Whenever I plugged in HP laserjet M1132 printer usb to my Macbook air,a screen pop-out "the disk inserted are not readable by this computer".I uninstalled

Hi,I'm new here and I think my problem were discussed few times before.However,I tried to follow the solutions similiar to my condition but it does not work.My problem is whenever I plugged in the HP printer (Laserjet M1132 MFP) usb to my Macbook Air,a screen will pop-out and read as 'the disk inserted is not readable by this computer'.I even bought my Mac to the Mac store but the situation remains the same.Okay with other printer but not with my HP.Sigh.The HP printer worked just fine with other computers (not Mac).I'm really sick of it.Please help me.I once plugged in an external hard drive & started Time Machine with it.The printer problem started after that.However, the hard drive plug-in works just fine.
Your attention of above matter is highly appreciated.Thank you.

Here is what worked for me:
I reset the System Management Controller on my MBA.  To do so requires shutting it down, keeping it plugged in to power (I also unplugged both USB connections), and then from a powered off state I simultaneously pressed Shift + Ctl + Option + Power (I did this once and it did not work so I tried again and did it 3 times just to be safe), then released them at once, then I pressed the power button.  Problem solved.
http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
I also tried uninstalling the using the repair Disk Permissions with Disk Utility and moved the HP Printer software accessories to the trash (you can search the web for how to do that but that did not solve the problem either).  Neither of these options worked.

Similar Messages

  • I get this message whenever I turn on my printer: The disk you inserted is not readable by this computer. How can I fix this?

    Whenever I turn on my printer (HP OfficeJet Pro L7590), I get an error message that says: "The disk you inserted is not readable by this computer." Then I have to click "ignore" or "eject." I click ignore, and everything works as it should. But the error message is annoying, and it only started happening a few weeks ago. I got the same message when I was using OSX 10.4, and now that I've upgraded to 10.6.8, I'm still getting it. How do I get rid of it?
    Thanks!

    If you installed the Seagate software, remove it according to the manufacturer's instructions.

  • HP Laserjet P1102w by USB "The disk you inserted is not readable by this computer"

    My HP Laserjet P1102w used to work fine with OS X10.10. Then it started saying "The disk you inserted is not readable by this computer" whenever I switched it on, but the printer still worked. This morning it didn't. I uninstalled the printer, but can't re-install it - it isn't listed when I click "+". I have tried a different USB cable, and a different USB port - same message. The HP website does not provide a downloadable driver, as far as I can see. What do I do? (The wireless connection to the printer stopped working ages ago. The printer still works with our two PCs via USB.)

    Hi Shapley,
    Repairing the disk permissions can be done as following:
    1. Open the the Applications folder.
    2. Go to the Utilities folder.
    3. Double-click on Disk Utility.
    4. Select the hard drive containing the boot volume.
    5. Go to the First Aid tab and select Repair Disk Permissions.
    Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
    Next reboot your Mac and try plugging the USB again.
    If the same persist, a such may also happen due to a conflict with the HP Smart Install feature which is Windows Based only and being wrongly read by the Mac, in order to resolve a such a Windows based PC will be required. any laptop should meet the purpose, the printer will be installed automatically by connecting the USB.
    Next update and install the latest firmware below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794- 2&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
    Next follow the HP Smart Install Control Utility below: Select the Printer and follow the on-screen steps to disable the feature for the printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-129224- 1&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
    NOw plug the USB back to your Mac and check for any difference
    Please let me know of any change,
    Shlomi

  • "The disk you inserted was not readable by this computer" box appears when printer cable inserted into USB connection.

    When I plugged my printer cable into my MacBook today I received a message "the disk you inserted was not readable by this computer" with options to Ignore or Eject. The printer worked fine yesterday but does not respond today. Additionally there is abox titled "All Messages" appearing on my screen which is producing new messages every minute or so the most common of which is disk1: I/O error and disk1:alignment error, SAM Multimedia: Read or Write failed.
    I tried unsuccessfully yeseterday to install a scanner on this MacBook.Everything seemed to progress normally during the install but the Scanner did not show in my applications after my attempt to install.
    Any ideas?
    Thank you in advance

    I uninstalled and reinstalled my printer and everything seems to work fine now.

  • Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port.  Recently installed a portable hard drive for back up purposes.  Related?

    Does your printer have a slot for an SD card?  Is there are card in the slot?  If so, the computer is trying to mount that card as an external device.  It might be corrupted so that it can't be read.

  • F this error message  "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  It comes up every time I start my new printer. How do I get rid of it?

    When installing my new HP printer I received the following error message when I inserted  the software install disk: "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject"  I was able to eject the disk but the message remains. Now every time I start up the printer this error message pops up on my computer.  I have since used the disk drive successfully for music CD's etc.  How can I get rid of this message?

    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I am getting the message "the disc you inserted was not readable by this computer" when I plug in a verizon air card into my macbook air.  It also does not show up as a device on my desktop.  However, I select "ignore" and am still able to connect.

    Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject.  I select ignore, and am able to connect to the internet, but don't know why this happens.  Also, the air card is not showing up as a peripheral on my desk top.  Any ideas why this might be happening and how to fix it?

    When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
    If I need to replace it can the data on it be recovered?

  • I receive this message when I plug in my Samsung Continuum phone. "The disk you inserted was not readable by this computer." How do I download my photos?

    I have checked usb debugging and chosen mount the device when prompted by the phone. I have tried to mount without debugging chosen and the same message pops up. Initializing my phone is not an option.. Choosing ignore does just that - nothing happens. At this point I cannot download music to my phone nor download phots from my phone to my mac. Thanks.

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

    I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • When I plug in an USB stick, my MacBook Air disables all USB devices

    When I plug in an USB device, my MacBook Air disables all USB devices and the keyboard. It looks like it would freeze, but all applications still work. It just does not respond to neither keyboard nor mouse. The only solution is to force-restart it. What can I do? I am using Lion and have updated it. The same error occured with Snow Leopard as well. Unfortunately, it sometimes happens and sometimes not. I have a suspicion it is related to the devices power consumption in corelation with the battery charging status.
    I am using a MacBook Air 13", late 2010 version.

    Have you tried plugging the flash drive into a different Mac to see if it works? The Air shouldn't have any problem with it, I use a couple of flash drives in mine, although I don't have a pq1. Did you try both USB ports on the Air? Do you have another flash drive you can test in the Air, or a different USB device, like a hard drive or printer?
    The only thing I can think of is either a bad flash drive, or a bad USB port on the Air. Sorry, can't be more help than that.

  • Envy 4500 has stopped printing off both a Macbook Air and a Pro - was fine before

    I've been very happy with my printer/scanner but today it has stopped printing off both my Macbook Air and Macbook Pro.  The printer seems fine so not sure why this has happened.  Please help!

    Hi @Swaggie,
    Welcome to the HP Forums!
    I understand that your HP Envy 4500 is not printing from your Macbook Air and your Macbook Pro. I am happy to help you with this printing issue!
    For further assistance, I will need to know the following information:
    The version number of the Mac Operating Systems. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies. Copy Text or Mixed Documents.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    If there are any error messages on the printer's display panel.
    In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X, and let me know what happens!
    Hope to hear from you soon!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I cannot print wirelessly from my macbook air

    I am trying to print wirelessly from my macbook air 256gb. We have a HP Deskjet 3050 J610 series. It works fine printing when I plug my computer into the cord that is connected to the printer. but without the cord, it says the printer is "offline". I am wondering if the only way to print is if I connect it with the cord, or if i can somehow print wirelessly that I do not know about. thanks!

    also, the printer says it is not connected, maybe if i connect it, i can print wirelessly. how do i connect it?

  • I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

    I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HP Envy 120 All in One Printer no longer recognises MacBook Air

    Since upgrading to Yosemite, my HP Envy 120 no longer recognises my Macbook Air and vice versa via the router, having worked previously (not perfectly all the time admittedly but connection wasn't an issue). I can connect Macbook to printer via HP direct, but this means disconnecting from the internet, scanning, then re-connecting to internet which is a bit of a faff and seems a backwards move. 
    I have downloaded the latest HP printer driver software, followed all suggestions I can find on this such as deleting the printer on the Macbook under system preferences, but when I try to add it back on, nothing shows. I've tried adding the IP address manually, this comes up with an error message. I've done the wireless wizard on the printer and that was successful so it is connected to the router but is not detecting my computer, which is also connected to the same router.
    The printer is still under warranty - I meant to take it back when I had earlier problems but decided to stick with it a bit longer. I'm just trying to work out - is it a HP problem or is it an Apple problem - ie can I return the printer under the warranty?
    Or does anyone have any simple fixes? I'm not at all computer literate!
    Many thanks!
    This question was solved.
    View Solution.

    Hi,
    As you mention that you do able to use the printer with no issues by using HP Wireless Direct, that means that this is neither HP or Apple issue but a network connectivity issue.
    Apple devices uses Bonjour to communicate with the printer, that relies on IP Muticasting which need to be supported by your router.
    If I clearly understood your description and the device do work as expected using HP Wireless Direct, the router is the cause for this issue as you do not see similar issues while removing the oruter from that acquisition... please also let me know if i have misunderstood your intention about the issue.
    Additionally, have you tried rebooting your router by unplugging its power for 10-20 seconds? once it starts up reboot both the printer and then Mac and check for any difference..
    Please try that and check if that help. if the issue persists do let me know your router brand and model, its settings or capabilities may cause a such and may prevet this kind of connectivity.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT201181 hi, in apple MacBook Air 11.6" what is the shortcut key for print screen

    hi, in apple MacBook Air 11.6" what is the shortcut key for print screen

    To capture the entire screen to an image, use the key combination ⌘ shift 3.
    To capture a selection rectangle, ⌘ shift 4.
    To capture the frontmost window, ⌘ shift 4 and then press the space bar.
    The screen grab will appear on your Desktop. Open it in Preview or your favourite image editing software, and print in the usual manner.

Maybe you are looking for