Whenever i raise the volume to the highest level the purity of the sound decreases how to solve this problem ??, whenever i raise the volume to the highest level the purity of the sound decreases how to solve this problem ??
whenever i raise the volume to the highest level the purity of the sound decreases how to solve this problem ??, whenever i raise the volume to the highest level the purity of the sound decreases how to solve this problem ??
Spend at least $350 on headphones. The problem is not the quality of the output from the device, it's expecting a pair of $29 headphones to perform above and beyond what they were designed for.
Similar Messages
-
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?
Check System Preferences > Sound > Output
Make sure the correct device is selected. -
i have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem
I am having the exact same problem with the iMessage on both my MacBook pro and my iphone4. It either says the username/password is incorrect or it can not contact the server. Facetime and iCloud works just fine with the same apple id and password. Somebody please help, I am beyond frustrated!
-
I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?
Try:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?
Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right. -
I can't activate my programs even though I paid for a subscription. I did a chat with the help desk and they didn't solve my problem. I want to cancel my account. Please contact me since the chat is down
Activating after a Find My iPhone lock bricks the device if you don't know the password used by Find My iPhone.
Read through this article to find if your device has an activation lock.
http://www.macworld.com/article/2048739/get-to-know-ios-7-activation-lock.html
If this is what you have - the news is bad:
http://www.cultofmac.com/246755/why-ios-7s-activation-lock-is-a-disaster-waiting -to-happen/ -
"This is not a Test User account. Please create a new account in the Sandbox environment." How can i solve this problem?
Where are you seeing that? And what exactly are you doing?
Are you a developer? If so, ask in the Developer Forums... -
the maximum number of free accounts have been activated on this iphone and i need create accound but i can't :/ please anyone tell me what i do to solve this problem
thnx bro i create nw accound
-
I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.
First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
Tried to watch, movie, "this means war, but couldn't get any sound working , always came up with error, also we tried to play things from you tube and iview but the icon for the apple tv wasn't there, we switched and restarted the Internet, wireless(airport ) and even restarted our iPads , but could play anything thru apple tv, even on my computer (Mac book air) the icon was there but only allowing to p,au on the MacBook air,there was no option fir apple tv, I also restarted the apple tv, still nothing working
I'll try agin tomorrow , the 22 July and see if anything is working
Cheers lilianI am experiencing a similar problem in Windows 7 64bit. Since my laptop has a 128gb SSD, I have loaded my iTunes library on to an external drive. I can sync my iPhones and iPads from this library, and the songs play fine from those devices. However, when I select a song from my library, and click the play button, nothing happens. iTunes does nothing. I have also tried right-clicking mp3s in my library and selecting "Play", with no results. I do not receive an error message of any kind.
I have also noticed that some of my mp3's within iTunes denote the Time as 00:00. The same mp3's will play and register properly using other mp3 players on my computer, and they also play normally on my iPhones and iPads.
I am running Windows 7 x64 on a Lenovo T530, in iTunes 11.1.3. Everything else in iTunes appears to function normally. I can listen to internet radio stations without an issue, through iTunes, and they play as they should. I have tried three different external drives, with different drive formats, and they all have the same issue. If I copy my iTunes library back to my internal drive, iTunes will play my mp3s.
I did not have this issue with iTunes 10, so I am assuming it is something that has occured within the last few updates.
Has anyone found a fix for this? Unfortunately, I am forced to use iTunes 11 because of my iOS devices, otherwise I would revert to iTunes 10. -
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
Updated to Mountian lion 2 mnths ago had nothing but problems,I had no problems with lion, so i had a tech reinstall lion, Now agian I am having problems with the cursor freezing and disappearing in photoshop and not being able to use type in word, safari, mail, photoshop6 ,lightroom4 any suggestions as I don't believe apple is going to doing anything,thy've stuck thier head in the sand and ignored it.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Maybe you are looking for
-
Adobe after effects cs5 is not responding on my windows 7 64 bit operation computer.
i have adobe after effects cs5. i just open application and use like 5 minute and when i open any other application with multiprocessing that after effects will show it is not responding. I really need help on this.
-
I have a vertical menu in my page and the first menu item is not being formatted like the rest in Internet Explorer (everywhere else it is fine). I'm not sure why. Can anyone help? I have no idea what to do, and this has to be done pretty soon. You c
-
I'm new to iWeb but am not new to Apple's. I've been experimenting with the Doodle template and whenever I launch iWeb an error message comes down saying that there is a Missing Font which is Handwriting-Dakota. The only option it gives me to resolve
-
I have a pivot table view as below and RSUM gives proper values if I have a single column i.e bbb in this case but gives wrong values when I have more than 1 column i.e ccc in this case.Please tell me how to solve the issue bbb
-
I'm trying to convert an old Excel sheet to Numbers and TRUNC is failing to do its job. Example: =TRUNC(G8, 0) >>will look at G8 and truncate properly. =TRUNC(G8, 0) & ":" >>When trying to add text, the number loses its truncation and adds 2 decimal