When would be the production release of recording feature be available?

I have seen posts about the recording being in beta. Is there any decision about it's release date?

Thanks Nigel.
I want to first understand what the recording can and can not do. I have not done recording before so my questions may be too naive.
1) If it is a 3 way video chat for example. I am guessing LCCS will record 3 different streams? My goal is to record the meeting and not an individual. Is this possible?
2) Is it possible to record screen sharing session? how about a screen sharing with synchronized audio like a webinar?
I am just trying to understand what the recording does.

Similar Messages

Validating old serial number I used when I purchased the product.

I'm reinstalling MC6 but it won't validate the serial number I used when I purchased the product. How is this resolved?

In this case I would suggest your to check your host file entries once.
You refer below link ( step 3 )
Sign in, activation, or connection errors | CS5.5 and later
If there are no Adobe entries under your hosts file , Try to disable your Anti-virus software for a while and check ( make sure to disable the firewall option anti-virus if available)

When recording my midi keyboard when I press the pedal down it records a low E, how to I get rid of this?

When recording my midi keyboard when I press the pedal down it records a low E, how to I get rid of this?

It was gift back in September. You can follow the instructions in the link below to remove them:
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support

What is the ETA on the production release? Can we pay to remove the graph watermarks?

I can't figure out the ETA on the production release.
Meanwhile, because of the graph watermarks in Beta 3, we have had
to stop getting feedback from customers! Anyone from Macromedia
please explain what we are supposed to do?

Currently, there is no way to remove the watermarks, and the
product is not yet available for purchase so it isn't possible to
let you purchase a serial number.
We haven't given out a specific date for the release, but
beta 3 was our last public beta release before shipping. Hopefully,
the imminent release will let you re-engage with customers.
Phil Costa
Group Product Manager, Flex

When the new release of PM Designer is available (Late than 0.9.6)?

When the new release of PM Designer is available (Late than 0.9.6)?
I need the fix of loading schemas.

0.9.10 is in the process of being pushed to OTN as part of the 2.1.1 release. So it should happen tomorrow or on Thursday depending on how quickly it replicates to the download server. -Edwin

I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!

I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!

Error "The serial number is not valid for this product" | Creative Suite

I cant enter the serial number i received when i bought the product from softwareking

i cant enter the serial number i received when i bought the product from softwareking

May I ask
1. What they charged?
2. What exact product and version?
3. What message you get?
Please don't post the serial number!

I'm getting a random beep sound when I hit the input button to record a turntable

I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

Thanks Jim,
Seems to be this song. Other projects don't have this issue.
I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
I've bounced each track solo, listened and NO click at the 13 sec. mark
No third party plug-ins.
The click doesn't land close to any beginning or end of a region.
Final mix down looks good, no peaking over 0db.
This is making me nuts!

EOS 60D. When I press the shutter release it may take a second or two before it activates

I have an EOS 60D. When I press the shutter release it may take a second or two before it activates or it may activate instantly. In the past it has activated instantly every time. In all cases the camera has previously been focused. This is a new development after having the camera for a couple of years. What’s going on ?

Another possibility is focus.
When the camera is in it's default "One Shot" mode it uses something called "focus priority". When focus priority is active it means the camera will NOT take a photo until it can confirm that it has locked focus on at least one AF point.
You could test this by just switching the lens to manual focus mode (set the AF/MF switch to the MF position). That should cause the camera to take the shot instantly -- every time -- provided you haven't enabled a delay timer.
You can change modes by ensuring the lens is attached and in the "AF" position (autofocus is enabled). Then press the AF button on the top of the camera and use the menu to select "One Shot", "AI Focus", or "AI Servo".
The two real modes are "One Shot" and "AI Servo".
"One Shot" causes the camera to focus until it locks focus... and then the focus system switches off while it waits for you to fully press the shutter and take the shot. It's intended for situations where you are photographing non-moving subjects. If you fully push the shutter immediately (without half-pressing to let the camera focus first) then you'll have a delay while the camera focuses.
"AI Servo" is used for situations where the subject distance is constantly changing. But this mode uses something called "Release Priority" which means the camera WILL take the photo as soon as you fully press the shutter button and will do this whether focus was locked or not. The camera begins focusing when you half-press the shutter... and it never stops checking focus.
The camera will take longer to focus depending on which lens you use, the amount of available light on the subject, and how much contrasty detail the subject has (the camera will struggle to lock focus on subjects which lack contrast -- such as pointing it up to a plain blue sky -- even if it's bright.)
Camera lenses keep their aperture blades fully retracted while you frame and focus the shot. The blades only stop down in the fraction of a second before the shutter opens. But if you have a variable focal ratio lens (e.g. an f/3.5-5.6 for example) and it's at the f/5.6 end, and lighting is poor, etc. then you make the camera work a bit harder to focus.
Tim Campbell
5D II, 5D III, 60Da

How do I get from the test version of Lightroom to the full version when I bought the product a while ago for my macbook pro?

I had to replace my solid state drive in my macbook pro. Since it was full of a strange virus nobody could identify, I only saved the files I needed and no programs. Now I tried to get the full version of Lightroom 5 again but it would not accept my serial number. What can I do?

Download LR 5 from here: Product updates

When is scheduled the new release of iPS and what will be the new features.

There are two kinds of releases, one is new releases which are new versions and other is service packs.
The next service pack is sp4 which is to be released shortly. The next version release is later than june.

Dear all, I have buyed adobe photo shop CC from reseller and installed 5 licences. Accidenly some one requested 5 more licences. Now when i run the products it ask for payment. How i can cancell that 5 licences which accidently requested for smooth runnin

hi

Hi,
If it was a team subscription ,it mean that your user are invited on the wrong subscription.You must connect to your Admin console ,in the top left of the page you'll be able to select one of the two subscriptions .Select the second one and invite you user on it.
Your users must accept this new invitation ,disconnect and connect again to move to the new subscription after your new invitation .

How come Apple can not do it anything when one of the products are stolen .

Con tanta tecnologia no pueden hacer nada ...es increible!
My son just bought his new iPod touch 3 weeks ago and got stolen in the subway station ....Apple can not do anything?

How can you expect apple to track a million devices that are stolen every year across the globe? You had find my iphone on it, you can see if someone connects to a wifi source. If its not connected to the internet or gps how can it be tracked? You cant do it. The best things you can do it hope it shows up on find my iphone if you had it ON and change your itunes passwords. Sorry

Its possible for soon a device with a video and sound connection to an OS CLOUD with MULT-USER paid when we buy the product?

Very good post.
Not sure I agree with everything though
Check out my blog for more information. Feel free to post your comments.
http://portablevideo.blogspot.com/
640K Should be enough for everybody
El_Loco Nokia Video Blog

HT4623 how do you do a software update for iphone 4s when it says the update requires 2.5 gb of available storage?

how to update iphone 4s when it says needs 2.5 gb of available storage?

Go to Settings>General>Usage and see how much space is available on your phone (listed at the very top). The pop-up might be telling you that you don't have enough space on your phone to perform the backup, not that you don't have enough space in your iCloud acount to store the backup.

When would be the production release of recording feature be available?

Similar Messages

Maybe you are looking for