When we are able to see the data in Tcode RSA3(Source system)

Hi,
Please help me!
In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
Give the detail for all types of data source and for all types of loads.
eg: Std data source for deltaload, Generic data source for full load.....etc...
Regards,
Shiva.

Sure...
I am doing enhancement for datasource '2LIS_05_QVUDN'.
I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
So my question is, What is the root cause for this....?
When we are able to see the data in RSA3 in source system.?
please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

Similar Messages

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

Problem in Compresses file.Not able to see the data in file

Hi All,
I am downloading file into application server.
Using:
OPEN DATASET file FOR OUTPUT FILTER 'compress'.
OR
DATA: l_command(100) type c.
   CONCATENATE 'compress ' p_file INTO lw_command SEPARATED BY space.
    ENDIF.
    CALL 'SYSTEM' ID 'COMMAND' FIELD lw_command.
When I see the file content it contains junk characters.
If I want to see the data Do I need to uncompress the file.
con't we see the data without uncompressing the file?.
Regards,
vinod

Hi,
Uncompress is required to read the content of an Compressed file.
OPEN DATASET DSN FOR OUTPUT FILTER 'compress'.
OPEN DATASET DSN FOR INPUT FILTER 'uncompress'.
The first OPEN statement opens the file so that the displayed data can be read into it in compressed form.
The second OPEN statement opens the file so that the data is decompressed when it is read from the file.
http://www.sapnet.ru/abap_docu/ABAPOPEN_DATASET.htm#&ABAP_ADDITION_8@14@

I Activate business content data source, but ca't able to see the data in

I activate business content data source in crm 2007 , when i go to RSA3, GIVE the data source and checking data, I can not able to find the data in that ,
q1) when activating the data souce then it have data i, OR we will run any sttings for that

Thanks for reply
I did same thing , I activated the data source in RSA5, then got to RSA3 i can not able to fine data in that data source,
is there is no data in tables?
or any other problem

Am I able to see the date/time an app was installed or deleted? I know your able to see purchased apps but what about free app info?

Ok, so I know if you go into Itunes and go to purchase history/ apps you can see the apps that have been downloaded in the past. What I want to know is if there is a way I can see the exact date/time the apps were downloaded/deleted.

Why can you not buy from the ipod?
What happens when you try?
Error message?
What does it say?
Any info?

Error in the Data Selection - Errors in Source System RSM 340

Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
John

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Not able to see the history period and data

Hello
I have 2 time planning bucket periods - history of 24 months and future 14 months.
have assigned both in the data view.
i have loaded the data from infocube to planning area and i got the successful message.
during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
i have not used 9AVHISTORY.
my issue is i am not able to see the history periods and hence not able to see the data in history.

Hi
The data get loaded and its also available in the planning area, as you defined the time bucket profile according it i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
I hope this answers your question.
Thanks
Amol

Authorisation problem when trying to see the data after loading

HI Everyone,
I loaded data in quality. when i am trying to see the data, i am getting the following messages
1.Your user master record is not sufficiently maintained for object Authorization Object for Plant
2.System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZCOPC_C21 ZCOPC_C21
3.System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZCOPC_C21 64
4.System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZCOPC_C21 64
Can any one of you tell whether it is a transport issue or some authorisation problem. Guide me how to solve this.
Thanks in advance for your help.

Hi,
After you get this error goto Tcode SU53 and then you'll get the object and activity for that auth object.
You can then go and check if this is enabled in your auth profile using SUIM tcode and going to users.
If its enabled then you need to check for values if you have authorization to display data for that particular plant.
This is an auth issue and you should get approval from the appropriate person in order for you to look at the Master data and then have the Security or Basis team grant you access to the same.
Cheers,
Kedar

HT201272 When a song is purchased from the I-Tunes store, is it essentially "recorded" onto your i-pod, or only "rented" when you are able to access wi-fi and the I-tunes app?

When a song is purchased from the I-tunes store (and we used a gift card to do so), is it "recorded" to your device (an i-pod, in this case) and you own that copy, or is it just "rented" for your listening when you are able to access the I-tunes app (and therefore need wi-fi).???

I thought the same thing, however, our son did not have access to Wi-Fi in the car earlier and said that he could not listen to his song because he couldn't access the I-Tunes Store--? Then once we were in a location with Wi-Fi again and he could get to it, he was able to listen to the song...? We are new to all this and not sure that we "did it right" in the first place. Thanks for your help!

Could not see the data in the report

Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.

Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone

Why we able to see the messeges in SXMB_MONI at SAP R/3 side??

Hi All,
When we are dealing with Proxy--File scenarios
After we triggered the proxy from SAP R/3 we are able to see the Messeges in MONI of SAP R/3.
But if I used IDOC--File scenario, then why can't i see the Msg's in MONI???
Regards
Suman

Hi,
One more query is
If i used Proxy --file scenario.
When this data will be converted into XML format.
Means before reaching to IE of SAP R/3????
Or after reaching to IE of SAP R/3??
I want to know the process flow of Proxy upto reaching of XI system
Can u please summarize these??
Double points are awaiting
Regards
Suman

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

When we are able to see the data in Tcode RSA3(Source system)

Similar Messages

Maybe you are looking for