Where a system saved a old ABC indicator

Dear expert Hi
We are working in our company with ABC indicator for cycle counting , Trans: MIBC
I will need to create a new Query when we can see what is the old ABC indicator and what is the new ABC indicator after we update a indicator with MIBC
Please you can explain where a system saved old ABC indicator (TABLE)?
Regards
Diana

Hi,
For a material master the ABC indicator is mentioned in the MM01 -MRP1 view screen
The table name is : MARC
where as in MBIC t.code if you change the CC indicator the CCindicator changes is indicated inthe same t.code in X. it is not stored in Table. It is stored in a structure.
actually the ABC indicator is stored in table MARC only
Regards
G.Ganesh Kumar

Similar Messages

Where does system preferences store old profile pictures?

I can still set it as my profile pictures, but i deleted it in the photobooth folder. its still got to be on there somewhere. Where is it?

for some reason it's in homedirectory/library/images/ichat recent pictures.

How do I access my iphoto library on time machine backup external drive using Lion, originally saved from old computer and system

how do I access my iphoto library on time machine backup external drive using Lion, originally saved off old computer and system. It's not letting me open the folder???

Once again here's how to restore an iPhoto Library from Time Machine:

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt

Where can I get an old Mac system disc

Where can I get an old mac system software (ver 4.2)

Which Macintosh model is it? If you could accept a newer operating system, a downloadable 6.0.3 (four disks) and other versions can be found here:
http://www.info.apple.com/support/oldersoftwarelist.html#system
See also the article below:
http://support.apple.com/kb/TA33972
Jan

When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

HT1947 Remote app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required. Where can I get the (old) version that runs on my IOS?

'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.

The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
This is standard for Apple. While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers. It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems. When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years. The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
As for app availability, Apple typically pulls old software versions from its site when new versions appear. If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual. Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer. If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy.

ABC indicator removal

Hi
Having some clarification cycle count indicator...
1) How to mass remove the ABC indicator set for the material master ?
ie, mass change from a indicator specified to blank field.
I believe this is kind of basic qsnts, really appreciated your support.
Thanks
MM

Hi,
Just tested this out in my system and it works. Here's what I did.
1) Execute MM17
2) Choose Fields Tab --> Search for MARC-ABCIN and then highlight and execute
3) Enter Material and Plant then execute
4) At the new values line, leave it blank then, click on carry out mass change button
5) Save
Even with CC Fixed indicator checked, I am still able to change the value to blank.
Hope this helps
Regards,
Nazrin

ABC Indicator sap PM

Hi PM gurus
I have a problem. I change a ABC Indicator value of Functional Locations to A via transaction IL02. However, when i get a report with transaction IW38, I dont see A value in ABC Indicator field in some of the Functional Locations. I am sure I have changed and saved the value of that field. What may be the reason? Do you have any idea? Thanks in advance

check the change history, maybe someone else has changed it again.

Mandatory check for ABC Indicator- MRP1 view

Dear All,
I want to make ABC Indicator mandatory for ROH material type and to the particular plant. How can I achieve this?
I tried to change in customization (Change 'Field selection for data screens' ), but its effecting other fields also. because in the field selection group 51 has so many other fields.
Should I have to create new field section group & field reference Or any other way? Need your valuable guidance.
Thanks.

hi Vijay,
if you want to control it thru configuration then you have to create a new field selection group and then you can make the ABC indicator mandatory.
you can also use the user exit in material master which will throw an error message at the time of saving of material master if the ABC indicator field is blank.
Regards,
Anoop singh

ABC Indicator field in PM MODULE

Hi gurus,
I have a problem. I change a ABC Indicator value of Functional Locations to A via transaction IL02. However, when i get a report with transaction IW38, I dont see A value in ABC Indicator field in some of the Functional Locations. I am sure I have changed and saved the value of that field. What may be the reason? Do you have any idea? Thanks in advance....

Hi,
The value shown on IW38 will be the ABC Indicator as recorded on the order. When the order was created this value would have defaulted from the functional location. If you later change the functional location value, that is not updated on existing orders.
You can change the ABC Indicator value directly on the orders location tab (provided it is not completed).
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

BDC- To add ABC indicator in MM02-- MRP1

Hi,
I am working on BDC- To add ABC indicator in MM02--> MRP1.
Problem -->
In some material+ plant - Reorder point is there. In this case I need to take additional 'BDC_okcode' for ENTER.
HOW CAN I DO THIS?
I tried it with 'Select statement' between the Perform statement, but it's not working?
IF wa_file-matnr IS NOT INITIAL.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-MATNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_field       USING 'RMMG1-MATNR'
                                    wa_file-matnr.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'MSICHTAUSW-DYTXT(11)'.
      PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(11)'
                                     'X'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-WERKS'.
      PERFORM bdc_field       USING 'RMMG1-WERKS'
                                    wa_file-werks.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BU'.
      PERFORM bdc_field       USING 'MARC-MAABC'
                                    wa_file-maabc.
      SELECT SINGLE minbe INTO v_minbe FROM marc
                   WHERE matnr = wa_file-matnr
                     AND werks = wa_file-werks.
      IF v_minbe GT 0.
        PERFORM bdc_field     USING 'BDC_OKCODE'
                                    '/00'.
      ENDIF.
    ENDIF.
    CALL TRANSACTION 'MM02' USING it_bdcdata MODE p_mode MESSAGES INTO it_msg.

Hi,
Try to use Bapi and see ..Please find the sample code.
LOOP AT t_itab INTO wa_itab.
    CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
      EXPORTING
        input        = wa_itab-matnr
      IMPORTING
        output       = wa_headdata-material
      EXCEPTIONS
        length_error = 1
        OTHERS       = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
prepare the follwing structres ( plantdata,headdata, plantdatax)       .
* Select the MRP view
    wa_headdata-mrp_view = 'X'.
* Call the Bapi to create the MRP view.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata       = wa_headdata
        plantdata      = wa_plantdata
        plantdatax     = wa_plantdatax
      TABLES
        returnmessages = t_return.
ENDLOOP
Regards,
Nagaraj

I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

renatocremonese wrote:
I want to use it for backing up my Mac.
It's good for that . . .
But also I don't keep all my stuff in my Mac.
But not for that.
This older and not day-by-day usage files I want to store in the time machine.
You can do that (see below), but how are you going to back them up? If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
Is it possible to split TC in two partitions.
No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space. See #Q3 in Using Time Machine with a Time Capsule.
But you still won't have backups of the stuff you put there.
You don't say what kind of Mac you have. If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
However, it sounds like you may have a laptop, where that's not going to be convenient. In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

Using iCloud, it seems like some documents in Keynote saved on iMac do not appear on iPad.....does it matter where they are saved on the iMac?

Using iCloud, it seems like some documents in Keynote saved on iMac do not appear on iPad.....does it matter where they are saved on the iMac?
They are saved on desktop........any thoughts?

Welcome to the Apple Community.
Documents saved to the desktop won't be shared to iCloud. Which operating system are you using on the Mac.

Authorization object for ABC Indicator

HI Experts,
May we know what is the Authorization Object we can use for ABC Indicator in Equipment?
Thanks,

Hi bonsai,
Sorry for delay response..
Authorization keys which you can use to set up authorization checks when you manually set or delete a user status.
After creating the status profile.create individula authorization key in the lower menu node where u hv created the User status .
Then assign the authorization key to the each status codes(Last column of the status profile).(Crete authorization key same as the status codes).
Then maintain the authorization key value in the field BERSL where u want to give the authority for change /Delete user status.
Regards
Dhiren

Where a system saved a old ABC indicator

Similar Messages

Maybe you are looking for