When we will go for TABLE, VIEW

Hi Experts,
I have doubt regarding Generic DS . If Standard DS are not match with the Business Requirement , then we will create Generic DS.
But iam asking What is the Exact Requirement to go for Generic DS in SD and MM. At what instance Standard DS are not match with the requirement in SD and MM Applications.
When we will go for TABLE, VIEW, FUNCTION MODULE, INFOSET
in realtime, What is Exact Requirement to go with these .
Plz provide Solutions ASAP.
I will allocate points to those who help me in detail. My advance thanks who respond to my query.

Hi,
as this is one of those questions already asked a lot of times I would strongly suggest to use the search functionality in the forums ASAP.
regards
Siggi

Similar Messages

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to set the font for table view contol

Dear All,
My requirement is to set Font type = Arial and size=1 for
Table View control. The same font should be for header, Rows and footer.
One way we are achieving it through the Renderer class. Where in we are we are supplying data, colums with html font tags.
Is there any simple way to fix font fot the entire TableView.
Thanks
Markandeya

An approach I've used is to override the CSS styles by adding code like the following to the top of the JSP page. It's a bit of a hack, but it did the job. You will need to find ALL the styles used in a table view, and override the font size.
<%-- OVERRIDE SOME CSS STYLES SO WE HAVE THE DESIRED TABLE CELL PADDING --%>
<style>

</style>

IMP: When will go HTTP and When we will go for SOAP????

Hey Experts,
Here i have requirement like that, I want to syn the date from SAP to external applications eg.., dot net So here which adapter i need to use here ,Either HTTP or SOAP??
When we will go for Http and when we will go SOAP ? and which suits for dot net applications and which suits for java kind of applications ...
Can you explain me what is the difference between this two adapter and which is the best one???
Thanks in Advance
Regards
JS

Sarathy,
So here which adapter i need to use here ,Either HTTP or SOAP??
It completely depends on the receiving system. I prefer web services, so if they can receive web services, then go for SOAP.
When we will go for Http and when we will go SOAP ? and which suits for dot net applications and which suits for java kind of applications ...
It completely depends on the scenario. In system integration, you first identify the scenario, and then choose the adapter which best suits the scenario.
On .NET applications, it's easier to create / maintain web services.
Can you explain me what is the difference between this two adapter and which is the best one???
Please do a search on SDN / SAP Help, you will find plenty of blogs / forum postings on this topic.
Regards,
Neetesh

How to make the Pager for table view as non editable?

Hi,
I am using an HTMLB pager for my table view .
It appears as Page '1' of 2 for examle.
But '1' is dispalyed in an input field.
How do I make this input field as disabled.
I just want to use the Vertical and horizontal indicators to traverse through the pages of the table view.
I do not want the user to enter the page number ..
Thanks,
Sachin

Look at SBSPEXT_XHTMLB sample, pages pager.bsp and pagerX.bsp.
If you use the external pager, then you can specify a format where a text string will only be displayed without an inputfield for editing.

Problem when creating a tcode for maintainence view

when i'm trying to create a tcode for maintainence view of table ,i used to fields view name: here i gave the table name;
update : x
now when i activated and executed the tocde the screen is showing some abnormal values in the display..this is happening in the development server..can any one help me on this..i can send the screen shot if required..thanks in advance,,
challa

hi,
thank you.
i have done the same...but here i dont want to skip the intial screen...so i didnt check that box..now comes the problem ..i can see some boxes with 'x' at the end of the paarameters..give me u r mail id i can send u the screen shot..
thanks,
challa

[iPhone] UI Design pattern for table views with properties and children?

Hello,
I'm getting started with iPhone development and I have a question about the proper way to display a list that has both properties of the list itself as well as the ability to drill down into the members of the list. For example, my data is a Group (of people say). The Group itself can have properties - the name of the group, group email address, web page, etc. - and it obviously has members which also have properties - name, address, etc.
In my table view, I want to show the Group members and have accessory/disclosure buttons on each row to show the details of a person, but I also want to be able to edit the properties of the group - Group name, etc. What's the UI pattern for editing the properties of the table itself?
I thought about having a tabbar that toggles between the list and the properties of the list.
I also thought about having a parent table that lists the groups (so I could have more than one) and then have accessory buttons on each group row. The UI would then have to be that the user taps the row to drill down to the group members and taps the accessory button to edit the properties of the group. Is that "proper" - tap the bar or tap the accessory icon in a table row?
Thanks

I don't think I'd use a tab bar.
You could break the table up into 2 sections, section 0 being the properties, section 1 the list.
Make section 0 just say 'Properties', then when you tap that row you drill down to a properties table, slap an edit button in the navigation bar to go into edit mode.

What is the real use of party ? When we will go for Parties?

Hi All
   what is party ? Why?
   when we will use this parties(ID)? where the real adv..lies ?
Pl...explain this one detail so that i can decide we will go for party or not?
regards
Rakesh

Hi Shabarish
         Thanks a lot ...it is really helpful...
       But thing is i am not getting the real use of it ...!!!
       before posting this question,i have gone through sdn but thing is where it is
       helpful to implement
       Try to provide some more information on this
Regards
rakesh

When we will go for BPM

Hi,
I want to know when exactly we go for bpm and how to work simple bpm scenario.

Hi Sreenu,
BPM is used for Stateful communications,suppose u have to delay message processing,or wait for other messages to arrive and then semd them all together,in that case use BPM.
We will use BPM when ever we want to do the following:
1.Controling or Monitoring of messages in XI
2. Collect or Merge the messages in XI
3. Split the messages in XI
4. Multicast a Message
5. Need to send an Alert
6. Transformation
With its BPM capability, SAP NetWeaver:
Exploits business-process efficiency by giving your business
users the ability to directly model, manage, monitor, and
analyze business processes
Enables continuous process improvement and the dynamic
modification of business processes
Extends the value of your companys core business investment
and maximizes the return on its strategic assets by providing
the ability to change process rules without additional IT
investment
Provides greater visibility into critical business operations for
better decision making by delivering the right information at
the right time
Allows the integration of people, applications, and internal
and external resources
Process step types:
Message relevant:
Receive: We use it to receive a message. By receiving a message we are sending the data into process. We can use it to start a process. We can use it for activating or using correlations.
Send: We use it to send either an asynchronous or synchronous message or an acknowledgement.
Receiver Determination: We use it to get a list of receivers for sub sequent send step. It calls the receiver determination that we configured in the integration directory and returns receivers list.
Transformation: We use it to change a message inside the process. E.g. bundling multiple messages into 1 or splits a message into multiple.
Using this we can create N:1 or 1:N or 1:1 transformations. In general scenario 1:N transformation is possible.
Process flow control Relevant:
Container: We use it to set a value for target container element at runtime. Target container element and assigned value must have same value.
Control: We use it to terminate the current process and to trigger an exception and to trigger an alert.
While Loop: To repeat the execution of steps within the loop.
Fork: We use it when you want to continue a process in branches that are independent of each other. E.g. to communicate with two systems that are independent to each other
Block: We use it to combine steps that you want to execute one after the other and which are to access the local data.
Empty: It has no influence on the process flow. We use it as a place holder for a step that has not yet been defined, and as a step with no functions for test purposes.
Wait: We use it to incorporate a delay in the process.
Switch: We use it to define different processing branches for a process
T.Codes for B.P.M:
SXMB_MONI_BPE
SXWF_XI_SW11
For Example a Small Explanation reg BPM for this Req we used BPM
A background program should be scheduled to run every 10 minutes to analyse any material records that have been created or changed or deleted that have occurred to the material master records in the last minute.
There are two Message Mappings involved in the whole scenario. First mapping is N:1 Mapping which will be used in BPM and second Mapping is 1:1 Mapping:
1. First Message Mapping  N: 1 u2013 Mapping between IDoc (occurrence u2013 0...unbounded in u201CMessagesu201D tab) to IDoc with changed occurrence of its top node (IDOC) as 0...unbounded. This message mapping will be used in BPM u2013 transformation step.
Description: This BPM collects all Idocs for 10 minutes which are of Message Type (ZMATMAS05) according to Receiver Partner Number (Field u2013 RCVPRN) and calls N: 1 mapping to bundle the collected Idocs in a One External Definition for that IDOC.
Use
You use a wait step ( ) to incorporate a delay in a process. Usually, you use a delay to define when the next step in the process is to start. You can define a delay as either a point in time or a period of time.
At runtime, the step waits until the specified point in time is reached or the specified period of time has passed. The system then continues the process by proceeding with the next step.
Expalined clearly how to do a file to file scenario with BPM :
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
it is File>RFC>File using BPM then refer this blog.
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
BPM-1 /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
BPM-2 /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
BPM-3 /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
BPM-4 /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
Integratio Scenario
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
Schedule BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
Use of Synch - Asynch bridge in ccBPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
without BPM1
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
IDOC BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
To deal with Multiple sender and receivers based on the conditions we could use BPM. Its one of the feature of BPM, but its not mandatory to go for BPM for each n every case. Its depends upon scnenario.
/people/marilyn.pratt/blog/2007/10/12/clubhouse-las-vegas-a-bpm-roadmap
BPM Process Patterns:Repeatable Design for BPM Process Models
http://www.bptrends.com/publicationfiles/05%2D06%2DWP%2DBPMProcessPatterns%2DAtwood1%2Epdf
BPM Steps link : http://help.sap.com/search/highlightContent.jsp
BPM-BUSINEES PROCESS MANAGAEMENT
*Transformation Error and still stuck ? *
/people/shabarish.vijayakumar/blog/2005/12/07/transformation-error-and-still-stuck
Walkthrough with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
Reconciliation of Messages in BPM
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Reconciliation of Messages in BPM Contd. - Restart Workflow
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm-contd--restart-workflow
*XI: How to... retrieve MESSAGE_ID from a BPM *
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
XI: Do you realy enjoy clicking and waiting while tracing BPM steps?
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps * *
BPM:Single Sender and Multiple Receivers based on synchronous exchange(switch) part-1
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
Collecting IDocs without using BPM
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm * *
*Multi-Mapping without BPM - Yes, itu2019s possible! *
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Sync/Async scenarios without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
XI/PI: BPM modeling in Aris for SAP Netweaver - a teaser
/people/michal.krawczyk2/blog/2006/11/27/xipi-bpm-modeling-in-aris-for-sap-netweaver--a-teaser
*XI: who said he cannot be stopped? BPM JIM - SP17 *
/people/michal.krawczyk2/blog/2006/06/27/xi-who-said-he-cannot-be-stopped-bpm-jim--sp17
*Schedule Your BPM *
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm * *
*how to integrate unified worklist to xi-BPM *
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb9100f8-0c01-0010-ac8e-e017351f3fc1
*Usage of Sync-Async when both Sender and Receiver are Synchronous Apps *
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Using a BPM to collect messages for a set interval of time
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Sync/Async scenarios without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm * *
*Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure *
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards,
Vinod.

Cannot select the fields for table view WB2_V_MKPF_MSEG2

Hi, I have a program where the query is using join statement of MSEG and MKPF. As part of the performance enhancement I use Table View WB2_V_MKPF_MSEG2 instead.
Validation: Entries in MSEG and MKPF is the same as in WB2_V_MKPF_MSEG2 = OK (via SE16)
But upon debugging the program on SY-SUBRC breakpoint, I can see 5 rows appended in internal table T_MSEG "BUT" the entries are all blank.
The entries in my SE16 are exact data that's appearing on the filter statement in my SQL query below. SE16 is giving correct output, but using table view in my SQL does not give me the correct output.
(Note: This is my first time to use table view in ABAP-SQL)
SELECT MATNR_I BWART_I MENGE_I
    FROM WB2_V_MKPF_MSEG2
      INTO CORRESPONDING FIELDS OF TABLE T_MSEG
WHERE MATNR_I IN R_MATNR3
      AND MATNR_I IN R_COMPNTS
      AND WERKS_I EQ P_WERKS
      AND BWART_I EQ '931'
     AND BUDAT    IN S_GSTRP
     AND MJAHR    EQ W_DOC_YEAR.
IF SY-SUBRC EQ 0.
ENDIF.
THANKS, appreciate your inputs.
Regards,
Jun

Hi Suhas,
I just did a short test just now:
REPORT ZTEST_SELVIEW.
TABLES: WB2_V_MKPF_MSEG2.
TYPES: BEGIN OF Y_MSEG,
         MATNR LIKE MSEG-MATNR,
         BWART LIKE MSEG-BWART,
         MENGE LIKE MSEG-MENGE,
       END   OF Y_MSEG.
DATA: T_MSEG TYPE STANDARD TABLE OF Y_MSEG.
SELECT MATNR_I
       BWART_I
       MENGE_I
FROM WB2_V_MKPF_MSEG2
INTO CORRESPONDING FIELDS OF TABLE T_MSEG
WHERE MATNR_I EQ '000000000000004000'
   AND WERKS_I EQ '0288'
   AND BWART_I EQ '931'
*   AND BUDAT   EQ '20071117'
   AND MJAHR   EQ '2007'.
IF SY-SUBRC EQ 0.
ENDIF.
In my debug, T_MSEG contains the same number of rows that my SE16>WB2_V_MKPF_MSEG2(using the hard coded statement in my SQL) "BUT" each rows does not have any entries. Bottomline, I can't only see blank entries in ITAB T_MSEG but the rows are being selected properly, so the itab contains x-number of rows with blank entries.
Thanks.

When we will go for an abstract class and when we will go for an interface?

it's always some what confusing to choose an abstract class and an interface,can anybody post a suitable answer for this.

jwenting wrote:
with experience and the insight it brings, you will know which to use when.
Without it, it can't be explained.
More often than not there's no X OR Y anyway.It's fortunate that there are posters here who possess the insight and experience necessary to explain this. The principal differences between an abstract class and an interface are,
1. An abstract class can carry implementation, whereas an interface cannot.
2. An abstract class is singly inherited, wheras an interface is multiply inherited.
So use an abstract class when the implementation it can carry outweights the fact that it cannot be multiply inherited That's the gist of it.
The inheritance relationship where this happens is when the supertype is a general concept of which all potential subtypes are special cases. This is called a specialization (or sometimes a generalization) relationship. For example Apple and Banana are Fruit. Or Car and Bike are Vechicle. The Fruit and Vechicle supertypes are general concepts of which their subtypes are special cases. In this case make Fruit and Vechicle abstract classes because the subtypes will benefit from a shared implementation.
If you don't have a clearcut specialization/generalization relationship make the supertype an interface. An example could be the Comparable supertype. The potential subtypes aren't supposed to be specializations of the Comparable concept, they're suppose to become Comparable (and make this property an integral part of their being). This is not a specialization/generalization relationship. Instead the supertype is intended to add character to the subtypes. The subtypes are unlikely to benefit from an inherited implementation. So make Comparable an interface.

ADF Table - Command buttons disappear when no rows returned for table

We have a command button that navigates to a create screen, when the table returns no rows the button disappears. We need to have this displayed always and within the ADF table. The code looks like:
<f:facet name="selection">
<af:tableSelectOne text=""
binding="#{Search.tableSelectOne1}"
id="tableSelectOne1">
<af:commandButton actionListener="#
bindings.ExecuteWithParams1.execute}"
text="Edit n"
action="edit"
binding="#{SearchCtgry.commandButton3}"
id="commandButton3">
<af:setActionListener from="#{row.Code}"
to="#{processScope.toCode}"/>
</af:commandButton>
</af:tableSelectOne>
</f:facet>

try placing the command button within the "actions" facet of the table. It will place it above the actual rows of the table. You could also use the "header" facet.
<af:tableSelectOne text=""
binding="#{Search.tableSelectOne1}"
id="tableSelectOne1">
<f:facet name="actions">
<af:commandButton actionListener="#
bindings.ExecuteWithParams1.execute}"
text="Edit n"
action="edit"
binding="#{SearchCtgry.commandButton3}"
id="commandButton3">
<af:setActionListener from="#{row.Code}"
to="#{processScope.toCode}"/>
</af:commandButton>
</f:facet>
</af:tableSelectOne>

Anybody knows when LaCie will update for Lion?

I can't enter my LaCie NetworkSpaceMAX - Lion don't support it...
Anybody knows when the update will come!

Maybe you find more info here: http://www.lacie.com/us/more/?id=10121
However, I'd rather have an option in OS X Lion to just use an older authenticatipon protocol for AFP (that's the reason it does not work with older devices) instead of updating all my devices.
Does anyone maybe has some console magic to enable legacy AFP support?

When we will go for Ectended Interface Determination

extended interface determination example give me any one...
Regards,
Vinay

Enhanced (Mapping-Based) Interface Determination
Use
In an enhanced interface determination, you do not enter the inbound interfaces manually, but first select a multi-mapping. You get the inbound interfaces from the target interfaces of the multi-mapping. The inbound interfaces are determined at runtime during the mapping step.
You typically use an enhanced interface determination if the source message has an element with occurrence 0 ... unbounded (for multiple items of a data record) and you want multiple messages (for the individual items) to be generated at runtime.
For example, you want to split an overall booking for a trip comprising connecting flights into individual booking orders (for each leg of the trip).
You cannot realize this usage case with a standard interface determination (without using an integration process). A standard interface determination does allow you to specify multiple (N) inbound interfaces (with different mapping). In this case, N messages with the same payload and different receiver interfaces are generated from the source message before the mapping step; these are then transformed differently depending on the receiver interface. Therefore it is conceivable to write the mappings in such a way that the first mapping from the source message generates a message that only contains the first item, the second mapping generates a messages that only contains the second item, and so on. However, this no longer works if the number of items can vary with each new source message.
You can use an enhanced interface determination to configure a mapping-based message split for this usage case. You assign the interface determination a multi-mapping that has a target interface with an element with occurrence 0...unbounded. At runtime, the individual messages (for the individual items) are calculated in the mapping step. First, the individual messages are grouped into a bulk message. Then, the bulk message is transferred to the Adapter Engine. The Adapter Engine then splits the bulk message up into the individual messages (see figure).
Procedure at Runtime During Message Split
Note that both the bulk message and all individual messages each have a message header with a receiver interface (see figure).
Receiver Interfaces of Bulk Messages and Individual Messages
The header of the individual messages contains the relevant receiver interface. It is based on the definition of the multi-mapping. Note that the receiver interfaces of the individual messages may be different. The receiver interface of the bulk message is always InterfaceCollection (namespace http://sap.com/xi/XI/System).
If the message split only results in one message, the original message structure remains the same. In this case, a bulk message containing just one individual message is not created.
You can also assign a multi-mapping with multiple different target interfaces to an enhanced interface determination (1:n transformation). Each target interface can contain elements with occurrence 0 ... unbounded.
Messages cannot be sent by using different Adapter Engines in a mapping-based message split. This affects configuration thus: All receiver agreements that have a receiver interface from the mapping entered in the key must only be assigned communication channels with the following adapter types:
-          RFC adapter
-          SAP Business Connector adapter
-          File/FTP adapter
-          JDBC adapter
-          JMS adapter
-          SOAP adapter
-          Marketplace adapter
-          Mail adapter
-          RNIF adapter
-          CIDX adapter
The adapters also have to all run on the same Adapter Engine.
Adapters developed by partners also support a mapping-based message split if they run on the same Adapter Engine.
Attachments from the original message are not appended to the messages resulting from the message split.
Activities
To execute a mapping-based message split, perform the following steps:
       1.      Integration Repository: Define the multi-mapping (see Developing Multi-Mappings for Message Splits).
       2.      Integration Directory: Define the interface determination.
Note the following:
○     The outbound interface of the multi-mapping must be entered as the sender interface in the key of the interface determination.
○     The interface determination type must be set to Enhanced.
○     Select the multi-mapping you defined previously from the Integration Repository.
To select the interface mapping, use the input help ( ).
The target interfaces of the interface mapping are displayed in the Inbound Interfaces frame.
The number of messages (for an inbound interface) created in the mapping step is displayed in the Occurrence column.
regards,
Raj

When we will go for aggrigation and partition of info cube

hi

Hi Babu,
If i give you an example on aggregates:
customer country   amt
100           USA      1000
100           GER      2000
200           GER      3000
300           IND       4000
if u create aggregates on customer dimension characteristic :the values are
customer amt
100          3000
200          3000
300          4000
Partition wil be done based on time characteriestics.
Both functionalities are used to improve the perfrmance of infocube.
Hope this helps.
Thanks,Ramoji.

When we will go for TABLE, VIEW

Similar Messages

Maybe you are looking for