When will norton internet security have a toolbar for Firefox 23

I am using the beta version Firefox 23 when will the beta version be finalized? I really like having the toolbar for Firefox and Norton said once it is out of beta they will have the toolbar. I am using an iMac OSX.

The release date calendar is here. <br />
https://wiki.mozilla.org/RapidRelease/Calendar

Similar Messages

When will the iPad Mini have a GPS for possible aircraft navigation?

I am a pilot and wanted to know when the iPad Mini will have a GPS that I can use while in flight.

linninaround wrote:
Meg St._Clair wrote:
If you buy the version with cellular, it already does.
This. The cellular iPad has had GPS all the way back to the iPad 1. This might be one of the biggest misconceptions about the iPad.
What?

When will ForecastFox 2.2.2 be available for Firefox 29.0.1

i downloaded the new update, Firefox 29.0.1, and discovered the weather was gone!
I had to do a System Restore to get my Firefox 28 back so I could have my weather back!
Not nice to not give a heads up about this - we depend on having that cool little weather
at the bottom of our screen to plan our days with please... :)
Please make it available and will gladly update!
cjh57

Attention users of Forecastfox<BR><BR>
'''https://support.mozilla.org/en-US/questions/1000643'''
edit: fixed thread link.

Firefox 34 and Norton Internet Security (Version 21 ff) Don't Like Each Other and It's Not the Toolbar!

I have discovered that Norton Internet Security (and Norton 360 as well) version 21 and after conflicts with Firefox version 33.0 and later. I have been running the latest Firefox 34 version. When I upgraded on two of my computers to the latest version of NIS (version 21) Firefox (version 34) froze; indeed it locked up the entire computer. I therefore installed Google Chrome and everything worked fine. I can reproduce this error with Firefox like the flip of a switch; it is very consistent! The conflict, by the way, does not go away by disabling the Norton toolbar. I want to continue to use Firefox, and not Chrome, but I don't want the browser to freeze the machine. I run Windows 7 Professional. Do you have any suggestions?

Oh... I spoke too soon. I went into my office today and ran Norton 360 (Version 21.6) and Firefox 34.0.5 thinking that all would be well because I shut off Hardware Acceleration. Boy, was I wrong. Norton 360 crashed with the Windows message: "Norton 360 has stopped working; it will be shut down." I immediately shut down the computer (even though someone was actually in my office at the time), rebooted, no longer ran Firefox and did a complete virus scan. All is well if I do not use Firefox 34. And so.... I am going to make my life easier and simply move over to Chrome at least on my office machine. I just don't see any other way out of this predicament. I do this reluctantly because Chrome is much slower than Firefox is especially the way I run it. Firefox 34 and NIS Version 21.6 just don't like each other.
Thanks for your help. It's been a good thread even though I could never figure this out.
Needs more help.

My Norton Tool Bar became deleted somehow. I need it so my Norton Internet Security Auto Fill feature will work. How do I get this back on the menu bar?

My Firefox Browser page use to have a Norton Safe Search Bar within the tool bar area. It has to be active thereon otherwise the Auto Fill feature of Passwords for websites I visit - which require my user name AND password - will not be filled in automatically by the Norton Internet Security 2011 software that I have on my computer.
My Question: HOW do I get that Norton Search Bar back on my Firefox Browser Page?

I had the same problem before, but i figured it out. This answer might be a bit late now....
1. Open the Norton program.
2. Scroll under PC protection and select Run Live Update
3. Repeat step 2 until there isn't anymore updates available.
4. Restart the PC
5. Open Firefox browser
6. If the toolbar isn't there, press Ctrl+shift+A
7. Under extensions enable the Norton toolbar.

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox.

I cant install itunes on my laptop, i always could before. Norton internet security say its all in order from their end, it just keeps saying network error when i try and download itunes

I had itunes set up on my laptop and had no issue with it. Today i tried to import a cd but my disc drive wouldnt work so i had to restore my laptop. When i did this my cd drive worked by i couldn't install itunes. I contacted Norton internet security who i spent 2 hours online with while they went through all my internet security settings and they have said it is a problem at apples end. When i attempt to download it just says network failure. Please help!

What browser are you using and have you tried using a different one to dl the file?

After auto update recently, norton internet security won't work. error message:windows cannot access specified path...you may not have appropriate permissions to access item

Firefox did an auto update and since then I cannot open/run Norton Internet Security. It won't even let me update it or re-install it. I get an error message stating Windows cannot find the specified path. You may not have appropriate permissions to access this.

Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu

Why i can use my norton internet security 2011 toolbar in firefox 4 beta9?

i cant use norton internet security in web when i use firefox 4.

I spoke to Norton today and according to them they are working on getting the Phishing Protection bar and other things working on Firefox 4.

Qosmio G30 freezes upon Norton Internet Security 2008 startup

Norton Internet Security 2008 will freeze my computer as soon it tries to load and the only way to go on is to restart the system by pressing the on/off-button.
My notebook is a Toshiba Qosmio G30-177 (Model No. PQG32E-02G022GR) with Vista Ultimate and NIS2007 pre-installed. I have no problems with this NIS2008 version on my other notebook (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
NIS2007 runs fine on my G30 and I do not have any problems at all, but newer versions of NIS seem to get in conflict with my system:
1. I am able to install and run the new version, download all updates and adjust the settings. Maybe one or two days later my computer will freeze after start exactly when the tray icon of NIS appears. For a couple of seconds there is just no response of the system at all and the LED's of my notebook show that all HD activity has stopped. After being idle for these couple of seconds, the cooling fan will start to operate at maximum power, creating a tremendous noise I never experienced before, not even while the CPU was running at 100% for some time due to other programs. Forcing a restart is all I can do.
2. Now this time, I successfully restarted my notebook again (took some attempts) and it suddenly did not freeze. Then I disabled firewall and auto-protect permanently, so there was no freezing upon startup and I just had to manually activate both firewall and auto-protect after start. In order to prevent freezing again after reboot, I always disabled NIS before shutdown. For the next one or two days this workaround was quite successful.
3. All of a sudden, after one or two days, this workaround is going to become useless, because the system starts to freeze again at the very moment the tray icon appears. In this case, restarting has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent NIS form starting by no longer allowing ccApp.exe to automatically run upon start (administrative tools > system configuration > "startup" tab). This is successful and my notebook is able to start normally, but if I later try to start NIS manually, it will freeze again.
I had this problem since NIS2008 was just released, so I thought that meanwhile a Windows or Norton update might have fixed the issue, but this weekend I gave NIS2008 another try without success. I am almost sure that the problem is not caused by any other software than Windows and/or Norton, because I also tried to install NIS after a full system recovery, thus having only pre-installed NIS2007 and Vista on my notebook. I did use the Norton removal tool and followed the deinstall instructions before trying to install the newer version of course.
My last hope was that the NIS2009beta version somehow would not freeze my system, but it does. It does not matter if I try to run 2008 or 2009beta version, the problem is exactly the same.
What really drives me almost crazy is the fact that NIS runs perfectly for some time, then needs a rather small workaround, and then after some time totally refuses to work. In these couple of days I did not change any system settings, install or deinstall any programs or did anything that I felt could conflict with NIS...
So far, I have no idea of a solution and have to use NIS2007 again.
Does anybody know how to solve this problem?

Hi !
I use NIS since 2001 and never had any serious trouble with this software.
There could be some compatibility problem, but I don't think that Vista is causing it, because otherwise a lot more people should have the same problem. Even the installation of all current Windows, NIS and Qosmio updates did not solve it. Of course I tried to get help using Symantec's Support and their user forums, but without success. This problem seems to be a rare one (unfortunately for me). I tested the NIS2009beta and even though it's a new version, the PC freezes again when this program starts. And this made me think that maybe a service or setup by Toshiba causes the problem and other Vista users are not affected. It's a strange thing that the pre-installed NIS2007 version is running fine...
Cheers,
Mario

My Norton Internet Security, Passwrd and user name auto complete doesn't work in Firefox 4

Since updating to Firefox 4 my user name and password auto complete form Norton Internet security doesn't work.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Norton internet security and IE 64 bit

Hi guys HP Touchsmart 300-1125uk win 7 64 bit
2 Questions for you !
The first is, i have norton internet security 2012 installed, so why does it not cover touchsmart, version 4 no norton shows on the screen.
2nd Question internet explorer 64 bit you cannot get any toolbars, well saying that i know of only 1 google.
The problem being when you install google toolbar 64 bit, it takes over everything else, when you go back to IE 32 BIT.
Its taken over that too and resets your homepage to google on 32 bit.
1 More thing youtube for touchsmart, we don't have it.
Any help would be most welcome
Thank you
wob

You are correct about IE 64-bit having limitations, there is no solution, that's why Win7 also has a 32-bit Internet Explorer with it for compatibility. Personally? it's a lot safer to run IE-64 and not have any toolbars which IMNSHO are 99% crap.
If Norton shows in the system tray of WIndows it's installed, it doesn't need to do anything special to also protect the Touchsmart applications, it's not another OS, just an application.

How to Setup/Remove Norton Internet security properly

http://windows-8-1.blogspot.ca/2013/09/How-To-Install-Norton-Internet-Security.html

Hello Vineeth we seem to have a customer that has a problem with Norton could you help once again the topic is here
http://social.technet.microsoft.com/Forums/windows/en-US/7cd22ca7-2ec9-40f6-bf01-c7626ecc8c02/0xc0000225-file-windowssystem32winloadefi-is-either-corrupted-or-missing?forum=w8itprogeneral
had a smilar problem few days ago. I have a Samsung ATIV Tab Pro with Windows 8. It updated it self to 8.1 and after configuration i tried to restart but it didn't open! Gave me 0xc0000001 windows.efi error. I could reach BIOS, help screen with F8 and
Recovery screen. But non of them was solved problem. Until I found this solution from a hard to discover subject >
Press F8. This will open a screen tagged like "Start-up Configurations" with 9 options. Press
8) Disable early launch anti-malware protection.
After this, my Tab PC opened like nothing happened! I guess problem was caused by Norton during update which had came on PC. I deleted
Norton and installed Avast. Now it works fine!
My point is, if you have a similar situation likes this, try this solution before recovery, USB, bla bla..
It is recommended to disable all protection no matter what you use when major system updates. This has been since virus software began, including Defender

Does Firefox disable my current Norton Internet Security?

If Firefox is the security software for Google Chrome, what happened to my current security software, Norton Internet Security 2011, for my Windows default browser, Bing? How do I enable Norton Internet Security 2011 for Google Chrome?

One other note. Firefox allows two situations in which some or all toolbars may be hidden:
* Full Screen Mode. The F11 key switches between normal view and full screen view.
* Script-generated windows. Sometimes when you click a link you launch a window that does not have all of the features of a normal window. This allows sites to present a simplified display, more like a dialog box. If this happens, pressing Ctrl+n should always open a normal window with the full complement of controls.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

When will norton internet security have a toolbar for Firefox 23

Similar Messages

Maybe you are looking for