When we will go to triggering events programatically and when throgh tab?

hi experts........
i am new to work flow can any one tell me that when we will trgger events programatically and when we will trigger through by events tab, what is differnce between them?
i searce in sdn/google but exactly i didnot get the answer?
thanks in advance

Sorry but forum is not for basic training, as you are asking "what are workflow events". Moreover, you should post (more elaborate questions) to workflow forum

Similar Messages

The Categories tab on my iPad 2 will not pull up the categories and the Genius tabe does not pull up anything at all. Any thoughts on what to do?

on my iPad 2, when I go into the iTunes store to look at apps, the categories tab will not pull up the categories list and therefore stays on my previous choice everytime and the Genius tab does not pull up anything. Please advise on how to fix. Thanks.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

TreeView Control not triggering event tvSkills_TreeNodePopulate and not expanding.

Hello Guys,
I am running my application on Azure. I have strange behavior on expanding TreeView throwing error at Application_Error of Global.Asax "Value cannot be null.\r\nParameter name: parameter".
But this behavior(TreeView) is working fine in non-Azure environment.
and my call stack:
at Microsoft.IdentityModel.Protocols.AuthenticationProtocolMessage.SetParameter(String parameter, String value) at Microsoft.IdentityModel.Protocols.WsFederationMessage..ctor(IEnumerable`1 parameters) at Microsoft.Owin.Security.WsFederation.WsFederationAuthenticationHandler.<AuthenticateCoreAsync>d__1f.MoveNext()
--- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task) at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult() at Microsoft.Owin.Security.Infrastructure.AuthenticationHandler.<BaseInitializeAsync>d__0.MoveNext() --- End of stack trace from previous location where exception
was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at Microsoft.Owin.Security.Infrastructure.AuthenticationMiddleware`1.<Invoke>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task) at Microsoft.Owin.Security.Infrastructure.AuthenticationMiddleware`1.<Invoke>d__0.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task
task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContextStage.<RunApp>d__5.MoveNext() --- End of stack
trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
 at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.<DoFinalWork>d__2.MoveNext() --- End of stack trace from previous location where exception was thrown ---
 at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at Microsoft.Owin.Host.SystemWeb.Infrastructure.ErrorState.Rethrow() at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.StageAsyncResult.End(IAsyncResult
ar) at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.EndFinalWork(IAsyncResult ar) at System.Web.HttpApplication.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously).
It would be greatly appreciated for solution
Divakar

Hi,
If your code works fine in non-Azure environment, but not work in Azure environment, I would suggest you use remote debug to troubleshoot your azure website, see the detailed steps here:
http://azure.microsoft.com/en-gb/documentation/articles/web-sites-dotnet-troubleshoot-visual-studio/, hope you can find the detailed errors.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

In Which table Will maintain the All Workflows Triggering Event Details?

Hi,
Can Any one tell me
In Which table Will maintain the All Workflows Triggering Event Details?

Hi Mohit,
The Tr Codes KE29N/KE28L will give me the Logs of Past TDD runs. However, i would like to see the all the variants in a go. Due to a Organizational change, there is a new characteristics introduced. Now we need to change the sequence of the TDD runs. Since there are lot of TDD Variants that are in use. we need to get all of them into an excel and then decide the necessary changes.
Thanks & Regards
Surya

Duplicated workflows for fast triggering event from CRM

Hello,
I'm facing an issue when a credit limit sales order is created in CRM.
They are creating the order and manking a change to it 5 seconds later. Those created and changed events are triggered with a difference of 5 seconds and in background, the first WF is triggered (with the created event) and 5 seconds later other instance of that WF is triggered (with the changed event).
The problem is that the first WF is not being logically deleted when the seconds one is created (it has a wait step at the beggining of the WF to end in case another instancer of the WF is triggered).
This is caused by a perfoirmance issue that when the seconds WF is triggered, the first one is still not listening to the changed event.
Do you know if there's any way to solve this?
Thanks!

Hi MatiasAZ,
In the first workflow(created) check the event. It should be the 'changed' event and proper binding should be there.
If everything is fine, after the wait for event create a process control with the option as 'Complete workflow'.
Initially your workflow should have the fork step type with two branches. Maintain the changed event wait step in one branch and created events step in other branch. So that the workflow will wait for 'Changed' event and workflow will be completed if the 'Changed' event occurs in the system.
Thanks,
Viji.

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Work Flow - Triggering Event through Webdynpro

Hi,
I am new to Workflow. I have generated the Workflow related to claim (Objects as ABAP Class). Now I have generated Webdynpro component and through this I need to execute the Workflow. I have used the FM SAP_WAPI_START_WORKFLOW & SAP_WAPI_CREATE_EVENT. To raise the event 'cl_swf_evt_event=>raise'. I have used. But this is not triggering event. So, Any one can help me on this issue.
In workflow using ABAP CLASS is essential or Business object.
In my case I have used only ABAP CLASS. In workflow I have generated the Triggering event as SAVE. In webdynpro I have generated the code in 'ONACTIONSAVE'. When ever the user clicks SAVE' button. Workflow shouild trigger and approver should receive the mail as notification and he/she will approve/reject the claim.
Thanks & Regards
Kannappan

After SAP_WAPI_START_WORKFLOW do you have COMMIT WORK?
Does the SAP_WAPI_START_WORKFLOW return some error message?
Are you sure that the event is not triggered? Check this with event monitor SWEL (turn monitor on in SWELS).
Also, ready Jocelyn Dart's blogs about ABAP OO. She have clear instructions about how to trigger ABAP OO events.
Regards,
Karri

Triggering events - status of the document

Hi folks,
I need to know what triggers the event SAVED in shopping card. What determines the occurance of this event? Does the SRM generates that event when shopping basket obtain proper status, for instance Completed?
I have to determine that moment, when system generates SAVED event which starts the approval WF. It's because I need to achieve situation where I can approve SC (external reqiurement) that is created from PM order (ERP). Normally SRM automatically sets the status of such a SC to Approved, and there is no approval. How can I change this status, and to which one, to obtain generation on event SAVED and in result triggering a approval WF? I need to be able to approve such a SC (external requirement).
Thanks for any replies!
RD

Hi,
Yes it is possible..
Just pass 'X' to the exporting parameter 'put_in_outbox'. The user can check the send mail in 'sost'. All the details of the mail will be there. This will be the proof that the mail was sent.
Reg the 2nd part of your query, if the mail is not delivered to any reciepent or to particular recipient, the details will be there in the SAP outbox, that also you can see through transaction 'sost'.
Thanks & Regards
Rocky

Issue in triggering events in task

Hi,
In my workflow there is a fork and after a fork there is a task for which triggering event is defined and this particular event is triggered from zprogram and agent for task is determined using a rule.
In zprogram logic is written as event (triggering event for task) is triggered when all 4 users in fork presses submit button.
Problem is when 4th user presses submit button workitem is created in workplace of agent defined for task and in 4th user as well.Workitem should not be created for 4th user.
Please suggest.
Regards,
Kaustubh.

Hi Rick,
I have defined single task in all branches of a fork with CONFIRM END OF PROCESSING tick in task. Task is to call ztransaction.
Problem is if all users in a fork enters into transaction and by clicking BACK comes out without pressing SUBMIT button in ztransaction and clicks COMPLETE WORK ITEM flow will go to task defined after fork which i dont want.
Flow should go to task after fork only when user presses SUBMIT and COMPLETE WORK ITEM button.
Hence I have created triggering event for task which gets triggered only after all user presses SUBMIT.
Please suggest.
Regards,
Kaustubh.

Multiple BIUs with one triggering event

Dear Experts,
I am trying to create a B1i scenario that does something similar to the following:
1. Journal Entry created in sender system by a user
2. Journal Entry created automatically in receiver system by B1i
This much works so far, my question is the next two steps
3. Another Journal entry created automatically by B1i in sender system
4. Finally another journal entry created by B1i in receiver system
So for one triggering event (manual adding of JE in sender) I want B1i to create 3 new documents - basically have 3 bius run from one triggerring event.
I've had a bit of a look around and haven't really found anything useful; is this easier than I am thinking or will there be some trick to it?
Thanks in advance,
njmog1

To be honest, I solved it in quite an ugly way..
First, I set it up so that B1i does not ignore the Events created when it creates a document (You can see more on that on page 9 of the guide 03. Extensibility)
Next I created a new transaction code in Business One journal entries called "B1i"
So basically I have 4 BIUs, the first one is triggered by an outgoing payment. and B1i creates a journal entry - and I set the memo to be something like "JE created by B1i Step 1".
For the second BIU, the filter is "Transaction Code equal to B1i and Memo = "JE Created by B1i Step 1" - this creates another JE, and I set its memo to be "JE created by B1i Step 2"
For the third BIU, the filter is "Transaction Code equal to B1i and Memo = "JE Created by B1i Step 2" - this creates another JE, and I set its memo to be "JE created by B1i Step 3"
etc. etc.
It's an ugly solution but I got it done quite quickly, If anyone has any suggestions to improve it, let me know! And if it's not clear to you, let me know what I need to clear up

Triggering events from event queue

Can anyone tell me if events triggered FROM the event queue execute immediatly before returning to the place where the trigger occured (as it seems to when I follow the code in the debugger).
for example in my code I am:
1) capturing a tab change event so I'm on the AWT event queue.
2) calling stopcellediting() on a table which eventually triggers a losefocus event on a control within the table.
3) the program flow seems to go straight to the focuslost event before returning to process the rest of tab change event.
is this behaviour reliable? or is it just a timing coincidence?
thanks in advance.

This behaviour is reliable.
All the code that executes these events is performed in the same thread, so it has no means to do something in parallel.
SwingUtilities.invokeLater method does provide an ability to postpone execution of some code but inside Swing package it is used mainly for paint related tasks (for example the painting of the focus change will most likely occur only after the rest of tab change event processing will be executed).

Alerts -triggering event

Hello All ,
i am working on Alerts .
can any body please tell me , what is " Triggering Event " ,how it is working ,can i get some detail explanation of this .
Thanks,
Aravind .

Hi Aravind,
Triggering Event means that you need in certain condition annonce that Event is happend. And then every one who "waiting" for this Event is happened starting to do their jobs. In Alert example when a confirmed BP is a "Golden Customer" you want to popup an alert to the user.
So what you need to do in your ALERT class when you check that you need to popup an alert you Triggering your Event and in customization when you created an alert you insert this alert as Triggered Event.
Create an Interface ZIF_CRM_IC_EVENTS_CON and add there Interface IF_CRM_IC_EVENTS_CON_BASE in your inerface add your Custom events on Attribute section. In customization you will see your Custom Events so you can choose it.
Good Luck
Eli Steklov
Please Reward Points if it Helped :-)

Regarding Workflow triggering event.

Hi,
Description: I have created a Object type and a event for the same by transaction SWO1, after that i have created a WorkFlow(WF) for which the triggering event is the event i have created in the Object Type. There is a report in which i have used the FM "SWE_EVENT_CREATE" and passed the Object Type, Event Name, Key field values and the creator.
Problem: When i am executing this report the FM is called and the sy-subrc after call is 0, stating that the call was succesfull, but the WF is not getting triggered when i went to transaction SWI2_FREQ to check this WF is not at all triggered. But when i tested from WF transaction SWDD it is working fine.
Could anyone please explain me on this. or is there any other way to use an event of a Object Type to trigger WF.
Thanks and Regards,
Raghavendra Goutham P.

hi gauthum,
try this chks.
Workflow Trace On/Off - SWU8
Display              - SWU9
Delete              - SWU10.
Work Item Analysis    - SWI1
Identifying workflow for the work Item :
Tx : SWI1 - Enter the workiem id which has been identified in workflow log
       The details consists of workflow of the workitem.
WorkFlow Errors :
1. Workflow Not Started           - Using Event Trace we can Identify
2. Started but No Proceeded           - Wrong Object Keys
3. Problem in Work Item Execution
     Dialog Work Item          - Agent Determinaion Error ( Position,Role,User )
                         - Role Resolution Error
                           Reqd Element would no be
                           Set in Binding
     Background Work Item      - Make Foreground and Test once Sucessfull make it Back round
rgds
nver
if hlped mark points

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Triggering event from for-each

Hi,
I have a process that takes long to execute, I want to be
able to send a progress notification to the user with the hope of
not getting him bored or impatient, for some reason I can't achieve
it and I don't know where to go for help, if you know how to solve
this, any help will be greatly appreciated.
I have some code like this:
<code in mxml for my application>
- component declared .. onXEvent="showProgress()"
- script for showProgress calls refresh for ProgressBar
Component
</code in mxml for my application>
<code for my component>
for each (var myObject:xObject in MyCollectionOfMyObjects)
// do some complex logic and calls methods for this item
// creates and triggers event for progress notification
</code for my component>
I would expect to see my ProgressBar advancing as the process
is completed, but for some reason the process seems to take control
of the execution and no onProgressEvent is fired until the foreach
finishes execution. It will run perfectly in the debugger (step by
step) but it doesn't work at runtime.
Is there any way I can achieve this in Flex?? Is there any
event class I can use to solve this issue?
maybe anyone has done this before or knows a link to more
information on this subject?
Thanks in advance
William Vega
MCSD / Beginner Flex Developer

Flash functions execute within a frame. They finish before
any UI rendering is done. You will have to use callLater , somehow,
within your loop to give the UI a chance to draw.. There is a more
detailed answer to this thread somewhere else.
Tracy

When we will go to triggering events programatically and when throgh tab?

Similar Messages

Maybe you are looking for