When will Lightroom be updated with camera raw 8.7?

Hi Folks,
Can anyone tell me when LR will be updated with camera raw 8.7, containing support for the new Nikon D750 camera?
Many thanks for any feedback

Until you convert to DNG you wont be able to import the 750 NEFs into Lightroom.
As I am a Windows user I'm not sure what you mean about Command R but to use the DNG convertor you need to download from the link and install it.
Then you start up the convertor as a separate application and you will see the following panel:
Then choose the Images to Convert
Select a location to save the converted images (defaults to the same location as the input images)
Rename the images if you so wish (Default is just to creat a file of the same name with DNG extension)
Then Convert and after the conversion you will be able to import the DNG files into Lightroom 5.6
Then it doesn't matter if you have Camera RAW 8.7 in CS6 as they will open directly from LR to CS6 as you would normally do.
I guess it is a little inconvenient because you have an additional step to convert the NEF to DNG but it at least get you there in the meantime while you are waiting for the final LR product.
Enjoy!

Similar Messages

When will Lightroom be updated to accommodate Canon 6d RAW files?

When will Lightroom be updated to accommodate Canon 6d RAW files?

Its not supported in the Latest version of Lightroom 4.3 Release Candidate or ACR 7.3 RC which expires at the end of Jan 2013 I believe.
Since the 6D is a high end and likely a popular camera model it is my expectiation that it will be supported when the final release of LR 4.3 / ACR7.3 is issued.
I do not know just my opinion.

Anyone knows when will Lightroom be able to open Raw files from the new Nikon D810? Thanks.

Anyone knows when will Lightroom be able to open Raw files from the new Nikon D810 camera? Thanks.

Just posted to Lightroom Journal Lightroom Journal | Tips and advice straight from the Lightroom team. It's not Lightroom, but does address the original question. Definitely worth a look, sooner rather than later.
Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
I expect Lightroom will follow in due course, but have not ETA

Problems with Nikon Coolpix P7700 and Lightroom 4.4 with camera raw 7.4.

When I import raw (NRW) files (size 3000 x 4000 pixels) from my Nikon Coolpix P7700 to Lightroom 4.4 (camera raw 7.4) it seems that Lightroom doubles file sizes. In Metadata section I can see that picture´s file size is 25.xx Mb. Camera´s sensor size is, however, only 12 Mb. I have also Nikon D300 and imported raw files (size 3000 x 4000 pixels) in Lightroom 4.4. are varying between 12.xx and 16.xx Mb. I´m very confused about the situation. I have iMac 27" (late 2007) and operating system is Mac OSX 10.8.4. Can somebody explain what is happening. Is there a bug in Lightroom 4.4 and Camera Raw 7.4 or what?
Thank you in advance
Eero

You are mixing megapixels (your camera takes 12 megapixel photos) with megabytes (the file size). These two different units cannot be compared, and I conclude from the numbers you have provided that nothing is wrong.

I keep getting an install failure when I attempt to update to Camera Raw (6.7)

When I try to install the listed Camera Raw update 6.7 (for CS5), it downloads and appears to go through the instll process, but then shows a failure to install message. Is suggests you try again (fails every time) and te suggests you contact support. I need this update as my new camera is only supported in this update, and otherwise PhotoShop will not load Raw files shot with that camera. Anyone have any suggestions? THanks.

BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When will Lightroom become compatible with the Nikon D750?

Lightroom 5 will not open .nef pictures from my Nikon D750, is there an update coming soon?

Yes, there will be an update. But there is no announced date. There is a release candidate DNG converter 8.7 you can use in the meantime to create DNG copies that you can use in Lightroom right now. When the update is finally released you can switch to your NEF files.

When will Lightroom recognize Nikon D750?

When will Lightroom be updated to recognize the new Nikon D750 camera?

Hi Rob,
Yes this is just a hack. Not a recommended long term solution.
I'm sure Adobe will come out with an update soon.
I am currently shooting raw and jpg.
Best to backup your original files just in case something goes wrong.
I have not had anything strange happen yet. But who knows.
Because its a raw image.. you are adjusting white balance, sharpness, contrast, etc. anyways.
The Nikon d810 was released July 17, 2014
Adobe released Camera Raw 8.6 with support for D810 on July 28th.
Lets hope the turn around for the d750 is the same.

Help render the raw files edited with camera raw how?

Hi
i have a problem
i use bridge cs5 (updated) to browse my raw files
often i open my raw files with camera raw inside bridge cs5 and make some corrections like exposure , saturation , contrast and so on
but after bridge doesn't re-render the files
i mean the thumbs ,previews , the slideshow still are in default setting
when i click and open with camera raw inside bridge or with photoshop cs5 ,the raw files look with corretions
but again bridge show me not with the corrections
i run under w7 32bit
what could be the problem?
thanks

mantralightroom wrote:
i see previews and thumbs with the edits but with a big delay
thanks
If you are using HQ On Demand you will get fast thumbnails, but there will be a delay in generating the preview as Bridge builds it.
The Always HQ takes more space, but faster as the data is already in cache.
Hope this helps.

When will Adobe issue an update to Camera Raw to include the Olympus E-M 5 MARK II camera?

When will Adobe issue an update to Camera Raw for CS6 and Lightroom 5 to include the Olympus E-M 5 MARK II camera, does anyone know?

What I wonder is when folks will start researching their favorite software BEFORE buying a new camera model?
I have never seen a cart pulling a horse!!
We know the our software, we know the new camera will be 'ahead' of updates. its the time between that we all seem to just accept. We should not.
We can go round in circles pointing fingers as to who is to 'blame', thats not the point. The point is, no matter how far you go back, since the advent of digital this has been a problem. Posting on all web sites as far back as I remember contain "when will there be RAW support for xyz?". There are even some on this site back in 2006 asking the same question.
The interdependent link between camera makers & software vendors is not working properly. They need each other yet don't support each other. Do you think Adobe thought up DNG just as a exercise? From memory it was an attempt to standardize, with an open code, a raw format that was universal. I blame Canikon for not wholeheartedly supporting it. Then the Oly, Panny alliance come along with MFT, an ideal opportunity, but proprietary issues prevail as if they got some sort of advantage from it. They don't IMO.
Sorry for the rant, got carried away! Its just so frustrating.

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
Operating System OSx Yosemite IMac.

What exactly does "not recognise" mean, Kathy?
You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

We'll know when it happens, Lucht - software companies don't make support promises in advance.

When will Lightroom 5 be updated to support tethered capture with the Nikon D5300?

When will Lightroom 5 be updated to support tethered capture with the Nikon D5300?

Nobody who knows is able to say, and Adobe doesn't pre-announce support.

Pentax K-x calibration with Camera Raw 3.1, and calibration updates

The Pentax K-x will save its raw files in either DNG (Adobe) format, or PEF (Pentax) format. Until Camera Raw 3.1 was released, I had my K-x writing DNG files, since there was no support in Apperture for PEF files. With Camera Raw 3.1, the K-x is now explicitly included, so that I could switch to PEF format.
My initial sense after doing that was that the PEF files were coming in darker than the DNG files had. But when I switched back to DNG, those were darker than I thought they should be, too. Since I had DNG files that had been processed with Camera Raw 3.0, I went back and made new versions, processing those with Camera Raw 3.1. Those, too, were much darker than the same files processed with the earlier raw developer. For examples, this picture is from a K-x DNG master processed with Camera Raw 3.0, while this picture is from the same master, reprocessed with Camera Raw 3.1. I've embedded the histograms shown in the inspector in each. Each of those has no adjustments applied. The JPEG image produced in camera (I shoot Raw+JPEG) is much closer to the brighter 3.0 image than the darker 3.1 image.
I've seen one other report of similar behaviour with K-x images in here, but that took the approach that the solution was to revert to Camera Raw 3.0, for now, at least. I hate to move backward, particularly if it locks me out of any future updates. So, does Apple have a history of recalibrating cameras that they've already released Raw support for? Might this change in a future Camera Raw update, or is this likely to be what they alway render for the K-x?
I can get the new style images looking okay (in fact, they seem to have better noise characteristics) with a good deal of adjustment, but not if I confine my adjustments to the Raw Processing brick. There, Boost and Hue Boost are both maxxed out by default, already. If I add adjustments in the exposure brick, and maybe a few others, I can probably get a general set of adjustments that will work as a default for this camera, but how common is it to have to do that?

Aperture 3 mostly seems to work fine for me, at the moment. There were some issues with importing my iPhoto Library that I've mostly worked out, and some quirks that were fixed by the 3.0.1 update. I'm not saying it's all better, but it's not the doom that one might imagine reading some of the threads here, either.
I only had the trial version of Aperture 2, though. I only got the K-x in late December, and before that, I had no need for raw processing. The software Pentax supplies is UGLY, though, and iPhoto wasn't cutting it, so I tried the Aperture 2 trial and the Lightroom 3 beta. I concluded that I much preferred Aperture to Lightroom, but I wasn't going to buy Aperture 2 when all the speculation was that Aperture 3 was right around the corner, or not coming at all. Since my Aperture 2 trial had run out, it wasn't a hard choice to buy Aperture 3 as soon as it came out. I do find I use the editing brushes more than I imagined I would, and I'm very happy that it now directly supports my camera - I've switched to shooting PEF raw instead of DNG raw.

Bridge CS4 will not update to Camera Raw 5.7 on one of my computers.

Bridge (CS4) will properly display my Nikon NEFs (from my Nikon D3 & D3S) on my old Mac Pro (Lion 10.75) but only the NEFs from the D3 are displayed on the exact same program on my MacBook Pro Retina - Mavericks).
I have followed Adobe's instructions perfectly, over and over again, but no matter what I try (and I did try some variations) I cannot update from Camera RAW Preferences.Version 5.0.0.178 on the MacBookPro Retina.
The Camera RAW preferences Version on the older Mac Pro computer's identical copy of Bridge CS4 is Version 5.7.0.213.
I tried opening and installing a download of Camera_Raw_5_7.dmg from Adobe and I also tried dropping in the Camera Raw plugin file from the older computer but nothing works. I have emptied the cache several times.
I dont know if this is significant but when I first started trying to do this, I could not find the Plug-Ins folder in the Adobe file on the MacBook Pro Retina, so I copied the one from the Mac Pro's Adobe folder.
Please help. I can only use Bridge on my older desktop computer because of this problem.
Thank you.
Jan

Well, Jan, over the years I've helped many Mac users with this precise problem, and I even posted screen shots showing the path to the correct plug-in folder for ACR. However, in your case all those images won't help and I won't be able to generate new ones for you for one simple reason: I do not use Mavericks and never will because my Mac Pro desktops cannot go above Lion, FORTUNATELY. Mavericks is still cr@p at this point.
All I can do is try to clarify a few misconceptions for you:
AutoMatters wrote:
…I read that about the root level library when I first tried to follow the instructions from Adobe and I thought that I was doing exactly that. Instead of the library associated with my name, I found the library associated with my hard drive. I suspect that I have not yet even seen the root level library…
Jan, that is the ROOT LEVEL Library.
Getting back to your advice, I do not understand what you mean by mounting the .dmg file as if it were a DVD or external hard drive.
I mean just that. A Disk Image file (.dmg) is a virtual disk, like a virtual DVD. You double click on that file in the Finder and it will then mount just as if you had inserted a DVD into your computer. It will then show you the contents it carries. I will not be at my computers for a few weeks, so I can't be sure about all that the Disk Image for that update shows; but somewhere in there will be the ACR Plug-in. That's what you need to copy from the Disk Image to your hard drive and install it in its correct location, NOT THE BLOODY .dmg file, for goodness sakes!
Do you understand that once you are at the ROOT LEVEL Library you DO NOT go to the Plug-ins folder therein? Read the instructions again. What you want is to continue the path through the Application Support folder /Adobe / Plug-ins / etc.
This old screen shot may help. Command or Control-Click on the thumbnail to see the full image in a new window, then scroll horizontally; it is a VERY wide image:
Also, if I delete the Plug-ins folder that I copied from my other computer's installation of Bridge CS4. Should I reinstall the entire CS4 suite from the original disks and start all over again. If so, I read somewhere that I will need to somehow deactivate my serial number from the products as installed on my MacBook Pro so that I may reinstall it.
Delete anything you may have copied yourself only if you are 100% sure what that is. But DO NOT REINSTALL ANYTHING without first uninstalling using the Adobe UNINSTALLER that was installed in your Utilities folder inside your Applications folder.
Whatever possessed you to go around copying folders from a different Mac OS version? ??? That is insane! Geez…
Why the heck do you keep talking about Bridge? ??? !!! Bridge has absolutely NOTHING to do with the installation of ACR. NOTHING!
ACR is installed at the OS level and can be hosted indistinctly by Photoshop or by Bridge from the same location.
Bridge is totally out of the loop in this discussion, just as it is when you are using ACR hosted by Bridge. All Bridge does is call upon the appropriate application, whether this be Photoshop, Adobe Camera Raw (ACR), Illustrator or even Microsoft Word and hand it the file, period. You could use ACR for years without ever launching Bridge, even without having Bridge installed. Ever.
Irgendwie vermute ich, daß Deutsch Deine Muttersprache ist. Oder irre ich mich?

Are there new updates for camera raw for Lightroom 4, or only for Lightroom 5, as in 5.3 ?

Are there new updates for camera raw for Lightroom 4, or only for Lightroom 5, as in 5.3 ?

There will be no further camera support updates for Lightroom 4 beyond what is already listed in this table.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Only current versions of Lightroom (currently Lightroom 5.3) will have further camera support added.
If you need to work with Raw files from new cameras you'll either have to upgrade to Lightroom 5 or join the Photoshop Photography Program (to get PC CC + LR5 + extras) or convert to DNG using Adobe's free DNG converter.

When will Lightroom be updated with camera raw 8.7?

Similar Messages

Maybe you are looking for