When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/828024]''
when we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

See:
*https://developer.mozilla.org/en/Firefox_4_for_developers#Miscellaneous_DOM_changes
*http://www.cssplay.co.uk/menu/tablescroll.html
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Similar Messages

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

Just upgraded to 10.0.2 and now it can't findwebsites - three that I know were created with WordPress. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.

I get the following error message: Gone The requested resource / is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.

Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

Firefox 25.0 disabled kaspersky virtual keyboard and safe money ect how do i change back to the previous version as fire fox tells you to late in the update

firefox 25.0 disabled kaspersky virtual keyboard and safe money ect how do i change back to the previous version as fire fox tells you to late in the update to back track

Hello Bretus,
Thank you for contacting Mozilla Support and I'm sorry this update isn't compatible with the extensions you're using.
The Kaspersky support forums mention that those extensions will be updated soon, so that they are compatible with FF25. In the meantime, we do not recommend that you downgrade your version of Firefox, but you can find instructions and download locations for previous versions here:
[[Install an older version of Firefox|Install an older version of Firefox]]
Please let us know if this solves your issue.
Cheers, Patrick

I have had LR since LR3. I bought the original program and have done updates ever since. Do I need to keep the previous versions of LR for my LR5 to work?

Hope I can get some insight!

Just to be a little more specific, you do not need to keep LR3 installed on your computer, but the terms of your license with Adobe require you to not transfer LR3 to another person if you have upgraded to LR5; if you think of it that way, you should "keep" LR3 in that sense. The license terms allow you to have Lightroom (any version numbers) installed on any two devices (which could mean a Mac computer and a Windows PC, or a laptop or desktop, or any combination along those lines). If someone else were to attempt to register the same LR3 key you're supposed to still have to run your LR5 upgrade, either you or the other person could get blocked in that attempt.
Before upgrading, it's always a good idea to download and try out LR5 to make sure it runs well on the computer you want to use it on--some devices that can run LR3 well can't run a later version well, and if that applies to your hardware, it's best to figure it out before you've paid for LR5.

Firefox update 10 won't open and the previous version 3.6 won't load any pages. I have done everything this site said to do. HELP?

The last version of Firefox that I had was the one before 3.6. I stopped upgrading due to it always messing up and not working right for me... whether it be due to vista, or just errors on your part. My husband decided to upgrade firefox to the newest one two days ago because the version I had was just "too slow!" Ever since he did that, I cannot get firefox to open. No matter how many times I uninstall it and delete everything mozilla on my computer then reinstall after restarting my computer, it just refuses to open. Every time i try it says that firefox has stopped working. It cant even check for solutions. I then try to click on the icon and I get something that says: firefox.exe - Bad Image C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCP80.dll is either not designed to run n windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I have tried installing it over and over again several times, same message shows up. So i had clicked on the link to go download the previous version of firefox... what sucks is that the only version on the site is 3.6.27. I have never upgraded to this. So the second i installed that version, i now am able to open up firefox... BUT it is unable to connect. I have internet... a pretty bad ass connection. So my internet is not the problem. I then looked up how to fix that issue and did all 5 things listed under the Firefox cant load pages but other browsers can link. Still nada! I am now stuck using IE and going insane. I am on the verge of throwing my laptop out of the damn window because I have to wait 3 hours for google to load. Nothing is working for me... and it would be appreciated for something more. If i can get help with a ton of details on what to do or how to fix this issue... either version... i would greatly appreciate it. I am going nuts having to put up with IE because my husband decided to update Firefox to a version that sucks with vista!

Here is the system requirements page: http://www.mozilla.com/en-US/firefox/system-requirements.html.
http://www.mozilla.com/en-US/firefox/all-older has the latest 3.6.x version, and http://www.floodgap.com/software/tenfourfox/ is another option.

I have been able to open PDF docs using C# API Process.Start("Full_path_To_the_PDF_File") in windows 7 or windows 8 with all previous versions of Acrobat32 reader.

I have been able to open PDF docs using C# API Process.Start("Full_path_To_the_PDF_File") in windows 7 or windows 8 with all previous versions of Acrobat32 reader.
However, with v11.0, the same command, in Windows 8, it does not open the PDF document. I can see the Acrobat(32) started in the task manager, but the document does open. Not sure how I can troble shoot this problem. Any help would be appreciated.

I haven't use the C# API but I imagine it is the same as C ShellExecute. Which in turn is the same thing (in essence) as double clicking in Windows Explorer.
So... does Adobe Reader run normally on this machine?
And does it start and open if you double click on a PDF file?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

When I use yahoo images and i open an image in a new window, it tweakes out firefox so that panes are distorted and exerything, the whole firefox browser looks like an F5 tornado took it apart and lumped it on my desktop... is this a known glitch?

When I use yahoo images and open an image in a new window, the page, once I click its tab causes the entire browser to scramble graphically, making it nearly impossible to navigate further. I right-clicked and selected close tab. That regains the visual clarity of the browser. But how can I fix this to browse the images?

Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I assume these are POP accounts and all computers are set to remove from Server after downloading.
So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
Or get/setup IMAP accounts.

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this version, and they have no fix for it yet!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

When to use Apps adapter and DB adapter?

Hi All,
For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
Thanks,
ChitraDevi

As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
cheers
James

Hi when i use treeMap class and if i exit the program

hi
hi when i use treeMap class and if i exit the program,
what will happen? the information that i put in the treeMap will be disappear??
if it is like that,,how am i able to retrieve my data...when i restart my program..
once i put ID as key and put my customer information,
in it, after exit my program,, and i can't find
my customers by their ID,,,,,,,,,how can,,i solve it......

what will happen? the information that i put in the
treeMap will be disappear??Yes. Of course. If you want data to hang around you have to tell the computer. If you want anything to happen you have to tell the computer.
if it is like that,,how am i able to retrieve my
data...when i restart my program..Tada! Tell the computer. Your simplest option is to use Serialization.
Before exiting your program, serialize your TreeMap to disk. After starting your program serialize your TreeMap from disk.
First stop should be your text book to learn what Serialization is and how it works, then try to write some code, then ask us to help with any problems.
Dave.

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

Hi rixa03!
I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_3
If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ?

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ? The communications with the module are OK, because it shows when the current are open or closed.

Jorg,
I noticed that you claimed to be using the module in 0-20mA mode, yet the reading you are seeing is 3.5mA. This is the minimum value (with overranging) when the module is set to 4-20mA mode. My guess is that your module is defaulting back to 4-20mA mode, but your IAK file still thinks the module is in 0-20mA mode. You can verify this by using the find devices button in FieldPoint Explorer and then trying to write to the channel.
To fix this problem, you should use the snapshot feature to change the default power-up mode for that channel.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

Similar Messages

Maybe you are looking for