canon. Issue gone? then there's something about the way the Pano handles the Canon DV that your Macintosh doesn't like any more. I agree, very strange. And totally unacceptable. But there have always been weird and inexplicable discrepancies between Canon's and EVERYONE else's DV codecs. We shoot DVCAM with Sony and play on Sony decks. Seems to make ingestion simple and direct.
    If the problem persists, then something Apple has encouraged you to download recently has bollixed the Canon codec's interpolation into Quicktime, once again, totally unacceptable. i just don't know what you will do about it except try to coordinate with other Canon camera users and put your concerns in the FCP Feedback box.
    A good place to check and search for simliar issues will be creativecow.net and the LAFCPUG.
    Hope you get it fixed, I know it must be exasperating.
    bogiesan

  • Why are audio & visual not in synch on QuickTime Pro?

    Hi!
    I just downloaded QuickTime Pro and when I made a "new movie recording" my voice is not in synch with my lips—there's a lag.
    Why is that? Is it my processing speed? Memory issues? Preference settings I need to tweak? Or, am I just talking to quickly!?
    Help!
    Roma
    Roma

    Hi Roma!
    am I just talking to quickly!?
    Could be!
    This refers to iMovie, but it may also help you:
    iMovie: Improving audio and video synchronization
    http://support.apple.com/kb/TA25603?viewlocale=en_US

  • Why is audio & video out of sync in the source monitor?

    It is my second day with Premiere Pro CS5.5. I dit something and now is the source material out of sync. I re-imported the clip but it is still out of sync. All the other videos are fine. Please help!

    Not nearly enough information for anyone to try and help
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some is general about your computer and OS, some is specific to video editing
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

  • How Do I View Adobe Live Training Which has been Recorded?

       There was an Adobe Connect training session today that I was unable to view due to other commitments.  How do I view the recorded session of this?
    The actual session was:
    Adobe Captivate & Interactive eLearning
      June 06, 2013
    Interactions add life to eLearning courses by making it engaging for the learners. It helps learners actively participate in the course and hence improves learning and retention. Join Dr. Pooja Jaisingh and Vish as they show you how to transform the drab content screens to interactive eLearning courses in a few simple steps. They will also demonstrate how you can easily publish these courses to HTML5 and/or apps for mobile consumption. Don’t miss it!
    They provided a link during the beginning of the session, but it only pointed to live events:
    http://www.adobe.com/cfusion/event/index.cfm?event=list&loc=en_us&type=&product=Captivate& interest=&audience=&monthyear=
    Thank you,
    Mark

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
    * http://kb.mozillazine.org/Websites_look_wrong

  • .SWF files in Adobe Connect Training

    Hello,
    I’ve successfully created a Captivate project but when
    I add it to Adobe Connect Training I can only get the .swf to play
    if I don’t include the skin options (playbar). With the
    playbar all the loads in Adobe Connect is the playbar and no movie.
    Am I doing something wrong when publishing the original Captivate
    Project?
    Thanks.

    Hey Awk76
    Interesting one. Captivate is supposed to work with Connect
    really seamlessly. The problem comes from there now being 2 files
    (the skin...) instead of one.
    Good news is you can fix it. First of all, go into your
    Captivate and from the project menu, select skin (bottom one). In
    there, select the Borders (2nd tab) and untick Show Borders. Take a
    note of the Width field here. We'll use it later. But Andy I hear
    you cry - the playbar is now inside my movie covering up content.
    Don't panic. Press OK to the Skins dialog and go back to the
    Project Menu, and this time click Resize Project. What you're going
    to do is add a few pixels to the bottom of the project for the
    playbar to sit in. Make sure you
    untick Maintain aspect ratio (and save your project first)
    and then amend the height by the whatever was in the Width field in
    the Borders tab (see earlier)
    Ok - so now you've got the new height. In the "If new size it
    larger" section of the Resize project screen (which it should be)
    click the "Keep project the same size and fill background with
    colour" radio. You set the background colour to one of your choice
    and set the Project Postion to Top Center. Press Finish and
    Captivate will grind about a bit before returning you to the main
    screen.
    You'll notice that each slide now has a little bit more added
    to the bottom. The playbar will sit in this but Captivate will only
    produce 1 file, rather than 2. Perfect for Connect.
    P.S. it's a good idea to make sure you've done all your
    recording before you do this - this should be the last phase before
    publishing.
    P.P.S Apologies that this is a bit long...

  • Why does audio drop out when scrubbing iMovie events?

    Why. does audio drop out when scrubbing iMovie events?

    If the audio returns if you slow down scrubbing you are probably just scrubbing too quickly.

  • HT201272 Why are audio books not under purchased for download?

    Why are audio books not under purchased for download?

    cblampson wrote:
    I know that. The question is why, when every other media that is sold on iTunes is there.
    Becasue the audiobook distributors do not allow Apple do offer this.

  • When I am in Edit, why are Smart Fix and Balance unavailable to me?

    When I am in Edit, why are Smart Fix and Balance unavailable to me?

    I don't know what you mean by balance, since there's nothing by that name in PSE. If you go to the Enhance Menu do you mean that Auto Smart Fix and Adjust Smart Fix are grayed out? If so, go to Image>Mode and be sure you have an RGB file and that it's 8 bits.

  • After syncing my music onto my iphone5, why are songs grayed out and not playable

    after syncing my music onto my iphone5, why are songs grayed out and not playable?

    If you are syncing music to the iPhone automatically, you won't be able to drag and drop tracks on to the iPhone and the music will be grayed out.
    You'll have to Manually Manage the music.
    Configure iPhone, iPad, or iPod for manual management
    If you have iTunes 7 or later*, follow these instructions:
    Connect the device to your computer.
    Open iTunes.
    Select iPhone, iPad, or iPod in the Devices list.
    Click the Summary tab and select "Manually manage music and videos".
    Click Apply.
    Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content.

  • Why are menus grayed-out in trial version? how can I use the effects then?

    why are menus grayed-out in trial version? how can I use the effects then?

    Every piece of software has a learning curve, and its own terminology.  After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers. 
    There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily.  Might I suggest Adobe Premiere Elements.
    For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline.  This functionality is true of any video editing or compositing software I can think of,

Maybe you are looking for