When we will use BPM?.

When we will use BPM in a scenario?.
Why we use BPM?.
If we can do same scenario without using BPM, is it better?.

HI,
Also see the below links to get more details regarding BPM
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Regards
Chilal

Similar Messages

When we will use HEADER MAPPINGS in RECEIVER AGREEMENTS?

Hi,
HEADER MAPPINGS appeared when we create RECEIVER AGREEMENTS,So when we will use this option.

Hi Ramana,
The header mapping is made available in the receiver agreement. It is required in the IDoc adapter, for example, because the IDoc adapter does not know any communication parties.
chk this link
http://help.sap.com/saphelp_nw04/helpdata/en/b2/1f17419b24f06fe10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Regrads
Sampath

Please tell me the cases when I will use Call transaction/ Batch Session.

Can you please tell me when I will use Call transaction or Batch Session in the time of uploading data through BDC.
Regards,
Subhasish

Hi subhasish,
1. One of the main criteria is
2. If error handling facility is required, then batch session is the best,
otherwise if we use call transaction, then error handling code,
has to be written in the program itself.
3. Batch session provides lot of facilities to the user.
regards,
amit m.

My question is when you will use the android OS? S...

my question is when you will use the android OS? Stop Symbian & Windows Please

ITs time to use Android OS for NOKIA Company because people now want expandable memory slot (Mirco SD card ) like Andriod Phone and I heard most windows phone does not support Micro SD card and Bluetooth for file transfer is that righti.e. Bluetooth is only there for listening songs not for file transfer)
In case of Symbian OS is actually good OS for low cost model means below 4000 Rs. mobile phones only not for smart phone
Symbian OS doesn't reach to the Android OS because even if Nokia try to do so.. but their prices are more than Android phone with same features and now if we compare Micromax Bolt A51 and new NOKIA ASHA 501 see the difference refer http://www.gsmarena.com/compare.php3?idPhone1=5428&idPhone2=5445 this link
HENCE WITH THIS CONCLUSION I WANT TO TELL NOKIA COMPANY THAT EITHER THEY REDUCE THE PRICE OF THERE SYMBIAN MOBLIE PHONES OR IT'S TIME TO SWITCH TO THE ANDROID OS DUE TO WINDOWS PHONES HAVE MORE DRAWBACKS THAN ANDROID OTHERWISE THERE IS NO FUTURE FOR NOKIA COMPANY TO RAISE AGAIN IN THE CURRENT MARKET
WISH YOU BEST OF LUCK NOKIA COMPANY FOR KEEP CONNECTING PEOPLES......I HOPE YOU CHANGE YOUR MIND...

Purchase Credit account - when it will use?

Hi All,
Just being confused with Purchase Credit Account, when this account will be used? It is at Goods Return function? or AP Credit Note?
What account should be set for? COGS? Looking forward for correct answer, thanks.
Regards,
MH

Hi,
Purchase Credit Account is an expense account to be used as default when a credit transaction for purchasing is created, for example, an A/P credit memo.
This account defaults for new warehouses, item groups and item master data records creation.
The purchase credit account can be the same as the Expense Account, in case you do not wish to record credits to a separate account.
It is mandatory account for Initial Setup.
Regards,
Preety Goel
SAP Business One Forums Team

Where put plugins when several will use iMovie?

I'm using iMovie HD and have a bunch of plug-ins located in user/Library/iMovie/Plug-ins.
Now another user on the same computer, using his own user account, is supposed to be able to use iMovie WITH the plug-ins. I have tried copying the plugs to the same location on his account and also the folder user/Library/iMovie the main library at HD/Library. None of these solutions work.
So, how can I make the other user be able to make use of the plug-ins?

I have tried copying the plugs to the same location on his account
That should have worked.
Maybe it's a permissions error? Does he have read/write permission to the plug-in files when logged in as "himself"?

When we will go for BPM

Hi,
I want to know when exactly we go for bpm and how to work simple bpm scenario.

Hi Sreenu,
BPM is used for Stateful communications,suppose u have to delay message processing,or wait for other messages to arrive and then semd them all together,in that case use BPM.
We will use BPM when ever we want to do the following:
1.Controling or Monitoring of messages in XI
2. Collect or Merge the messages in XI
3. Split the messages in XI
4. Multicast a Message
5. Need to send an Alert
6. Transformation
With its BPM capability, SAP NetWeaver:
Exploits business-process efficiency by giving your business
users the ability to directly model, manage, monitor, and
analyze business processes
Enables continuous process improvement and the dynamic
modification of business processes
Extends the value of your companys core business investment
and maximizes the return on its strategic assets by providing
the ability to change process rules without additional IT
investment
Provides greater visibility into critical business operations for
better decision making by delivering the right information at
the right time
Allows the integration of people, applications, and internal
and external resources
Process step types:
Message relevant:
Receive: We use it to receive a message. By receiving a message we are sending the data into process. We can use it to start a process. We can use it for activating or using correlations.
Send: We use it to send either an asynchronous or synchronous message or an acknowledgement.
Receiver Determination: We use it to get a list of receivers for sub sequent send step. It calls the receiver determination that we configured in the integration directory and returns receivers list.
Transformation: We use it to change a message inside the process. E.g. bundling multiple messages into 1 or splits a message into multiple.
Using this we can create N:1 or 1:N or 1:1 transformations. In general scenario 1:N transformation is possible.
Process flow control Relevant:
Container: We use it to set a value for target container element at runtime. Target container element and assigned value must have same value.
Control: We use it to terminate the current process and to trigger an exception and to trigger an alert.
While Loop: To repeat the execution of steps within the loop.
Fork: We use it when you want to continue a process in branches that are independent of each other. E.g. to communicate with two systems that are independent to each other
Block: We use it to combine steps that you want to execute one after the other and which are to access the local data.
Empty: It has no influence on the process flow. We use it as a place holder for a step that has not yet been defined, and as a step with no functions for test purposes.
Wait: We use it to incorporate a delay in the process.
Switch: We use it to define different processing branches for a process
T.Codes for B.P.M:
SXMB_MONI_BPE
SXWF_XI_SW11
For Example a Small Explanation reg BPM for this Req we used BPM
A background program should be scheduled to run every 10 minutes to analyse any material records that have been created or changed or deleted that have occurred to the material master records in the last minute.
There are two Message Mappings involved in the whole scenario. First mapping is N:1 Mapping which will be used in BPM and second Mapping is 1:1 Mapping:
1. First Message Mapping  N: 1 u2013 Mapping between IDoc (occurrence u2013 0...unbounded in u201CMessagesu201D tab) to IDoc with changed occurrence of its top node (IDOC) as 0...unbounded. This message mapping will be used in BPM u2013 transformation step.
Description: This BPM collects all Idocs for 10 minutes which are of Message Type (ZMATMAS05) according to Receiver Partner Number (Field u2013 RCVPRN) and calls N: 1 mapping to bundle the collected Idocs in a One External Definition for that IDOC.
Use
You use a wait step ( ) to incorporate a delay in a process. Usually, you use a delay to define when the next step in the process is to start. You can define a delay as either a point in time or a period of time.
At runtime, the step waits until the specified point in time is reached or the specified period of time has passed. The system then continues the process by proceeding with the next step.
Expalined clearly how to do a file to file scenario with BPM :
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
it is File>RFC>File using BPM then refer this blog.
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
BPM-1 /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
BPM-2 /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
BPM-3 /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
BPM-4 /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
Integratio Scenario
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
Schedule BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
Use of Synch - Asynch bridge in ccBPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
without BPM1
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
IDOC BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
To deal with Multiple sender and receivers based on the conditions we could use BPM. Its one of the feature of BPM, but its not mandatory to go for BPM for each n every case. Its depends upon scnenario.
/people/marilyn.pratt/blog/2007/10/12/clubhouse-las-vegas-a-bpm-roadmap
BPM Process Patterns:Repeatable Design for BPM Process Models
http://www.bptrends.com/publicationfiles/05%2D06%2DWP%2DBPMProcessPatterns%2DAtwood1%2Epdf
BPM Steps link : http://help.sap.com/search/highlightContent.jsp
BPM-BUSINEES PROCESS MANAGAEMENT
*Transformation Error and still stuck ? *
/people/shabarish.vijayakumar/blog/2005/12/07/transformation-error-and-still-stuck
Walkthrough with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
Reconciliation of Messages in BPM
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Reconciliation of Messages in BPM Contd. - Restart Workflow
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm-contd--restart-workflow
*XI: How to... retrieve MESSAGE_ID from a BPM *
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
XI: Do you realy enjoy clicking and waiting while tracing BPM steps?
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps * *
BPM:Single Sender and Multiple Receivers based on synchronous exchange(switch) part-1
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
Collecting IDocs without using BPM
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm * *
*Multi-Mapping without BPM - Yes, itu2019s possible! *
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Sync/Async scenarios without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
XI/PI: BPM modeling in Aris for SAP Netweaver - a teaser
/people/michal.krawczyk2/blog/2006/11/27/xipi-bpm-modeling-in-aris-for-sap-netweaver--a-teaser
*XI: who said he cannot be stopped? BPM JIM - SP17 *
/people/michal.krawczyk2/blog/2006/06/27/xi-who-said-he-cannot-be-stopped-bpm-jim--sp17
*Schedule Your BPM *
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm * *
*how to integrate unified worklist to xi-BPM *
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb9100f8-0c01-0010-ac8e-e017351f3fc1
*Usage of Sync-Async when both Sender and Receiver are Synchronous Apps *
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Using a BPM to collect messages for a set interval of time
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Sync/Async scenarios without BPM
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm * *
*Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure *
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards,
Vinod.

What is the real use of party ? When we will go for Parties?

Hi All
   what is party ? Why?
   when we will use this parties(ID)? where the real adv..lies ?
Pl...explain this one detail so that i can decide we will go for party or not?
regards
Rakesh

Hi Shabarish
         Thanks a lot ...it is really helpful...
       But thing is i am not getting the real use of it ...!!!
       before posting this question,i have gone through sdn but thing is where it is
       helpful to implement
       Try to provide some more information on this
Regards
rakesh

Message split using BPM.

Hi SDNers,
     My Scenario - Multiple IDocs to 3 output messages. Mesg1 1:1, Msg2 0:1, Msg3 0:1
     We are using BPM to acheive this.
           I am doing message split using BPM. But I have a problem when I am using BPM.
     My requirement is to collect the Idocs for 1 minute, this I acheived by using deadline branch and collecting idocs using container. After that I used Transformation step to run interface mapping by which message is splitting into three messages. Upto this I acheived successfully, then after I got strucked to split the message.
     I am using fork step and and giving three branches, in each branch I am giving receive step and collecting the transformed message. My problem is the message in the first branch is mandatory to come, where as the messages in the remaining two branches are not mandatory. That is my message can split into three messages or just one.
     If I use fork step, without getting the message in all the three branches, the messages in the branches will not come out. Which is not satisfying my requirement.
     I am thinking that before receive step in fork, can I use wait step for 1 minute or can anybody explain what is the functionality of necessary branches.
     Thanks in Advance.
Regards,
Jayaram.G

Jayaram.G,
To send the messages in your fork, you need a send step instead of a receive step.
I think you also need to insert a switch in al of the fork's branches, so that the messages will ony be sent when the transformation produced the message. (use the expression [message] EX in the switch).
Kind regards,
Koen

How to use BPM's in File 2 File Scenerio

Hi All,
Please do let me know when do we use BPM's in File2File scenerio and also let me know the example for the same.
Thanks
Sudharshan

Hey,
   BPM generally is not required in a file to file scenario.
   And as far as possible avoid the use of BPM.
In most of the file to file scenario BPM is not required.
But in certain scenario(file to file) it is required.
for example N:1 mapping.
that is when you have two sender and one reciever.
in this case it is mandatory to use bpm.
because during configuration it is not possible to give two senders in your interface determination.
hence if you use a BPM interface mapping will be referred in your BPM and there is no need for maaping to be reffered in Interface determination.
In order to design a BPM for this scenario
steps.
1) create a data tyoe and message type for sender and reciver file structure.
2) do the required mapping.
3) create abstract asynch interface for the two message types.(as bpm requires abstract type)
4) create a BPM.
5) create two container type variables fr the two abstract interface(you cannot refer to the abstract interface directly)
6) assign a recieve step of type async a in this step select the container variable created corresponding to the sender abstract interface .
7) assign a transformation step and refer to the interface mapping in it.
8) assign a send step and select the container variable created corresponding to the reciever abstract interface .
your BPM is configured.
reward points if useful.
regards,
       Milan

Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

I follow this blog to the letter - because it is the same as my scenario:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

Hi Lynn!!
Check this SAP help for certain requirements when to use BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
Take a look at this blog by Michal,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
Check this weblog for a step by step procedure:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
or case study go thru this blog:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
for checklist:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
Thanks !!
Pls reward if useful

What is Cache refreshing in XI ? Why and when we will do that ?

Hi Experts
    What is Cache refreshing in XI ? Why we need to do this ? when and all we
    need to do that ?
    T.Code: sxi_cache   when we will use this ?
    I have no idea on this and any one give more details on this pl....
Adv..thanx and points to all
Kiran LVS

Hi ,
There are 2 types of caches.....
CPA cache - is your Collaboration profile agreement cache, ie to mean it will contains the cache copy of all objects created during configuration time (ID).CPA (Collaboration profile agreement )Cache-mainly for J2EE engine/Adapter engine.
About Cache Monitoring-
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/2fd93f130f9115e10000000a155106/content.htm
Runtime cache - it will contain cache copies of all the objects in XI (IR/ID)
and active version of all your objects during runtime.
Check this.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Sekhar

How do I use my redeemed gift card to purchase a book on iBooks when it will only give the option of "Mastercard, Visa, Amex or 'None' (Billing Address)"??

How do I use my redeemed gift card to purchase a book on iBooks when it will only give the option of "Mastercard, Visa, Amex or 'None' (Billing Address)"??
Desperately need help so I can purchase books for my study course!!

Sir,
I thought So too but then I went to Itunes Library and try and buy a single song from an album for $1.29. Now my Itunes Gift card balance is $ 7.10 as I mentioned earlier. it still did not let me buy and kept trying billing my Visa card.
Should I restart my PC and Itunes and retry. What do you suggest?
regards
Bikram Suri
[email protected]

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

When we will use BPM?.

Similar Messages

Maybe you are looking for