When you print to a HP All in One printer from a Macintosh Mac OS 10.6.8, it delays printing it.

You click print and it says connecting to printer and just sits there.  Then minutes or hours later, it starts to print.  I have seen it on two different MacIntosh computers with two different HP printers (HP OJ Pro L7650 and HP 6500+) with two different networks.  Note that both computers are not running Mac OS Lion 10.7.1, both were running Mac OS 10.6.8.  Seems to be a printer queue configuraton issue. 

See my answer to your duplicate question in the iPhoto '08 forum - which version of iPhoto do you actually have?
LN

Similar Messages

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I get to the photo tray when using iphoto with HP C6280 all-in-one printer

    How do I get the photo tray option to come up in iphoto from my mac notebook when I have an HP C6280 all-in-one printer

    I have an HP all-in-one C5140.  When I print from iPhoto the dialog that comes up has a "Presets" drop down at the bottom.  One of the choices is "Print from Photo Tray."  Is that there on yours?  If not make sure you have the latest software from HP.
    Dan

  • How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

    how to print to my wireless all in one  photosmart prem c410 when printer is not powered on?

    Hi,
    You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

  • How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

    Hello everybody,
    I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
    The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
    The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
    I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
    BTW: Printing over the net works well from other Windows PCs!
    Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
    Thank you,
    Detlef

    Thank you for the detailed information. Maybe I should have added a few screenshots too.
    The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
    Is this correct? Is there a workaround?
    Thank you for your feedback
    DC

  • I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in

    I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in one.  Does anyone have printer suggestions that you know will scan wirelessly?

    Great information.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • My printer, hp photosmart c4200 all-in-one is stuck in scan mode

    My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode.  I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

    Hi @Bungybill,
    Welcome to the HP Forums!
    I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
    For further assistance, I will need to know:
    The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can't save printing preference HP 6313 All in one

    Since last week my settings changed to the default factory settings and I've tried changing them back to the ones I prefer by doing the following:
    Control panel - Printers and Faxes - right click HP 6313 - printing preference and then I make the changes and click ok / apply (where applicable and where I can)
    Close everything and when I print it's back to the factory settings. Nothing stays the way I want it to.
    I can't save a new printing shortcut, there's no space to fill in a new shortcut.
    I'm running Windows XP.
    The only thing I changed was my scan properties, and I don't think that doing that could change my printing properties.
    Any help would be appreciated since I forget to change the settings every time and I'm wasting ink (which I don't like doing)

    Hi,
    You might try resetting the All-in-One.  Follow the steps listed in this document:
    Performing a power reset
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    The Photosmart 5510 is AirPrint capable.  You can find that information linked below.  There may be something in the network that is preventing communication.  To use AirPrint your router needs to support Bonjour services.  Run the download below.  It will let you test Bonjour services from your Windows PC.  If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour.  Let me know what the app finds.  If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
    Bonjour Print Services for Windows v2.0.2
    HP Web Connected Printers and Supported Cloud Services
    I am a printer tech for HP.

  • Hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    Here you can contact the developer.
    (Notice, I'm posting this line only once. Not 4 times. )

  • Where is the print button on my all in one

    where is the print button on my all in one pc i cant see it at the top of the page

    Hi,
    Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310.  Can't print from iPad iOS6.  They're on the same network, but have different IP addresses.  On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133.  Can I match them? H

    I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310).  They're on the same network, but have differed IP addresses!  The iPad IP is 192-168-1.126 and the printer is 192-168.1.133.  That's the only difference I can see.  Is there a way to fix this?

    fyi:
    you put periods between the numbers.
    Each device needs a unique number.
    for the 192.168.1 the right must number should vary.  192.168.1.x
    the numbers you have look ok.
    Power off all devices: wifi router, printer, ipad.. wait 10 minutes.  poweron router ... wait power on printer wait then power on ipad.
    cross fingers.
    Robert

  • Why wont' my Iphone 4 print to hp 4500 all in one?

    I downloaded the Hp home&biz app to print to HP 4500 All in one printer.  
    I can print from Ipad, Itouch and MacBook Pro but not from Iphone 4.?????
    I have tried everything.
    Thanks.

    Hello dobis11011,
    You have verified a lot of common factors that can interfere with the printing method that you want to use.
    I would also try some additional steps, you can try to print after each step to isolate the causing factor:
    Verify Bluetooth is off (preferred setting).
    Power your iPhone off and then on.
    Press the home button twice and end the HP ePrint Home & Biz app from the multitasking section.
    Delete the app and re-download it from the Apple App Store, as it is a free app.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • C6280 All-in-one driver for windows 8.1 - unalbe to select automatice 2 sided printing

    I downloaded and installed the driver and full photo print for my old all-in-one but now I don't have the option for automatice two-sided printing. 
    Is there a different driver specifically for the C6280 printer I can download?
    pennyph

    Hi @pennyph,
    Thank you for visiting the HP Support Forums!  I see you have recently installed the full feature software and drivers for your HP Photosmart C6280 and now you do not have the option for two sided printing (Duplexing).
    I would like you to start here: Printing on Both Sides of the Paper (Duplexing) in Microsoft Windows
    Please make sure you have enabled the two-sided printing module (duplexer):
    1. Go into the Printers and Faxes folder.
    2. Right-click the device.
    3. Click Properties (not Printing Preferences).
    4. Open the Device Settings tab.
    5. If the duplex unit shows Not Installed, click Not Installed.
    Change it to Installed.
    The Automatic selection is added to the list of Two-sided printing options in the Printing Preferences (not Printer properties).
    I hope this helps! Let me know if you have anymore questions.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for