Whenever i want to download an app or update an app i get " a secure connection could not be established. please check your date
i need help!!!
Go to settings and make sure your date is correct under general... it probably means your date is very far off. Good Luck!
Similar Messages
-
already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date & time settings. please help
Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight -
When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings. Can someone tell me what this means and how to fix the problem?
It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.
-
My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.
Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time -
Whenever I try to download an app, it always says "Cannot connect to iTunes Store", even though I am connected to wifi three bars. And sometimes it just goes blak and quits the app. Right after I downloaded iOS 6 this started to happen. Please help me.
See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
-
I have been trying to update my iPhone4s' software from version 5.0.1 to version 5.1. I continue to get a message from iTunes that a network connection could not be established. I was buying apps for my phone on my computer so I know that my connection is good. I clicked on Help in iTunes and had it to run a network diagnostic and all was good. Are the servers just jammed up with so many people trying to update to the newest software version? Thank you in advance for your time!
Sincerely,
PrettyinPinkInklook around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
In our R12.1.3 EBS, on RHEL 5.5, 64-bit, we are getting this error -
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
However, neither the db is down nor the APPS password is wrong. I am able to connect from sqlplus from application tier. And also from the 10.1.3 home. I have checked similar threads here but none helped. Raised an SR yesterday but that too hasn't helped yet.
Any ideas?
Regards,
Vinodplease post he output of
SQL> show parameter sec_case_sensitive_logon
$ECHO TWO_TASK
clean FND NODES
How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Check if all services are down on application node, no process should be running.
shut down db listener and database
reboot the server
start or reload listener on DB node and start the database
Run autoconfig on db tier -- make sure it completes successfully.
Run autoconfig on all apps tier -- make sure it completes successfully.
Now, try to start applications on middle tier.
ApPsMaStI
sharing is Caring -
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Whenever I want to download a free app, it asks me for 3 security questions. I answer them. Then it says "session has timed out". Then the whole process starts over. How can I get around this?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Hey everyone,
I moved from France to the US, and when ever I want to download new apps, it says: you must switch to your French account before purchasing. Does anyone know how to do that?
Thanks for your help!Hello riad86
The article below will give you the step-by-step process to change the country of iTunes Store you are in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
-Norm G. -
I am using numbers but I am not able to update last version of numbers. When I try to update that I get error that you could not able to download this app. So what should I do?
Try running the combo update.
10.9.2
If that works and it still shows as an update, try re-indexing Spotlight.
Spotlight – Re-index -
I keep having this problem. I can still run all of my apps just fine, but because of this error I can't download any more. Please help!
If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.
-
When an app is free and it asks for account information which is correct why does it keep saying payment type invalid please choose another payment type.?
Maybe check with your bank and see if everything is ok with your account.
settings - appstore - view id - account info, then you can edit your payment.
Maybe you are looking for
-
No authorization on HANA cloud platform odata and UI5
Hi there, I'm building a SAPUI5 app on the trial cloud. I have a local table in the xs application, which i present via odata. In my SAPUI5 app i have a list showing the content of this table. I currently have the whole app working, but with authoriz
-
I have a big problem with my usb connection. Very often it happens (generally the bigger the file the more often it is) that indicator of copying to phone stops... th only i can do is to plug off the phone and plug it in again hoping this time it wou
-
Hi, I am having trouble doing basic fills such as filling a polygon with red crosses on a yellow background or similar (blue dots on green background etc...) I can only get a pattern to overlay on a white background (or invert). How can I do this? th
-
Hi, I have a JTree with a special renderer and editor that allows me to display a JCheckBox in the tree nodes (leaf nodes only). I'm having a problem where if the user clicks/unclicks the checkbox in the tree node, the treenode becomes unselected (Th
-
My Evaluation of Adobe Edge Code CC
Pros: • Conversion of images for export of assets from PS works well • Reflow interface is quite sophisticated and the GUI makes it really easy to conceptualize the how your composition will flow when resizes with all the breakpoint