Whenever system does the forward scheduling for the external procurement ,

Dear Guru,
In one of plant i have a typical problem.
Whenever system does the forward scheduling for the external procurement , system does not takes Todays date (MRP Run date).
System simply sifted the requirement date by 30 days. and scheduled accordingly. In the expection message system shows the correct requirement date.
Please help.
Regards,
Sanjay

Dear ,
Can you let us know what value you're using for Scheduling when you carry out MRP run 1 or 2 ? Are you getting Planned Order while running MRP ? Wht is the Lot Size  are you using in the MMR-MM02-MRP1 view ? Wht is GR processing Time and PDT?
Check the following in your case :
1.Go to Transaction code omi4- Select the MRP lot sizeGo to the "Scheduling" in the Tab Lot size for the short term period-
Check the Scheduling indicator : Requirement Date =Delivery Date  in MRP Lot sizing Procedure in OM14.Basically ,this indicator defines the time in the period the system is to create the availability date or the start date for the lot for period lot-sizing procedures.
2.Goto OPPQ-Carry All Overall plant parameters -Order Start date in the Past -Check wether you are marked.
3.Goto -OMEW-Check the PR processing time in days
Regards
JH

Similar Messages

  • Does anyone know if my G3S Iphone will sync Itunes on my MAC Power PC G4, OSI0.4.11?  If it will, what operting system does the Iphone need?

    Does anyone know if my G3S Iphone will sync Itunes on my MAC Power PC G4, OSI0.4.11?  If it will, what operting system does the Iphone need?

    My apologies, I read your post the wrong way. I see now that the original poster was confused about the specs and you were simply responding with the appropriate info.
    I've gotten defensive after reading the forums. The forums are full of posters just looking to prove someone wrong or stupid, rather than being helpful. I shouldn't have assumed you were one of those people. Sorry.
    I did my homework and discovered that my PowerPC will run Leopard. It can be purchased for $129 by calling 1-800-MY-APPLE. This is much cheaper than replacing my laptop.
    I hope to upgrade my Mac soon, though! Can't believe this thing is still ticking. I love Apple.

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Disable forward scheduling for a specific material

    Hi experts.
    We have a requirement to disable forward scheduling for a specific material during ATP check in sales order and delivery processing. I played with some configurations in "Basic functions > Availability check and transfer of requirements" and "Basic functions > Delivery scheduling and transportation scheduling", but none could help.
    Notice: we use APO.
    Example:
    Material X - has 108 pieces in stock and a production order of 1000 pieces scheduled on Feb 11.
    If I place a sales order of 109 pieces with requested delivery date of Feb 8, I need the system to not confirm this quantity, instead of confirming the quantity on Feb 13, as of standard behavior.
    Regards,
    Fábio Scaravelli

    Unfortunately, I do not know much about APO. However, I had a quick look and saw the the function responsible for scheduling in APO is /SAPAPO/APO_SCHEDULING. Within this FM, there are two user exits called:
    EXIT_/SAPAPO/SAPLVCRM_001
    EXIT_/SAPAPO/SAPLVCRM_002
    I am unsure if these can be utilised to achieve the desired behaviour. However, they may be worth investigating.

  • I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to

    I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to do that?

    kahjot wrote:
    Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
    Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

  • System loading the external hard disk everytime

    Hello,
    I have a iMac 24" and a external LaCie 1TB Hard disk. The problem is that the system sometimes freeze loading something from the external hd whenever i open an application - for example Safari. I personally don't know whats being loaded, i assume it may be the fonts or whatever. I just don't know how to turn it off.
    How can i fix this problem and have my system running smooth?
    Oh, and for the record, the Time Machine is turned off.
    Thank you,
    Alex

    Do you mean you have your applications on an external drive, or do you mean launching documents from the external?
    If you think it's in the Safari load, remove any items in System Preferences > Accounts > Login Items, and test. If that not it try moving /Users/yourname/Library/Fonts to your desktop and restarting.
    Then do the same with /Library/Contextual Menu Items.
    Also Users/yourname/Library/Contextual Menu Items
    Also check /Library/Start Up Items.
    Test again and let us know.
    -mj

  • Why does the external drive not show up on the desktop.

    My wife has a G5 (iSight). When we turn on the external drive it does not mount. We have tried restarting the iMac with the external drive on and it still does not show up. What is the problem and what is the fix?
    Thanks

    Is it by chance a WD MyBook? They are known for problems like that. Could be the cable -- try a different one. Or it could be the Firewire port on the computer. Try a different port on the computer or on the external, if it has one. Have a look at this Apple article with other troubleshooting steps.
    http://support.apple.com/kb/HT1151
    Message was edited by: WZZZ

  • Does the external trigger of the 5152 count as a second channel?

    Hi everyone,
    The PXI-5152 digitizer is listed as providing a 2GS/s sampling rate (TIS) for one channel only.  My question is whether or not the External Trigger channel counts as a "second channel" when used during data acquisition.  If so, does this cause the maximum acheivable sampling rate to drop to 1GS/s for my data channel (CH 0)?
    My experience has been that this is the case, but I lack a smoking gun which explicitly states this.  When I use the external trigger to control data acquisition on Channel 0, I'm only ever able to acheive 1GS/s.  Am I making a mistake?
    I was hoping that the trigger port would act as a simple comparator.  If not, does this imply that the external trigger channel is being sampled at 1GS/s? 
    Many thanks,
    Jimmy

    Hi Jimmy,
    The External Trigger is not digitized and therefore is not a second channel. It is appropriate to consider it like a comparator.  It can be used as an analog trigger source for the TIS acquisition on channel 0 to achieve 1 channel at 2 GS/s.  I am not sure why you are only achieving 1 GS/s.
    I recommend starting with an example program such as "Configured Acquisition".  You can navigate to this example through the Example Finder, or by using your Start Menu and navigating to All Programs>>National Instruments>>NI-SCOPE>>Examples.  Select your preferred programming environment such as LabVIEW and locate Configured Acquisition.
    Once you have the example open try the following settings to achieve 2GS/s on ch0 triggered from the external trigger input. Set the sampling rate to 2GS/s, the channel to 0, check "TIS Enabled", and ensure that Enforce Realtime is also checked.  Set the trigger type to Edge, and the trigger source to the External Trigger.
    - Jennifer O.
    Product Support Engineer - High Speed Digitizers

  • Why does the external monitor on my MBPR constantly lose its signal?

    I have a Macbook Pro Retina, manufactured in August of 2012 (mid 2012). The laptop seems to be incapable of continuously driving an external display. On some monitors it will lose the signal once or twice a day; on my home monitor it will lose the signal many times an hour, sometimes taking minutes to "settle down". The effect is as if I had un-plugged and re-plugged in the HDMI cable. However I see this happen on three different monitors, two of which come in through HDMI and one through Thunderbolt. I even bought an apple monitor for $1000 that I returned, because on that one every now and then the MBPR just wouldn't detect it at all (and I would still see it quickly drop and re-establish the signal a few times an hour).
    Here is a video of what that looks like, as it flashes to blue repeatedly: https://dl.dropboxusercontent.com/u/19671563/IMG_1363.MOV
    I tried gfxCardStatus and using Discreet Only, no luck.
    The apple store guys were no help. They claim they have never heard of this issue even though I repro it *daily*. When I check the Console, this is the first message I always see during an incident (for the worst-performing monitor, at least):
    8/24/13 4:30:01.312 PM WindowServer[82]: Received display connect changed for display 0x3f003d
    I have tried every conceivable Display setting (Best for Retina display, Best for External display), and I am mirroring. I never had even a single problem on my older Macbook Pro; I have had problems since day 1 on my MBPR and they are getting worse (i.e., the external monitor is losing its signal more frequently every day).
    Can anyone recommend a solution or suggest a cause?
    Thanks,
    -Eric

    I have the same problem with my MacBook Retina 13... my LG monitor loose signal. Please help!

  • HT202360 Why does email forwarding not work with external addresses?

    I have tried to setup an internal email account which is meant to forward emails to an external account.
    Under the account's mail options i have set "Mail should be: " to Forwarded and typed in the email address underneath. However, both with an external domain and the me.com domain it does not send the email. If i send an email directly from the accounts using my IMAP account the server has no problems sending the emails to the addresses.
    The results of running sudo serveradmin command mail:command = getAutoForward is:
    mail:<<id1>>:fwdAddress = "[email protected]"
    mail:<<id2>>:fwdAddress = "[email protected]"
    mail:<<id3>>:fwdAddress = "[email protected]"
    Is there sometime i'm missing?

    I have also tried adding a new email account with the [email protected] to see if it was the original account that was the problem, but the new email account doesn't send the emails on either.

  • System does not accept Cost Element on External Activity

    Hi Experts,
    I have maintained the cost element in network profile under the activity type. When I create external activity in project builder system populates the default cost element entered in network profile BUT when I maintain Material Group in activity detailed data, system removes cost element and issues a message "Enter cost element".
    System does not accept any cost element in the field. Please guide if there is some setting that I have missed
    Thanking in advance
    Warm Regards

    Via txn OBYC also check if the VBR entry with a blank valuation class is missing
    If so get your FI/MM consultant to advise the entry details with relevant cost elements

  • Playing video and running an Operation System in the external hard drive

    I am sorry that this question is not relevant to apple but I want to ask if I paly video or run an operation system on my external hard drive, will it shorten the life of my mac air or my harddrive.

    Probably not. That said anything can and will eventually break but what you are doing what these devices were designed to do. Relax and enjoy.

  • HT2518 my external hard drive isn't showing up on my Mac desktop.  Does the external hard drive need to be an apple one?

    I have recently bought a Mac Book Pro and I am trying to transfer my files from my old PC to the new Mac.  I have put my files onto an external hard drive but when I plug it into my Mac is doesnt show on the desktop? 

    Check the settings in the General tab of the Finder's preferences.
    (66178)

  • Can I maintain multiple locations for EP (External Procurement)

    I want that the material should be received in repair atorage location as per repairs requirement.
    But when I run MRP the material reservation is created for repairs storage location to get material from main storage location and a purchase requisition is created in main storage location to get material from vendor. I want that this requisition should be created with repairs storage location so that material will directly receive in repairs storage location.

    Hi Balaji,
    In production version you can maintain the issue SLoc & Receive SLoc. You can assign an existing production version to you purchasing info records (purchasing organisation data1 > version field).
    Via this maybe you can realize your idea.
    PLEASE FORGET...in case of subcontracting where we use BOM maybe it could be used...
    BR
    Csaba
    Edited by: Csaba Szommer on May 15, 2008 7:16 PM

  • Can anyone let me know how does the system calculate forecast strategy?

    Hi all,
    I am new in Demand planning,,  I can see a couple of Forecast strategy used in  the production. I would like to know how does the system does the calculation for the forecasting strategies like
    36     Median method
    13     Moving average
    94     Linear regression
    etc.
    Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
    Thanks
    Pooja

    Hi Pooja,
    The below link will contain the detailed list of all forecast strategies alongwith how
    it will be calculated alongwith the formulas
    http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
    Please confirm whether this helps you to resolve your query
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for

  • Error :  While applying the Patch 4440000

    Error :  While applying the Patch 4440000 FAILED: file igwprop.odf on worker  1 for product igw username IGW. When i check the worker log file i got this error The sequence IGW_AWARDS_S in the database is defined as: MINVALUE = 1 MAXVALUE = 214748364

  • Flickering on DVI external monitor connected to 2009 Macbook

    This is an ongoing an intermittent problem. At one point Apple phone support suggested that engineers are working on the problem but I haven't heard any updates. The problem is with a 2009 macbook (13 inch) connected to an apple display (from 2008) b

  • How do you determine file being used in DVD map?

    Hi On older idvd projects I sometimes want to check what version of a movie file it is using. I can't figure out how to reveal the information. Specifically, I'm looking for exact name of file being used and its location. Thank you for your help Phil

  • XMLType toobject return invalid number while providing the XML Schema/DTD

    We are exploring an option of converting XML into an oracle object and found toobject procedure that does the job. It works fine without XML Schema and provides XML data as oracle object. But it takes more time in parsing the XML since it uses canoni

  • SWF panel listener for changed selection

    In short, my question is as follows. Is it possible to create a listener which detects when the current selection in the Flash authoring tool has changed, and informs my SWF panel? This does not have to be a listener per se, it can be some hand-craft