When will the printer error when atempting to print problem be fixed?

The fix for this problem that is listed does not work.

Here are iPhone battery conservation tips:
http://www.apple.com/batteries/iphone.html
We are not allowed to speculate on this forum about when Apple might or might not do something in the future.
I can tell you that I have an iPhone 5 running iOS 6.0.2 and its battery works just fine. I can go for more than a day without charging it.

Similar Messages

I get the following error when i try to print to a brother hl 5470dw printer using mac 10.6.8 : /usr/libexec/cups/filter/pstoraster failed

i get the following error when i try to print to a brother hl 5470dw printer using mac 10.6.8 : /usr/libexec/cups/filter/pstoraster failed

This seems to come up sometimes. Here is a very detailed discussion, but at the end is a configuration file entry that might be simple to fix (or not): /usr/libexec/cups/filter/pstocupsraster failed | Apple Support Communities

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

When will the Non-Admin problem be fixed?????

When will the problem of non-admin accounts not able to see all flash content on
web pages be addressed???

in addition to poor open GL performance, i've also had problems with any program utilizing antialiasing support. i recently sat down and called apple and had a discussion with their support line. while i didn't mention the poor open GL performance, i did mention the graphical errors i was experiencing with my MBP. i was told these issues are not normal, and have a replacment on the way. while these issues are some what numerous, i've not been able to find much more than a few articles or discussions on the topic. i'm hoping this means it is contained to a few MBPs and not all. we'll see when the replacment comes. if not, however, i'd consider a class action suit. the machine i bought was sold as a portable gaming machine, (apple.com/games/hardware) and thats not what i've gotten. i am very disappointed that apple has not even acknowledged the issue to let us know some fix is in the works. if enough of us make a big enough noise about it, perhaps we can get some sort of reply. i'd recommend you sending a note to apple as mentioned, then take some time to sit and give apple a call. they are very interested in listening to you, don't feel silly about calling about game perfromance, they are advertising these machines as such.
cheers

When will the Ingenia Motion Control Library be available in LabVIEW 2012?

http://sine.ni.com/nips/cds/view/p/lang/en/nid/210877
I get the following error when I try to open an Ingenia example in LabVIEW 2012
1) Does anybody know when this library will be available in LV2012?
2) Are there any other motion control librarys available for LabVIEW?
Patur Sivertsen Vase
www.hfjensen.dk

It looks like the block diagrams have been removed so no version of LabVIEW will be able to open it.
Contact the manufacturer if you need assistance:
www.ingeniamc.com/En/Soporte/Soporte-Tecnico.aspx
English home page:
http://www.ingeniamc.com/En/default.aspx?ChangeLanguage=true
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

I receive the following error when I try to install the new iTunes 11.1 update:The operation couldn't be completed. (NSURLErrorDomain error -1102.)(102)

I receive the following error when I try to install the new iTunes 11.1 update:The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102). What does it mean? How can I fix it?

@varjak paw @Old Toad thank you guys, yes looks like the servers were overwhelmed today. The perfect storm - the release of iOS 7 and iTunes 11.1.- Will wait a little

Upgraded to 10.6.3, got the following error when sshing

I keep getting the following error when I ssh to another machine:
Warning: untrusted X11 forwarding setup failed: xauth key data not generated
Warning: No xauth data; using fake authentication data for X11 forwarding.
It does this with multiple foreign machines, all of which I was able to connect to previously without the error (before the update).
Is there something else that needs to be updated?

Maybe this article will help, if not, you've stumped me.
http://dyhr.com/2009/09/05/how-to-enable-x11-forwarding-with-ssh-on-mac-os-x-leo pard/

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

When will the next iPad os be available?

For iPad 1 when will the new os update release and what fixes will there be ?
I hope the new os for iPad is any laser printer plug in USB cable friendly and wireless laser printer friendy to.
I hope the printer issue is sorted. We want lasers like brother, hp, empsom, canon and so on, to print from iPad 1 and 2
With a USB cable and wireless to laser printer.

ian159 wrote:
For iPad 1 when will the new os update release
This fall.
-> http://www.apple.com/ios/ios5/
what fixes will there be ?
Apple has not stated what fixes there will be.
I hope the printer issue is sorted. We want lasers like brother, hp, empsom, canon and so on, to print from iPad 1 and 2
With a USB cable and wireless to laser printer.
It won't have USB printing.
It's up to the printer manufacturer to make their device drivers AirPrint capable.

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

I am getting the following error when i am trying to check in new created content profile

Hi All,
I am getting the following error when i am trying to check in new created content profile as:
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,weblogic,localhost:16200!$!csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$!syParameterNotFound,dDocTitle
intradoc.common.ServiceException: !csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$
*ScriptStack CHECKIN_NEW_SUB
3:doScriptableAction,**no captured values**3:doSubService,**no captured values**CHECKIN_NEW_SUB,**no captured values**3:validateStandard,dDocName=myucm-005202
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1766)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1716)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)
at intradoc.server.Service.executeSubServiceCode(Service.java:3866)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
at intradoc.server.Service.executeServiceEx(Service.java:3861)
at intradoc.server.Service.executeService(Service.java:3845)
at intradoc.server.Service.doSubService(Service.java:3760)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.Service.doScriptableAction(Service.java:3807)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: intradoc.data.DataException: !syParameterNotFound,dDocTitle
at intradoc.data.DataBinder.getEx(DataBinder.java:1251)
at intradoc.data.DataBinder.get(DataBinder.java:1050)
at intradoc.server.DocServiceHandler.validateStandard(DocServiceHandler.java:1257)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:533)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
... 79 more

Your error states:
!syParameterNotFound,dDocTitle
Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
Eventually, you should have a successful check-in.
Hope this helps,
-ryan

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

When will the printer error when atempting to print problem be fixed?

Similar Messages

Maybe you are looking for