Whenever my mac wakes up from sleep it now asks me to give my password

After updating to Lion I had to update my Legacy FileVault to the 'new' FileVault. Done. But after that I have to give a password to wake up my mac even though this option is not checked in System Prefs>Security..>General>Require Password. Any ideas, and thank you ahead of time.
M.

My Energy Saver preferences does not have a "wake on [modem] ring" checkbox.
It does have a "Wake for Ethernet network access" checkbox but it is not checked.

Similar Messages

  • Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    Okay, I seem to have solved the problem I posted about earlier.  I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French.  When I switched it back to American English, my password worked when waking the computer from sleep mode.  I have no idea why changing the language preference would affect the way the password works but that seems to have been the case.  I'll post again if I experience more problems.

  • HELP! my mac has logged me out and now asking for a name and password?

    I was logged on shopping on top-shop online and suddenly the mac shut down.
    It seems it has reset its self! My icon has disappeared and its now asking  for a name and password.
    i have tried my log in but it is not working.
    Is there another way to reset the password?
    can i reset it to log back in what can i do?
    I have rebooted the computer several times but i dont know what to do!

    First, make sure caps lock is not on.
    Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination   command-space or command-option-space. See this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • Why does my mac wake up from sleep while it is closed when I plug in the charger and viceversa (plug or unplug)?? It is latest 13 Pro with disk drive 2012-2013

         I dont know why it happens. I clos my mac, it goes to sleep and when it is already sleeping if i plug the charger then it wakes up, or at least the fans and the white led light near to the infrared thing turns on. And this also happens if it is sleeping with the charger plugged and whenever i want to quit the plug cause its already charged it turns on. All this happens with the lid (top cover) closed and only when it is sleeping and I unplug when it is pluged, or plug if it is not. I have some more Macbook pro olders 2010, and 2009-8 with 10.9.2, and this thing does not happen to them. Please if someone knows tell me??? If it is not clear is the Macbook Pro 13 with 3.0 usb, disk drive, the latest that apple announced with the disk drive, so i think it is late 2012 or 2013

    There are two distinct sets of settings for Energy-Saver items -- one for Battery, one for Power Adapter.
    When you plug in the adapter, it needs to wake up and change over to the other settings -- sort of like the hospital waking you up to be sure you get your sleeping pill.
    The later versions of Power Management are more sophisticated than older versions, so they are more likely to do this "correctly" -- to wake up and change over.

  • Early 2008 Mac Pro wakes up from sleep with Mavericks.

    Ever since I upgraded to OSX Mavericks on Tuesday, my early 2008 Mac Pro keeps waking up from sleep mode every couple hours. It goes back to sleep again on its own though after a minute, so I'm thinking it's some kind of new automated feature that I'm not aware of. With the Mac Pro being fairly loud when it wakes up from sleep mode, it woke me up three times last night! Is there some kind of option in the system preferences that I'm not aware of that can deactivate this new behavior? I usually only shut down my computer once a week, and keep it in sleep mode when I'm not using it most of the time, but I'm going to have to start shutting it down every  night now to keep it from waking me up throughout the night...

    Hello MARl0,
    You may want to disable the Power Nap functionality, if available, in System Preferences -> Energy Saver.
    OS X Mavericks: Change Power Nap settings
    http://support.apple.com/kb/PH14391
    Cheers,
    Allen

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • Leopard won't wake monitor from sleep on Power Mac G4

    I had no problems with my Power Mac dual G4 867 while running Tiger, but immediately after a clean install of Leopard (a fresh install - no third party apps) my Dell 17 inch LCD monitor will not wake from sleep.
    The monitor comes on just fine when the computer first boots, but if the computer sleeps, and I wake it by hitting a key on the keyboard, the drives spin up and I can hear that it thinks it's working just fine, but the monitor won't wake.
    I know that the computer is working fine despite the sleeping monitor because I can hear VoiceOver working after a clean install of Leopard (if I let it sleep after the Welcome movie) while asking for user information.
    I reinstalled Tiger, and the problem disappeared. The monitor wakes reliably from sleep with a fresh, clean install of Tiger. But with Leopard, even turning off and on or unplugging the monitor doesn't wake the screen.
    I have reset the PRAM, the PMU, and the Open Firmware (the firmware is up to date). I even opened the case and pulled and re-seated the video card. Nothing seems to work, so I have just set the computer to never sleep. Not a great option, given the insane fan volume in the G4 MDD model.
    Thanks for any suggestions anyone can offer.
    KHult

    I'm having similar problems with both a new MacBook Pro and a new Mac Mini, both connected via a Gefen DVI switch to a Dell 2005FPW monitor. Putting the MacBook Pro to sleep while in dual monitor mode will crash the machine. Putting the Mac Mini to sleep won't crash it, but the monitor won't wake—the computer wakes, but the monitor stays black. I can use Screen Sharing to connect to the Mac Mini and restart it (the only fix, as far as I can tell).
    I suspect this is a software issue, because my old PPC Mac Mini would usually wake from sleep. The Gefen support people say this shouldn't be happening.
    Anyone having this problem should probably post it as a bug at Apple's Feedback page. I think reinstalled, resetting PRAM etc. is probably a waste of time. Meanwhile, don't sleep your monitor.

  • Mac pro wont wake up from sleep

    mac pro wont wake up from sleep, now what?

    mac pro wont wake up from sleep, now what?

  • My mac won't wake up from sleep, what can i do

    My mac won't wake up from sleep, what can i do

    Can you say more about thermal cut-off?  My mac has beene having problems waking from sleep and I have noticed that I hear the fan running ever so slightly in the background.  When I depress the power button for a second the fan shuts off. 
    Just open the side an dlook to see which fan it is.  The lower fands are easy to see as well as the video card fan.
    When you push the power button and that fan goes off is the machine now fully off?  No power light?  No fans spinning?   Now drives spinning? 
    I don't recall what I did when my machine shut off with the one exhaust fan running.  I think the obvious thing I would have tried would have been to push power button for 10 seconds to shut it down fully.  That or actually pull the plug.
    When this happens the only way to use my Mac is to restart via the power button.
    Then I guess that answers the first question.  It must have turned off since pushing the power button again was the normal reboot.
       I can't find any helpful info on thermal cut-off so I was wondering if you could explain what it is, what causes it, and more importantly what I can do to fix it?
    That was my term for it.  What else could it be?  Without its fan video card would get extremely hot and throw off all that heat.  Whats the point of having temperature sensors in so many places other than to use that info to protect the machine against damage due to overheating?  So my assumption was card gets hot, sensor (probably the pci slot 1 temperature sensor) senses it, kills the machine.  It's also seems logical to me that the circuit(s) handling temperature overloads would want to keep a exhaust fan running to dump the heat out of the machine to further protect any damage from the heat.

  • Does anyone know what to do when a apple mac book pro screen won't wake up from sleep?

    Does anyone know what to do when a apple mac book pro screen won't wake up from sleep? I have tried to restart it and it still won't come on.

    Try this, which is located in your macbook pros user manual.

  • After installing iCloud mac does not wake up from sleep

    I have all of the necessary components and software for running iCloud however my computer will not wake up from sleep. I only get the gray sceen.  Any ideas?????

    You shouldn't need software (other than Lion).
    I'd reboot it and see if that gets around the issue.  It isn't supposed to do that.
    Press and hold the power button until the Macbook reboots.

  • My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

    For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Internet connection does not work when Macbook wakes up from sleep

    I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

    Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

  • Why does my macbook pro not wake up from sleep?

    I have a brand new Macbook Pro 13inch. It freezes up when I try to wake it from sleep. I was wondering if there is a fix for this.

    Hello,
    Thanks for visiting the Apple Support Community!  Have you performed all of the software updates on your MacBook Pro?
    To do this:
    1. Click the Apple Logo in the top left
    2. Choose "Software Update"
    3. Click "Check for Updates"
    Install any available updates and restart your Mac. Let us know if this resolves it or not.  Additionally, you have posted in the iPhone Discussion area; for future reference please post in the correct category.
    Thanks!

Maybe you are looking for