When you're playing back from storage device, how do you save volumn changes to tracks?

from storage device

Pretty vague question. I'll try to guess.....
If you mean you'd like to make changes to a Logic project that is on a dvd, you'll have to copy the project folder to your hard drive to save changes.
If you mean you want to make level changes to audio files on the file level, you have to edit them in the sample edit window.
If neither of the above you're gonna have to try again.

Similar Messages

When watching my Apple TV (3rd gen) the picture jumps a few frame every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

When watching my Apple TV (3rd gen) the picture jumps a few frames every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

These may be different issues, but lets look at rentals first.
Poor motion can result from mismatched output. If your source is 24 or 30 fps you should set the output of the Apple TV to 60 Hz, for 25 fps content use 50 Hz.
Additionally motion software on the TV itself can cause the picture to jump, check your TV settings and turn off any motion settings in use,

I was trying to change from my iphone 4 to my new iphone 5, and i backed up my contacts onto iclould, when i restored my iphone 5 on my computer, the contacts were wiped from both devices, how do i recover the contacts?

i was trying to change from my iphone 4 to my new iphone 5, and i backed up my contacts onto iclould, when i restored my iphone 5 on my computer, the contacts were wiped from both devices, how do i recover the contacts?

On the iPhone tap Settings > iCloud
Make sure Contacts is switched ON. It may take a few minutes for the data to sync via Wi-Fi.
If you are using iCloud, there's no need to connect your iPhone to a computer via iTunes to sync your contacts.

When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter-

Do text messages not back up when you save to ICloud?

do rext message not back up when you save and restore to ICloud

The backup should contain text messages. The backup includes (from http://support.apple.com/kb/PH12519):
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
iMessage, text (SMS), and MMS messages
Ringtones
Visual Voicemail

TS3988 When i update my iphone to ios 6.1.3 I can not restore my data neither from icloud nor from my device.How can I restore again. I do not have any backups except the one on icloud.

When i update my iphone to ios 6.1.3 I can not restore my data neither from icloud nor from my device.How can I restore again. I do not have any backups except the one on icloud.

What happens when you try to restore from icloud?
instructions here, under line "restore from icloud."
iOS: How to back up and restore your content - Support - Apple

Getting error message when trying to play songs from library saying original file could not be found

when trying to play songs from library, getting message saying original file could not be found .. my full library all says the same .. can anyone help ?

Hello Ceeclass,
I suggest this article named iTunes: Finding lost media and downloads found here http://support.apple.com/kb/TS1408.
It should help you locate the media that is not playing in the iTunes library.
Take care,
Sterling

Keeping state when switching to and back from a help page

Hi
Is there anyway to keep entered data in input fields when switching to and back from a help-page?
I would like to let the user enter a lot of data (in a datatable), realize that he needs some help, click the help link, go to the link page without having all the data validated (immediate=true), and then return to the page with all the data still there.
Any ideas

<context-param>
        <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
        <param-value>client</param-value>
    </context-param>i found this in web.xml , please see if this is of any use ,if you already get it please post the answer
cheers
harsha

Apple TV won't play music from one device via Home Sharing.

So I have just bought a new Mac, with which I got an Apple TV. I'm trying to save disk space on my Mac so I've setup my old computer (with my old iTunes library) as a Home Sharing hub kind of thing. However, the Apple TV seems not to want to play music from this device...it shows the song, but the buffering symbol comes up under the song and nothing happens. Sometimes some songs will work, and shuffling also seems to work, but it will randomnly skip some songs without even attempting playback.
I've tried playing the same music on the Apple TV via Home Sharing on my Mac — fine. I've tried listening to the music (and just generally playing music) using Home Sharing from my old laptop to my Mac and it's fine, impressively speedily, in fact.
Does anybody have any ideas as to what may cause this?
Thanks

Dutch Oven wrote:
I am having a similar issue, but it's only affecting stuff I added to my library > 9 months ago. See the thread I created here: http://discussions.apple.com/thread.jspa?threadID=2601054&tstart=0. How long ago was your music added to your library? I'm guessing it was a while ago.
I added my music to iTunes years ago. Most of it was with version 6.x of iTunes. I see all of my music and it plays fine so something else must be triggering the problem.
I also have 'Show list checkboxes' checked.

When I'm playing music from my laptop on my Apple TV, I'd like to shrink the album on the screen so it's in the bottom corner, not filling the screen.

When I'm playing music from my laptop on my Apple TV2, I'd like to shrink the album on the screen so it's in the bottom corner, not filling the screen.

I don't believe that's possible. It will either fill the screen, or will show a thumbnail when the screensaver is on (disappearing after a few seconds)

When you save a picture from a website, where does it go?

When you save a picture from a website, where does it go? I tried to save an image file from the web but I could not find it on my iPad. I'd like to be able to send it to Drop Box.

It should go into the Camera Roll/Saved Photos album in the Photos app

I have a new mac air 11inches, i tried to download my pictures using my usb mass storage device. how come my mac can't recognize and open my files? pls help...

i have a new mac air 11 inches and i tried to download my pictures using my usb mass storage device. how come my mac is not reading it? pls hel...

What exactly is your 'mass USB device', and how is it formatted? When you connect it to your MBA, does it show up on the desktop?

When I copied a photo from any site, how can I see it in iPhoto

When I copied a photo from any site, how can I see it in iPhoto?

When you tap and hold on image in safari, there will be context menu. Usually there two options at least:
* Save image
* Copy
If you'll tap Copy - it will be copied to buffer and you can paste it at your new email (for ex.)
If you'll tap Save image - it will be saved in Photos app on your iPad (in my case it saves at Camera roll album)

Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it

Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it, so the printing goes directly from Lightroom to the printer.

MartyOretsky wrote:
Let me try again. I am in Lightroom and click print. Then I am launched to PS.
This is not possible.
What you are seeing is not PS, it's your printer dialog. PS does not have an ICM button.
And you say: " Lightroom doesn't stop working; rather CS5 stops working"
And what does the error message say that you posted in the screen shot? Does it not say "Adobe Photoshop Lightroom has stopped working" ?
Do not be confused. Adobe Photoshop Lightroom is the official name of Lightroom. This is not CS5 that has stopped working. CS5 does not come on when you hit the print button in Lr.
It is Lr that has stopped working.
And you say: "My next step is to click on ICM so the color controls are done by the software."
This is wrong. When you want Lr to do the color management, you select a profile in the Print Module, in the <Print Job> panel under Color Management / Profile.
In the screen shot below I have selected a profile for my HP printer and paper. And that's where you select a profile for your printer and paper.
You do not click on ICM in your printer dialog. You click there only when you want your printer to manage colors.
So try to print by selecting the profile in the print Module as indicated and do not click on ICM.
By the way: Which OS? Are you on a Mac?

HT3775 I have a camera security system that when you save video files have either a mp4 or avi extension. Is there an application to open these files?

I have a camer security system that when you save video files have a mp4 or avi extension. Is there an application that I can open these files with?

Try VLC media player seems to play anything.
http://www.videolan.org/vlc/

When you're playing back from storage device, how do you save volumn changes to tracks?

Similar Messages

Maybe you are looking for