When we have LSMW for migrating data then why we will go for Session/Call ?
Hi Guru's,
Could you please tell me ...
When we have LSMW for migrating data , why will go for Sessions/call Transaction for migrating? when we do with LSMW we can complete the object with less time then why we have will do with session/call transaction?
when we have to use LSMW ? and when we have to use SESSION/ CALL TRANSACTION ..
thanks in advance..
vardhan
LSMW can't upload large amount of data into the database.
Whereas BDC SESSION CALL /TRANSACTION method can upload large amount of data into the database.
The error capture method is superior in BDC.
BDC programs can be scheduled to run on periodic basis as per the customer requirements.
Similar Messages
-
how can I make extra storage on my phone when I have deleted any all data, pictures and files that I couldn't store in a dropbox and not have purchase additional storage?
Purchasing additional storage only applies to iCloud, not to the phone itself. You cannot purchase additional storage for the phone, only purchase a larger capacity phone. If you have deleted all of the content that you can, then that is all of the space that you have. What is it exactly that you are trying to do? Does this have to do with space for performing an OTA update of the iOS?
-
I live in Canada. Each time I travel to the US, I lose all calendar entries. I have to erase all data, then restore from an iCloud backup. Tedious. iPhone 4, iOS 7.1, sync set to all events. I only use the default calendar. Do I have an incorrect setting?
I did find another point worth mentioning.
I use my iPhone 4 with a corporate Exchange email account. I had deleted the account from my phone just before I did this backup/restore process...and I thought my battery drain was much, much better (if not outright fixed).
Later in the day, after seeing my battery life improve to near-new behavior, I re-added my Exchange mail account. Considering I have 1 yahoo account and 3 gmail accounts, the Exchange account adds a 5th email account.
What happened? Battery drain back to "worst case". Removing or re-adding the Exchange account is like toggling between decent and terrible drain conditions.
Bottom line is that I re-added a couple dozen applications and battery life didn't change. By far, the Exchange account drains the battery worse than any other app and setting. This account must be polling very frequently and since people tend to send very large file attachments to that account, perhaps those effect the battery drain even though I have the account set to not download attachments.
Anyone running Microsoft Exchange might be able to confirm what I see? If so I can open an enterprise ticket with Microsoft and bug them on this issue. -
after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened
Try downloading it with another browser.
If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer -
My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
For existing data in BI, client need to take a call to park the same from s
hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks®urds
sivajihi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank -
How do I Restore previous session when I have it setup correctly and it did not restore from last session? I have General is set to Show my windows and tabs from last time and Privacy set to remember history.
These to pages do NOT apply: https://support.mozilla.org/en-US/kb/restore-previous-session
https://support.mozilla.org/en-US/kb/how-do-i-restore-my-tabs-last-time
There is No option to restore previous session when I go into History. There is No Recent history in the History. It will show my history if I click on show History, but it won't restore it!Hi StuckAtHomeMom
try in PRIVACY panel to set : Firefox will: Use custom settings for history and :
Uncheck: [ ] "Always use private browsing mode"
Uncheck: [ ] "Clear history when Firefox closes"
check everything else and in Accept third-party cookies, set Keep until: they expire
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Why we will go for Queue delta instead of Unserialized and Direct delta ?
Hi Experts,
Why we will go for Queue delta instead of Unserialized and Direct delta ? specify any reasons for that ?
What happens internally when we use Queue delta , Direct delta ?
I will allocate points to those who help me in detail. My advance thanks who respond to my query.Hi,
Direct Delta
With this update mode, extraction data is transferred directly to the BW delta queues every time a document is posted. In this way, each document posted with delta extraction is converted to exactly one LUW in the related BW delta queues. If you are using this method, there is no need to schedule a job at regular intervals to transfer the data to the BW delta queues. On the other hand, the number of LUWs per DataSource increases significantly in the BW delta queues because the deltas of many documents are not summarized into one LUW in the BW delta queues as was previously the case for the V3 update.
If you are using this update mode, note that you cannot post any documents during delta initialization in an application from the start of the recompilation run in the OLTP until all delta init requests have been successfully updated successfully in BW. Otherwise, data from documents posted in the meantime is irretrievably lost. The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
Queued Delta
With this update mode, the extraction data for the affected application is compiled in an extraction queue (instead of in the update data) and can be transferred to the BW delta queues by an update collective run, as previously executed during the V3 update.
Up to 10,000 delta extractions of documents to an LUW in the BW delta queues are cumulated in this way per DataSource, depending on the application.
If you use this method, it is also necessary to schedule a job to regularly transfer the data to the BW delta queues ("update collective run"). However, you should note that reports delivered using the logistics extract structures Customizing cockpit are used during this scheduling. This scheduling is carried out with the same report which is used when you use the V3 updating (RMBWV311, RMBWV312 or RMBWV313).There is no point in scheduling with the RSM13005 report for this update method since this report only processes V3 update entries. The simplest way to perform scheduling is via the "Job control" function in the logistics extract structures Customizing Cockpit. We recommend that you schedule the job hourly during normal operation - that is, after successful delta initialization.
In the case of a delta initialization, the document postings of the affected application can be included again after successful execution of the recompilation run in the OLTP (e.g OLI7BW, OLI8BW or OLI9BW), provided that you make sure that the update collective run is not started before all delta Init requests have been successfully updated in the BW.
In the posting-free phase during the recompilation run in OLTP, you should execute the update collective run once (as before) to make sure that there are no old delta extraction data remaining in the extraction queues when you resume posting of documents.
Using transaction SMQ1 and the queue names MCEX11, MCEX12 or MCEX13 you can get an overview of the data in the extraction queues.
If you want to use the functions of the logistics extract structures Customizing cockpit to make changes to the extract structures of an application (for which you selected this update method), you should make absolutely sure that there is no data in the extraction queue before executing these changes in the affected systems. This applies in particular to the transfer of changes to a production system. You can perform a check when the V3 update is already in use in the respective target system using the RMCSBWCC check report.
In the following cases, the extraction queues should never contain any data:
- Importing an R/3 Support Package
- Performing an R/3 upgrade
For an overview of the data of all extraction queues of the logistics extract structures Customizing Cockpit, use transaction LBWQ. You may also obtain this overview via the "Log queue overview" function in the logistics extract structures Customizing cockpit. Only the extraction queues that currently contain extraction data are displayed in this case.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) More than 10,000 document changes (creating, changing or deleting a document) are performed each day for the application in question.
b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
With this update mode, the extraction data of the application in question continues to be written to the update tables using a V3 update module and is retained there until the data is read and processed by a collective update run.
However, unlike the current default values (serialized V3 update); the data is read in the update collective run (without taking the sequence from the update tables into account) and then transferred to the BW delta queues.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method since serialized data transfer is never the aim of this update method. However, you should note the following limitation of this update method:
The extraction data of a document posting, where update terminations occurred in the V2 update, can only be processed by the V3 update when the V2 update has been successfully posted.
This update method is recommended for the following general criteria:
a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
Thanks,
JituK -
Why we will go for Remote cube
Hi experts,
Why we will go for Remote cube instead of Basic cube, What are the advantages of Remote cube ? At what circumstances we wii go for Remote cube ?Hi,
the reason is.
Use SAP RemoteCubes if:
· You need very up-to-date data from an SAP source system
· You only access a small amount of data from time to time
· Only a few users execute queries simultaneously on the database.
Do not use SAP RemoteCubes if:
· You request a large amount of data in the first query navigation step, and no appropriate aggregates are available in the source system
· A lot of users execute queries simultaneously
· You frequently access the same data
link:
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Regards,
Senthil -
What do I do when I have done the update for IOS 6 on my iPad and it gives my a blue iTunes logo and picture of a power cord?
http://support.apple.com/kb/HT1808
-
Ideas for migrating data to new iMac from faulty eMac?
My wife's old eMac died, but she was able to copy her user folder (all 58+ GBs) to an external drive prior to it finally giving up the ghost. It was copied via finder (not cloned or done via Time Machine), so it doesn't appear to have permissions set (i.e., I can mount the disk on another computer and access all her files).
She needed her new iMac set up right away to finish some work, so only a few files have been transfered.
I don't know if Migration Assistant can deal with the files, but I'd rather not migrate her stuff at this point. Migration Assistant isn't particularly granular (i.e., you can't choose which apps or which email to transfer - it's all or nothing). I'd rather access her home folder (as the user) to clean out her files (i.e., email, downloads, iTunes, iPhoto, etc.) prior to migrating them to her new computer. At a minimum, I want to log into her old account to backup her contacts to transfer over (or access them some other way).
Can I set up a user account for her on another computer (same name and pw), go into the advanced accounts settings and point to her folder on the external drive, and then log into her account? Or do I need to do some terminal work?
I believe the HDD was corrupted by the HW failure, but if Target Disk Mode is preferable for what I want to do, then it might be worth some troubleshooting on the eMac to get Target Disk working."Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist"
excepted from, "kimaccdual: A Basic Guide for Migrating to Intel-Macs" by Kappy and others. -
Tools for migrating data (documents) from MS SQL to Oracle
Hi,
Please let me know if there any tools available for migrating documents from one database like MS SQL to Oracle. Currently our documents are stored in MS SQL and we are planning to implement KM for document management with Oracle as the database.
Regards,
SureshThe old manual style still works - create the scripts for the migration objects, then use search & replace to rename the schema for all affected objects and finally run the SQL script to create them in the Oracle database.
- Klaus -
Why to use chnage pointers for master data idoc why not the change idoc
Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.Hi,
It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
Regards,
Ferry Lianto -
Is there any VIEW or FM for pulling data from VBAK, VBAP?also for VBEP,VBBE
Hi Experts,
1) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBAK & VBAP,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
2) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBEP & VBBE,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
3) Am guessing FOR ALL ENTRIES is better than JOINS in PERFORMENCE perspective, Is am I correct?
thanq
Edited by: Srinivas on May 9, 2008 5:36 PMHi Srinivas,
You can use the view WB2_V_VBAK_VBAP2 for fetching data from VBAK and VBAP instead of using a JOIN. Note that, in the view, item data fields will have a I following the field name (POSNRI, MATNR_I are the item data fields from VBAP). The master data fields of VBAK are the same.
As far as i know, there are no standard views provided by SAP for VBEP and VBBE. Not sure if FM exists either.
While using FOR ALL ENTRIES clause make sure that you specify the entire primary key (EX. if selecting from VBAP specify VBELN and POSNR) as fields for selection or in the selection criteria. Its much better if you have the primary key in both. This is really important because without specifying the entire key and using FOR ALL ENTRIES will drastically bring down the performance. And also, If you are fetching not more than 100 or 200 entries using the clause it is fine, beyond that its same as using a select statement within LOOP...ENDLOOP.
So, you have to decide whether to use FOR ALL ENTRIES or a JOIN while selecting data depending on the requirement. If you don't have the entire key either in fields for selection or selection criteria, then its better to use a JOIN or VIEW.
The following is an example for using FOR ALL ENTRIES clause effectively.
Select VBELN
POSNR
MATNR
From VBAP
into Table T_VBAP
For All Entries in T_DATA
Where VBELN eq T_DATA-VBELN
And POSNR eq T_DATA-POSNR.
I hope this helps, Please let me know if you need further assistance. -
The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it up. Can anyone help me fix this?
Awesome. This is the iPhone 4 discussions! Have a nice day
Maybe you are looking for
-
Cannot install DBD::Oracle perl module with Oracle 11.2.0.3 client
Hi I have been trying to install DBD::Oracle perl module on a Centos 5.7 server which is running Oracle client version 11.2.0.3. I have installed all dependencies prior to attempting installing the same and I am running into the following error - /us
-
Hallow experts, I'm doing an interface from sap into anther application and in this interface (log interface) I use two function below in program and I have to send to customer in text file in which field of infotype change was made This to funct
-
We have setup a new custom service and assigned to only country group 10 - US in the Define Country specific Services Node. However, when we login as a PERNR in a non-us country group, he is able to view this service and launch the WDA application. A
-
Elements 11 Collage won't work.?
Elements11. Collage won't work. I get a message " Valid size not available for this creation" All other creations work.
-
with my new os6 third part app is empty. with os5 no. why?