When you expand to show local and remote sites, in DW CS6 how do I get the local to be on the left?
When you expand to show local and remote sites, in the previous verions of DW, the files type (local or remote) selected when not seeing both, automatically came up on the left. I liked local when I am editing and when I am ready to upload I expand to see both local in remote. Before, the one you had selected, in my case local, was always displayed on the left. Now in CS6 when I have local selected before I expand, the local is on the right and remote on the left. For me that is not correct. I find that having local on the left works best for me like reading, left to right, I want the local on the LEFT so I can put the updated from left to the remote on the right.
-->In DW CS6 how do I get the local to be on the left?
Thank you so much! That did it!
Similar Messages
-
The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?
Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.
-
Synchronizing local and remote sites
Greetings
I created a site locally and then FTPed it up to a server at
my ISP. The site was working fine until I made a number of changes
that I note below. When in DW and I try try to preview in a
browser, I am unable to view any of the files in any browser
because DW is unable to locate the files locally and remotely.
The error message I get is:
Firefox can't find the file at
/______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm.
The changes that were made to the site:
- I reorganized my folders locally thereby creating a new
root folder. When I tried to add 3 pages, I received several error
messages. One of them was that DW was unable to locate the home
page. Another was that it was unable to create the site map and if
I'm not mistaken DW was unable to create cache files.
- My client had a friend add some Google analytics to the
site. This person also created an XML site map. Obviously, the
local and web sites were not synchronized so I was receiving more
error messages.
- I then downloaded the site to a new directory in the new
root folder I created above. This downloaded site is my local root
directory in the Site manager and is located at
./______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm
- These are my current directories for the site
thankyouverymuchinc.com:
Site name: Thank You Very Much Inc
Local: ThankYouVeryMuch
----------> Website
-------------> tyvmi 3
---------------> index.htm
---------------> pages
Remote: host: ip address
----------> www/htdocs/
---------------> index.htm
---------------> pages
Many thanks
MarleneDo you have a testing server defined?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"troika22" <[email protected]> wrote in
message
news:[email protected]...
> Greetings
>
> I created a site locally and then FTPed it up to a
server at my ISP. The
> site
> was working fine until I made a number of changes that I
note below. When
> in DW
> and I try try to preview in a browser, I am unable to
view any of the
> files in
> any browser because DW is unable to locate the files
locally and remotely.
>
> The error message I get is:
> Firefox can't find the file at
>
/______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm.
>
> The changes that were made to the site:
>
> - I reorganized my folders locally thereby creating a
new root folder.
> When I
> tried to add 3 pages, I received several error messages.
One of them was
> that
> DW was unable to locate the home page. Another was that
it was unable to
> create
> the site map and if I'm not mistaken DW was unable to
create cache files.
>
> - My client had a friend add some Google analytics to
the site. This
> person
> also created an XML site map. Obviously, the local and
web sites were not
> synchronized so I was receiving more error messages.
>
> - I then downloaded the site to a new directory in the
new root folder I
> created above. This downloaded site is my local root
directory in the Site
> manager and is located at
>
./______/______/_____/_____/ThankYouVeryMuch/Website/tyvmi
3/index.htm
>
> - These are my current directories for the site
thankyouverymuchinc.com:
>
> Site name: Thank You Very Much Inc
>
> Local: ThankYouVeryMuch
> ----------> Website
> -------------> tyvmi 3
> ---------------> index.htm
> ---------------> pages
>
> Remote: host: ip address
> ----------> www/htdocs/
> ---------------> index.htm
> ---------------> pages
>
> Many thanks
> Marlene
> -
Help with local and remote site setups
i've always use dreamweaver to point directly to the dev server files and edit them, save them, and run them. i was the only developer for some time but now we have other developers onboard and we started experimenting with using subversion.
i need to understand how i can leverage the local site and remote sites with subversion so that we arent editing the remote files directly. ive played around with the setting and i think i need to GET the files and have it copy to my local site. however i cannot RUN the files since i dont have Coldfusion on my local machine its only on the DEV server. I used to make a change, press F12 to run the file and could see my changes. can anyone point me in the right direction?First, move the styles from the form generator to the <head> of your document. Otherwise there is a possibility browsers could ignore the invalid code.
Then move your form div inside the banner div and set the attribute float:right; in your CSS for the form div. Then you should be good to go. -
Out of memory errors when trying to sync local and remote sites
We cannot get our remote and local sites synchronized for the first time. We have a huge site and we get out or memory errors or the synch just doesn't work. Any solutions or insights?
Our site has 9,000+ HTML files and accompanying images, pdfs, etc. When we try to synch the remote to the local for the first time, it just will not happen. Every once in a while someone gets lucky, but for the most part, we either get an "out of memory" error or the synch just doesn't work, and it doesn't tell us anything. It just stops responding. HELP!Hi dmooresatx,
I am not aware of the limitations of the file sizes that are allowed for a successful sync operation. If you are using a purchased version of Dreamweaver CC, send me your Adobe ID along with your contact details (phone, email number). Click on my picture and use the message option. If you are using a team license, get these details from your administrator.
Thanks,
Preran -
Configuring UC540 with 2x SPA525G2 (local and remote site)
Just got this new system installed and not sure to get full capability.
Here's my setup and feel free to send comments to help improve configuration.
I have two SPA525G2 phone one local connected to the UC540 and the other one is remote and connected over the built-in VPN
I have 4 incoming lines and we need to have both phone ringing all the time.
On each phone at least one user extension button, one monitor button to see the status of the remote extension, and one group voicemail
So that left me with only 2 buttons to control the 4 incoming lines.
How should i do this setup on the two remaining buttons ?Hello Pierre,
There are a lot of different approaches. The following are some of the approaches:
1. create a group for each if the incoming lines and put the extensions of the two phones in these groups.
2. Create extension for each line and make overlay buttons which include these extensions.
3. Use B-ACD or AA and send the calls there and then forward to the extensions of the phones.
HTH,
Alex
*Please rate helpful posts. -
my i phone screen starts blinking and showing funny and distorted images before going blank. now it's blank,how do i get it back to normal.?
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device
Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup. -
I have bought an iPod Touch 4g and installed TomTom Europe GPS app. How do I get a decent GPS signal in my car, since the TomTom car kit for Ipod Touch doesn't do the job for the ipod Touch 4g?
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews
The bakup that iTunes makes does not included synced media like apps and music.
If you still have the one 2G with the Netflix app, delete the new NetFlix app from her computer anf then transfer iTunes purchased to the iTunes library by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
Then sync to her iPod. You may have to sign the iPod into the account that purchased it to sync it. -
my i tunes store has flipped to the us store and I cannot log in to buy music - help please
On the very bottom right of the iTunes store page you should see a small circular icon with a flag. Click that and you should see a page which allows you to select the respective country store your looking for.
-
I Have an iPad 2and need adobe flash player or something that works the same 2use on some of my sites I use as the iPad2 doesnt support adobe what can I use
No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that." -
Ive tryed everything its not working
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
CS3: Viewing local and remote files simultaneously
A friend recently purchased a new computer. On her previous PC, she could expand the Files view in Dreamweaver (v9) CS3 and see a split screen -- local files on one side, remote files on the other.
She removed CS3 from her old machine and installed (from the same disks) on her new machine. Now, she cannot see the local/remote split screen.
She can expand the Files tab (F8) to fill the screen - but that doesn't help. She checked, and her FTP settings are correct and connect properly.
I know it's possible to do this is CS3 - I've seen her do it and I always worked in this view going back to Dreamweaver 4 - but the option to see local/remote seems to be gone!
Any suggestions on how to fix this would be appreciated.Assuming you have properly defined both local and remote site settings -- Sites > Manage Sites....
Your files panel may be too narrow to see it. Open it up wide, notice the icon at far right for "Expand / Collapse?"
See screenshot:
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
i had a icon on dock that i clicked and showed all applications. i accidentally removed from dock how do i get it back??
Click the Finder icon in the Dock to launch it.
Open the Application folder and find the Launchpad application.
Drag it to the Dock. -
Some apps icons just show "waiting" and don't completely download. How do I delete these?
Hold down on the app icon, there should be a "x". Press on the "x" to delete.
-
iPhoto, prompt kept coming up asking if I was sure I wanted to delete photos. I unchecked the prompt and I want it back. How do I get it back?
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7or later : Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Maybe you are looking for
-
Office 2013 Rollout - Collect missing updates
I have dialed in my custom installer for Office 2013. What's the easiest way to gather all missing Office 2013 updates post-SP1 so I can drop them in the update folder?
-
Determining Edit/Display Mode from Within Freestyle Component
I am new to FPM. We are running ESS. I have enhanced a new Web Dynpro Component onto an Edit page of an OVP (as a Freestyle Component). I want the new WDC to behave differently based on the mode I am in. How, from within the new WDC, can I tell if I
-
Would like to remove OS 9 but I use Distiller
I hope someone can clear something up for me. I want to dump OS 9 from my computer for the space, but I still use Distiller 5.0. I'm so confused by the info on the Macromedia site; it seems that Acrobat 6.0 is the first version to run on OS X. Is tha
-
Exception in thread "main" java.lang.NoClassDefFoundError: continue (wrong
class Continue { public static void main(String[] args) int i=0; while(i>5) continue; System.out.println("Count is: " + i); i++; when i run this program get an error i.e., Exception in thread "main" java.lang.NoClassDefFoundError: continue (wrong nam
-
Pulling in sequenced png files?
Hi. I'm trying to pull in numbered sequence files that I'm shooting out from after effects. In flash this worked like a dream. I could pull in a whole range of clips into a movie clip. is there something else I could export out of from aftereffects t