When will you all bring back beauty and the beast to iTunes stores I had it on my old iPad
I once had beauty and the beast on my old iPad and since I got a new one I thought I put it back on my new iPad but it's gone how can I bring it back
It will only be where you put it.
Copy it form wherever you keep it to your iPad.
In some countries you redownload some purchases:
Download past purchases - Apple Support
Similar Messages
-
When will I message be back up and working?
When will the iMessage be up and working
No one would have that knowledge. This page [http://apple.com/support/systemstatus/] will let you know when it is back up because iMessage will be in the green. You can also refer to the timeline at the bottom of the page.
-
When will fire fox bu back up and running i am at a loss without it
why is fire fox down and how long until it is back up and running
OK, thank for the update. The next step is to setup the AirPort Express to extend the signal from the AirPort Extreme using Ethernet
If the Express is powered up, power it off for a full minute
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously power up the Express. This is tricky...you almost need 3 hands to do this.
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
I assume that you have already tested the Ethernet cable to verify that it is working correctly
Connect the Ethernet cable to the WAN "O" port on the AirPort Express
Open AirPort Utility on your Mac
Select the AirPort Express and click Manual Setup
Click the Base Station tab below the row of icons
Type in a name that you want to call the AirPort Express
Type in a device password for the Express
Verify the password
Set time automatically and choose your Time Zone
No other boxes need to be adjusted
Click the Wireless tab
Wireless Mode = Create a wireless network
Wireless Network Name = Exact same name as the AirPort Extreme network
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 or the same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme network
Verify Password
Click the Internet icon
Click the Internet Connection tab
Change the setting for Connection Sharing to Off (Bridge Mode)
Click Update at the lower right of the window
Wait a full minute for the Express to restart
You are done -
WRT1900ac - Beauty and the beast
Took delivery of my WRT1900ac today. I immediately upgraded to the latest stock firmware and performed a factory reset. I'm running an Asus PCE-AC66 (ac) adapter on my main desktop. I was expecting to have to do some tweaking in order to optimize my connection, but the Linksys and the Asus hit 1.0 Gbps via the out-of-the-box defaults. I'm in a suburban bungalow in an area with very little neighborhood traffic, connecting through a single (drywall) wall. The router is installed on a shelf, about 18 inches off the floor, in a shelving unit that holds a plasma TV, a PVR, a Blu-Ray player and an AV receiver (the latter two are connected to the router via ethernet). A (5Ghz) wireless phone base is located about 5 feet from the router. Based on experiments I performed with another ac router, I chose to set the Linksys 5Ghz channel to 149 (other settings on auto - 2.4Ghz settings all on auto). As of this writing it's been about 4 hours and the connection speed (as reported by Windows wi-fi status) pins at 1.3 Gbps and does not fall below 1.0 Gbps.
Fit and finish on the physical unit are excellent. The metal knobs on the antennas are a nice touch and the detents function well. I have the two side antennas at 45 degrees and the two rear pointing straight up. The bright white LEDs look cool without blinking continually (you can turn them off).
Mixed reviews for the Smart Wi-Fi interface. It is obviously designed for the plug-and-play consumer and that's fine. A little buggy. Threw an error while I was reserving and renaming DHCP addresses. As well, the Network Map widget needs work. For one thing, it would be useful if it retained the edited names of devices (as saved via DHCP Reservations). Nits picked. The average user will find, set and forget.
I'll see how the unit fares in the coming days and weeks. It serves 11 clients including two laptops (running at their max 300 mbps), IP cameras and several Android appliances. I have owned 3 other Linksys routers over the years, including the legendary WRT54G.
Kudos.Ok, after a reset and set up from scratch. Leave the app alone till next FW update. The router works well until then.
-
Tabs gone wild! Choice of how tabs open is removed and function of having tabs open only at end of all tabs is gone. Instead, tabs now open next to similar or same site, so they can be jumping all over the place and instead of finding them in the order you opened them, you have to hunt around to see which site it is sitting by instead. I can easily remember the order in which I opened them, not so easy to remember the site each one may be associated with, especially if they were opened in the order of an article and therefore in the order I wanted to read them.
== This happened ==
Every time Firefox opened
== on this latest update 3.6Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''''false''''' -
When will Export"PDF site be up and running?
When will ExportPDF site be back up and running?
Good day Jeffrey,
If you ever find yourself unable to access ExportPDF, it's most likely due to scheduled maintenence. You can see the status of our services by visiting http://health.acrobat.com.
-David -
when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer? Please help me and answer either or both question detailed thanks
Normally when you sync your device it is automatically backed up to your computer as the first step in the sync process. When you choose to start backing up your device to iCloud, iTunes stops automatically backing it up on your computer when you sync. That's what the message is telling your; that you are now backing up to iCloud and not to your computer each time you sync. You can still manually back up to your computer any time you want by going to the Summary tab and clicking on Back Up Now under Manually Back Up and Restore.
You can still sync your device as you did before, it just will no longer back up automatically when you do. -
When updating my iphone 4 for the first time I seem tohave lost all of my apps and the data on my apps. One of these apps was a camera and all of my photos are gone!! I had over 1000 pictures mostly of my children. I cant find them anywhere. Please help! How do i get all of my apps back with all of the data that was on them?? Thank you, LEC
app store - update - purchased - all/not on this phone - select the app you want to download by clicking on the cloud next to it.
-
I restored my phone on iTunes, but when I did, all my info deleted and now it's my sister's old data. I tried to go back on iTunes and restore, but my original data isn't even an option. How do I get my old data back?
Before you did the resotore Via itunes you should of made a Back-up of your Data. But to be honest, i don't think that you would be able to get that stuff back.. Sorry mate
-
I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen
So what happens when you connect to iTunes?
-
when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing this?
Hello katyhale,
I found a couple of articles that might help with the issue you are experiencing with the iTunes Store.
If you are getting a white screen when accessing the iTunes Store and using a Windows computer, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store, I recommend the following article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
In macbook pro with lion os apple gives a full-screen-mode icon in the top right corner of the window, which will be used to open that view in different window. But firefox does not support this. Even chrome supports it.
When will you bring this feature to firefox?. Currently I am in firefox 8.0.1No answers, but Mozilla is aware of the new release of Lion, and hopefully are working on solving some of the known issues. There are some rather formal technical discussions and reports, as mentioned in this contributors thread: [/forums/contributors/707160]
-
Why do you want all our info when will you put a box for what coulore pants i am wearing
why do you want all our info when will you put a box for what coulore pants i am wearing
The only reason I can see you want this info for each install of office 365/2013 is so you know what every person in the world is upto sort it out microsoftHi,
Thank you for your post. Please briefly explain your query so it will be easy for us to give our best.
Whenever you encounter any issues about our products, you can post in corresponding forum. Our technical support engineers will be happy to help you.
Also, please be assured that Microsoft is committed to protect your privacy (Office 2013 Privacy Statement).
Regards,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Upgraded to Mac OS 10.6 because you told me FireFox would no longer support 10.5, tho I had never had a problem.
OK until you upgraded to FireFox 18 -- then all pages SLANT. Impossible to use, and have had to switch to Safari.
Your forum shows MANY with the same issue, yet no response from Mozilla. Seems like it ain't our problem but yours -- so when will you fix it????If you are updating, might as well go all the way to .8, as it includes important security and stability updates for your mac.
-
When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Maybe you are looking for
-
No picture on tv with ipad3 and appletv
I have bought the New appletv. Now i want Play Videos with my ipad3 on tv. All funktions (music, photostreaming) are very good. But when i want watching a Video, there is only Voice on tv, no picture. Can somebody help me?
-
My iphone wont sync i get -9808 error message
DOES ANYONE GET A -9808 ERROR MESSAGE WHEN TRING TO SYNC TO ITUNES I TRIED DEAUTHERIZING AND GET THE SAME MESSAGE
-
Unable to update any software via the App store.
OSX Yosemite Version 10.10 iMac Mid 2010 Please help i get an error return whenever i attempt to update software via the App Store as per screen shot below: Thanks in advance for any help you can give.
-
Hello, I am new to SAP HR. Can anybody help create Personnel area and sub area. I need the steps in detail please. Thanks, Mahti
-
IDOCXMLtoFileConvertor Exception
Hi, Can someone please let me know the reason for below exception for IDOC XML converter. Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: The metadata for the parsed IDoc was not available. See ca