Where and how to enter plan data cost and profit center wise to get data in grr1

Hi Gurus,
Appreciate you can tell me where and how to enter plan amount cost center wise for cost elements and profit center wise for revenue elements????
So that we can get this data in grr1 report.....
Can we upload this planned data, if yes how??
Thank you

Hi..
If you use classic PCA, refer to Plan Data Transfer - Profit Center Accounting (EC-PCA) - SAP Library.
If you use new gl pca, refer to Transferring Plan Data from Controlling - General Ledger Accounting (FI-GL) (New) - SAP Library

Similar Messages

Data source for Profit center wise Receivables

Hi Friends,
Is there any data source/query for getting the Profit center wise Receivables and Cost center wise payables. please guide me to get the same.
Thanks in advance
Karthik

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for pass)

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)

Your email password.
iPhoto '11: Email your photos
Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
Make a selection from the: Default email reader pop up menu.

How to run automatic plan data transfer to Profit Center Accounting?

Can anybody help me telling how to transfer plan data automatically to Profit Center Accounting?
At the moment I use 1ke0 to transfer manually.

Hi,
You can the option in Customizong "Define Versions" > Settings for Fiscal Year > choose the Integrated Planning,
but if already exists planned data, set the indicator by tcode KP96.
Regards
Elza

Can any 1 tell me how to create budget journal and how to enter journal ?

hi all+
Can any one tell me how to create budget journal and how to enter journal against that budget ?+
Regards+
Yasir+

http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/gl/budjrnl.htm#index-Budget-journals-Entering--0
Enter budget journals to maintain an audit trail for your budget balances. You can use budget rules to calculate budget journal amounts automatically.
When you post budget journals, the journal amounts update existing budget balances. You can review and change your budget journals before posting them.
Attention: When you use budget rules in Journal Mode, General Ledger calculates the appropriate debit or credit needed to achieve the balance you enter for the account type.
Prerequisites
1. Define a budget
2.Open one or more years for your budget
3.Define a budget organization
4. Assign the "Entered" budget entry type to the accounts for which you want to enter budget journals
To enter budget journals for a single account:
1. Navigate to the Enter Budget Journals window.
2. Specify the Budget Organization for the account to which you want to budget. If the budget organization is password-protected, you must enter the password before you can enter budget journals.
3. Enter the Budget you want to update. You cannot use a budget that is frozen.
4. Enter the range of Accounting Periods to which you want to budget.
5. Enter the Currency of the budget amounts you are entering. The accounts must be assigned to the budget organization for this currency.
6. Choose Journal Mode from the region poplist to enter budget amounts in a journal format.
You can also use Single Row Mode or Worksheet Mode to enter budget journal amounts. However, you can only generate budget journals from these entry modes when you use the Enter Budget Journals window.
Additional Information: When you use Journal Mode, Balance Type is a display-only field. It displays Budget when you are entering budget journals. In the Enter Journals window, this field displays Actual when you are entering actual journals.
7. Enter or query the Account to which you want to budget. You can also switch to Worksheet Mode to easily query accounts, then return to Journal Mode to enter budget journals.
8. Enter a Debit or Credit amount for each period. Do not enter journal amounts if you want to use budget rules to calculate and distribute budget amounts.
9. Choose Create Journals to create a budget journal batch. If you are using budgetary control, you specify a funds action when you create the batch.

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash?

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash? My platform of DMS is 5.2.2

Hi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks

Vendor Ageing Report Business Area and Profit Center wise

Dear Experts,
I have a requirement where user wants a Report for Vendor Ageing Business Area and Profit Center wise.I checked Standard T Codes but the same were Business Area wise but i could'nt find Profit Center wise Report.If their is any standard functionality then please advice.
We are using SAP ECC 6.0 Classic GL with Spl Purpose Ledger active.Can someone please advice can i derive such a report through Report Painter.If possible please advice in details.
Your Valuable inputs shall be appreciated....
Regards
Rahul

Hi Durga,
Can you please elaborate further on the same how you are determining the Report in FBL1N.What are the prerequisited to be taken care of and some further details on the same.
My Bus Area is not as same as Profit Center eg
BA          PC
FXRT     RT0001 / 2 / 3
TMMG   TM0001/ 2 / 3
LTOB     LO0001/ 2 / 3
I checked in my system but we do not have the Program for the following T Codes
S_PCO_36000218 - Segment Receivables
S_PCO_36000219 - Segment Payables
S_AC0_52000887 - Profit Center Receivables
S_AC0_52000888 - Profit Center Payables
Regards
Rahul

Report for actual cost of WBS, Profit center wise

Hi Experts,
Do we have any standard report that gives the actual cost of WBS/Project with Profit center wise.
Thanks,
Krishna

Hi,
Thanks for your solutions.
But I m looking for the Profit center in the report (display screen), not in selection screen.
My scenario is like, the cost was posted to WBSE with X profit center/cost center in January, now I changed the profit center to Y for the same WBSE and posted.
Want to see thru which PC I have posted to WBSE and how much. So that I can reversal.
Thanks again.
Krishna.
Edited by: krishna.gujju on Jul 8, 2011 6:56 PM

WBS list ( profit center wise / Cost Center wise)

Hi All
I have a query on WBS elements, I needed a list of all the WBS elements, Profit center wise & Cost center wise(is it possible to get cost center wise list)..
I am using trans CN43N. Is it the correct report or is there anyother report I need to execute to get the list of WBS elements(profit / Cost centerwise)
Regards
Bala

It s simple to get that using SE16n..
Enter table MARC.. PRCTR is the field for profit cener.. Enter ur prof center and execute..you ll get the list of matreials under the profit center
ALso check ke5z...

How can we settle price diff. in profit center valuation to COGS acc?

Dear All,
We have activated multiple valuations/transfer prices.
We do perform cross company code material sale. We have assigned each profit center at company code level.
We have set transfer price variant in t.code 8kez and have customized accounts in Controlling-Profit Center Accounting-Transfer Prices-Settings for Internal Goods Movements -Define Account Determination for Internal Goods Movements.
We had got posting logic described in http://help.sap.com/erp2005_ehp_05/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Now after actual costing run price differences in profit center valuation were not transferred to next level as we expected.
They have stayed as not distributed at sender (company code) profit center level.
How can we distribute price differences in profit center valuation to COGS account of sender profit center defined due to
http://help.sap.com/erp2005_ehp_05/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm?
With best regards,
Kamila.
Edited by: Kamilana Zhakenova on Dec 25, 2011 10:56 AM

Dear Gurus,
There is an addition to post above.
Transfer price was defined in SD module in Sales and Distribution-Basic Functions-Pricing-Pricing Control-Define Condition Types.
Now it is taken during cross company code sale from scheduling agreement and invoice.
(Please, do not take into account that we have customized transfer prices in 8kez)
But the issue is price differences in profit center valuation settlement.
They do settle to the next level for receiver company code like in group valuation.
We need to settle them to COGS account at company code sender side.
How we can do that?
With best regards,
Kamila.
Edited by: Kamilana Zhakenova on Dec 26, 2011 11:37 AM

S_PL0_86000029- Profit Center wise Planning vs Actuals

Hello,
Currently we are using business area accounting. Also, we are using profit centers for various reportings. we are not doing any assessments / distribution cycles.
We have maintained the plan values through GP12N at Profit Center and Account level. Now, we are trying to generate the following report
S_PL0_86000029 - Financial Statement: Plan/Actual Comparison
In the above report, the system is allowing me to see the GL wise Profit Center break up. But we want Profit Center wise GL break up
Kindly guide us, how to generate the above report with a break up of profit center as header, below is GL code.
Regards
Anilkumar

I think you can only start it on a monthly base, individually.
Regards
Hein

Where and how to enter plan data cost and profit center wise to get data in grr1

Similar Messages

Maybe you are looking for