When will Apple resolve its issue with Adobe so iPad users can use flash?

When will Apple resolve its issue with Adobe so iPad users can access flash?

That isn't going to happen. Adobe has not only given up on iOS, they have given up on all mobile device now.
Why do you think you need Flash?
Allan

Similar Messages

  • When will Apple resolve burning issues?

    Many pages on this board show issues with iTunes failing to burn CDs. Numerous makes and models and operating systems are involved. Error messages, failure to complete the burning process with no error, etc.
    We can all run our diagnostics, change settings, update firmware, as many of us have done with no success.
    Will the folks at Apple give us a fix?
    This is obviously an inherent problem since most of us can burn CDs in other programs and formats.
    My issue - iTunes just stops after initiating the process. It checks the playlist and then nothing.
    This began two updates ago during the 7 series update I believe.
    Settings are OK. HP has been contacted. Everthing is OK on my end.
    Where are you Apple?

    I was able to get my computer to run diagnostics on my CD drive. Oddly enough I opened the task manager window and ran diagnostics returning the following output:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 RC647AA-ABA m7680n
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: incdrm (4.0.0.16), GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce 7300 LE
    Connected Device Information:
    DiskDrive, SAMSUNG SP2504C, Bus Type ATA, Bus Address [0,0]
    DiskDrive, SAMSUNG SP2504C, Bus Type ATA, Bus Address [1,0]
    DiskDrive, Generic USB CF Reader USB Device, Bus Type USB
    DiskDrive, Generic USB MS Reader USB Device, Bus Type USB
    DiskDrive, Generic USB SD Reader USB Device, Bus Type USB
    DiskDrive, Generic USB SM Reader USB Device, Bus Type USB
    CDROM, SATA-DVD DROM6316, Bus Type ATAPI, Bus Address [3,0]
    CDROM, TSSTcorp CD/DVDW TS-H653L, Bus Type ATAPI, Bus Address [2,0]
    CDROM, Memorex 52MAXX 3252AJ1 USB Device, Bus Type USB
    Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
    F: TSSTcorp CD/DVDW TS-H653L, Rev 0414
    Drive is empty.
    G: SATA-DVD DROM6316, Rev HP02
    Audio CD in drive.
    Found 8 songs on CD, playing time 34:30 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 02:51:20
    Track 3, start time 07:13:15
    Track 4, start time 11:38:55
    Track 5, start time 16:59:02
    Track 6, start time 21:17:10
    Track 7, start time 27:07:26
    Track 8, start time 30:59:58
    Audio CD reading succeeded.
    Get drive speed succeeded.
    L: Memorex 52MAXX 3252AJ1, Rev 4WS2
    Drive is empty.
    Please provide any available information.

  • When will apple release an update with bug fixes for ios 6?

    when will apple release an update with bug fixes for ios 6?

    When indeed. I purchased iPhone 5 64gb and have so far experienced the following issues/Bugs
    1. Flash on camera out of sync
    2. Cannot connect to some WIFI Bluetooth drvices
    3. Missing Album Artwork on iTunes album view
    4. Buggy and confused maps/satnav
    5. iMessage comes and goes
    6. Battery Life *****

  • When will Apple support h.264 with HE-AAC v2 (in AppleTV/Ipad) ?

    Hello
    When will Apple support h.264 with HE-AAC v2 (in AppleTV/Ipad) ?

    Maybe because iPad2 has a faster processor

  • When will apple have its next event?

    When will apple be hosting its next event?

    We are just fellow users here just like you. Therefore, if it hasnt been announced yet, we don't know about it.

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • When will Apple resolve the FCPX Crashes when Effects are added to a clip in timeline.

    I have tried every route to get answers from Apple regarding system crashes when applying an Effect to a clip in the timeline. I am now getting more aware from posts in all sorts of Forum / Communities that this is causing VERY MANY users a problem.
    It would only take 30 seconds for Apple to post a statement to let their users know what they intend or are doing to resolve together with an estimated fix time.
    Come on Apple please SAY something at least.
    F. Jackson

    Here we go - I have another thread that I started the other day, but thought I'd continue this here. I just did an extensive test. Fred, you may be on to something here. I'm beginning to think some of this is only happening if you are:
    (a) running the Trial version
    (b) Motion is NOT installed
    (c) and it may be that the 10.0.1 update has created this problem, although surely Tom and Andy are running that update...
    ...or some combination of the above. Anyway...
    New iMac i5 quad-core 12mb RAM - new machine with total stock config - only Apple software except for Office 2011.
    FCP X Trial version, Motion is not installed
    I've tried a variety of clips, but to eliminate variables, for this test I just used clips from a Canon 60D. They were imported from the card and converted to ProRes by FCP X.
    Again, these crashes only relate to using the Inspector with certain Effects. If the Inspector is closed, I can apply these Effects and they play back flawlessly. However, once I've applied them and selected the clip, clicking the Inspector button causes an immediate Quit of FCP. And, if the Inspector is already open, just applying the Effect to any clip causes an immediate Quit.
    These are the Effects that cause the crash (for me) by category:
    Blur - Radial, Zoom
    Distortion - Earthquake, Fisheye, Fun House, Glass Block, Mirror, Scrape, Water Pane
    Keying - Image Mask
    Lighting - Highlights, Side Lights, Spot
    Looks - amazingly enough, all work except for Glory
    Stylize - Censor, Halftone, Line Screen, Photo Recall, Pixellate, Vignette
    Tiling - Kaleidoscope, Kaleidotile, Perspective Tile (but strangely just plain "Tile" DOES work)
    So, this is approximately half of the supplied Effects. Interestingly, there is not a single category in which ALL of them work, nor one in which NONE of them work. And, by the way, doing this gave me a chance to check out every Effect - wow are there some cool ones I can't wait to work with. And, I got into this routine of highlight clip, make sure Inspector was open, double-click Effect, if no crash just CMD-z and repeat. I threw a lot of changes at it in quick succession and it handled it beautifully, except for the list above.
    There is also a third party free effect from Alex4D called Smooth Move. It looks fantastic! It allows Ken Burns-like scaling which somewhat alleviates the weird animation that results if you scale and move at the same time with keyframes, BUT it allows the flexibility to NOT have the move span the entire clip like Ken Burns does. Oops, sorry, that Effect ALSO crashes the Inspector, so I can't access the controls. And, to keep this test pristine, I didn't try the Alex4D Effect on this test iMac, just on my Mac Pro on a clean system install.
    Now, if Apple said (or says later) oh, wait, in the Trial version some of the Effects are not adjustable, but they are flawless in the paid version, I'd be fine with that. And, if you guys with the paid version and/or Motion installed say it works fine for you, I believe you :-). It's just that several of us were excited to get the Trial. I've been using FCP since 2003 and LOVE this new version. But, until you figure out that you can't use the Inspector with half of the Effects if you are using the Trial version, it just seems like the thing is unusable and crashes constantly - because it does.
    Now that I know this, I don't think I've had a SINGLE crash otherwise - even on my "wrong" install on my MacPro with FCP7 and FCPX both on the boot drive.
    David

  • When will Apple fix CS5 issues?

    So... my newly acquired CS5 set-up (Macbook Pro mid-2009, 8GB RAM) has been crashing like a hijacked plane ever since Apple gave us the wonderful 10.6.4 update.  Adobe even have a support document to this effect: http://kb2.adobe.com/cps/854/cpsid_85423.html
    Which is basically a giant shrug of the shoulders.
    Now, is it just me or is this one giant joke that such an expensive combination of software and hardware would be completely unusable?

    posting your video card info would be helpful -- there are some known issues with certain cards that are causing these problems
    i recall it is the nvidia cards that have the problem i am referring to
    apple is aware of the problem

  • When will RIM resolve this issue!

    I have clients running into issues with the Desktop Manager app crashing or not responding after it processes the calendar sync.  RIM has this documented in their knowledge-base document KB17701 but they still have not fixed the issue.  Its been posted since December 2009! Get this fixed already!
    FAIL

    Yep, I was just curious how the workaround did for you.
    Maybe they'll get around to the solution after hockey season.
    Thanks.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When is Apple going to make Mainstage available to iPad users ?

    I'm a drummer and music producer, and I would love to see Apple make Mainstage 2 available for the iPad. Why haven't you guys done this yet ?

    These are user-to-user forums and are not monitored by Apple - and nobody here knows what Apple's plans are. If you want to leave feedback for them then you can do so here : http://www.apple.com/feedback/ipad.html

  • When will Apple resolve the lost album artwork saga for Mac/Windows Users?

    Hello,
    I'm running Windows XP, although this problem appears to be both OS- and platform-independent. I've read several forums within and outside the Apple Support site that describe issues around lost album artwork.
    In a nutshell, iTunes loses artwork that was manually obtained/added (and also iTunes-downloaded). I know I can right-click lost albums for downloaded music, but this is annoying because I have thousands of albums (or single songs from albums) and I don't want to constantly reload the information. It's even more aggravating because a large portion of my music collection consists of rare albums, and it's not unusual for me to spend significant time finding a single cover.
    I've tried some tips described in the forums, but it really comes down to users asking: Can Apple please acknowledge that this is a broad v8.x.x issue and commit to resolving it in an official release?
    Artwork coverflow-style viewing is a huge part of the music experience to me. I LOVE iTunes, but not if using it means that I'll constantly be frustrated and worried about data loss. I'm loyal to iTunes and don't want to leave, but I'm already looking at other players.
    Apple - We're begging you. Can you please fix this?
    Thanks
    -B

    Hello ! This is a user chat board - you can provide feedback to Apple via itunes menu > Help > Provide iTunes Feedback.
    My artwork doesn't get lost, so I wonder what is different on your PC? I've embedded the artwork in the MP3 tags, and they are ID3 v2.3.
    You might check your Windows Media Player settings. The default settings get info from the internet and can change things without you ever 'running' WMP. Then the next time you look at a file in iTunes, it is changed - so it seems iTunes did it.
    It's in 3 places in WMP - general, privacy, and library tabs.
    If you are talking about itunes store downloaded artwork going missing, that's a different matter. I think not, since you mentioned rare albums - presumably not sold in iTS, so therefore not downloaded from iTS.

  • When will firefox 4 be compatible with adobe acrobat x pro?

    I am missing the convert icon from Adobe Acrobat X Pro when I upgrade to Firefox 4, so I had to go back to the earlier version of Firefox.

    You will need to ask Adobe about this, they will need to update their add-on to make it work.

  • When will Apple solve battery issues, this is crazy! MB Air instead of up to 8 hours of battery life, 4:32 on average!

    Apple really needs to fix the battery life problem or come with a downgrade option to 10.7 and refund our expenses for buying 10.8 !!!!!!

    rvdwal wrote:
    Apple really needs to fix the battery life problem or come with a downgrade option to 10.7 and refund our expenses for buying 10.8 !!!!!!
    http://www.apple.com/feedback/macosx.html
    Also go to right of page and read other posts under 'More Like This' and see if there are any suggestions in there for you that may have worked for others.
    Cheers
    Pete

  • When will Apple fix the problem with Freezing from the new upgrade??

    I've had it.
    Everytime I try to burn or back up my iTunes songs the whole program locks up as soon as I click on any of the brun or back up icons. Haven't been able to find any answers to solve my problem here although Apples tech support insists on looking here. Come on Apple what gives??

    No one here would know that. An announcement would need to come from Apple.

  • When will Apple begin taking preorders for the new iPads?

    Apple said - and many websites reported - that they would begin taking "pre-orders" for the new iPads beginning on 10/17 (many said starting at 12:01 am).  Well, it's now after 12:01 am on 10/17, in the US Pacific Time Zone, yet it appears (to me at least) that one can not place an order yet.
    When exactly are they supposed to begin? 

    Hi ..
    Not sure what other websites are reporting time wise but orders usually don't start until 10am Pacific Daylight Time on the date pre orders become available.
    It's currently 12:20am in Cupertino, California;  Apple's headquarters.
    Pricing & Availability
    iPad Air 2 and iPad mini 3 come in three gorgeous metallic finishes including gold, silver and space gray, and customers in 29 countries and territories can order online beginning Friday, October 17. Both iPads will be available starting later next week in the US, Australia, Austria, Belgium, Bulgaria, Canada, China (Wi-Fi models only), Czech Republic, Denmark, Finland, France, Germany, Hong Kong, Iceland, Ireland, Italy, Japan, Liechtenstein, Luxembourg, Macau (Wi-Fi models only), Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovakia, Spain, Sweden, Switzerland and the UK. Availability in Croatia, Greece, Puerto Rico, Russia, Turkey, United Arab Emirates and elsewhere around the world, will continue through the end of October with additional global availability in the coming months. iPads are sold through the Apple Online Store (www.apple.com), Apple’s retail stores and through AT&T, Sprint, T-Mobile, Verizon Wireless, additional carriers and select Apple Authorized Resellers.
    From here >  https://www.apple.com/pr/library/2014/10/16Apple-Introduces-iPad-Air-2-The-Thinn est-Most-Powerful-iPad-Ever.html

Maybe you are looking for

  • Call RFC (Abap) with Javascript

    Hi all, i'm new to Javascript. Now i have to write a small piece of code in Javascript that calls an Abap RFC. Does anyone have an example for something like that ? Greetings Henning

  • GL open items report needs OSS Note

    Hi All, Report S_alr_87012282 is run at period end and year end to validate that A/P 21010000 is in balance against the open items report. For the 7th period (12/13/08) I could not run the report as it timed out. If you run this in the background the

  • ODI login

    hi When i try to login with user details and tried to test the connection it say succesfull but when i come back to securrity repository connection and press ok it dont go in neither it gives error messgae what should be done any suggestions?

  • Installationsprobleme bei Flash Player 9.0

    Bei einem Rechner schaffe ich es nicht den Flash Player zu installieren. Dieser Rechner l�uft unter Windows 2000 Professional in einer Domain. Wenn ich mich als Administrator innerhalb der Domain anmelde oder wenn ich lokal als Administrator angemeld

  • PE 3 for Mac

    I have been using PE 3 for many years with delightful success. All of the sudden, my PE program crashes,a and CANNOT be restarted successfully. I hae tried to reinstall the program with no success. Please can anyone help me as I have an important job