Where and how to set a security code for wi-fi connection

I am running OS 10.8.5 on my MacBook Air and have an Apple Wi-Fi personal connection. I havn't needed a security code for my network but we are trying to add a wi-fi connection to our Dish Network Whole Home system which consist of two receivers. In the set-up procedure it asked for a "Security Key" and we don't have one. I cannot find anything that will work in this step and it will not connect w/o one. I do not how to do this nor can I find an area for this option. Can anyone tell me how to do this ? The Dish Network "connection kit" is set up for wireless. I have tried the #'s on the modem itself and various others I found in the system preferences under wi-fi. I am at a complete loss here !!!!!!
Thank you in advance for your help b/c I KNOW there is someone out there that knows how to do this. And....it likely is a very easy thing to do - just not me !!

Contact Dish technical support since it is their product.

Similar Messages

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

Where and how can I purchase a CD for installation of 3.6.6?

I have dial-up Internet. After downloading 3.6.6, I cannot open it, due to "File is Corrupt". Where and how can I purchase a CD for installation of 3.6.6?
== Operating system ==
Microsoft Windows XP

You can't. This issue can be caused by anti-virus software. Try disabling it while you install Firefox. '''Do not forget to enable it again!'''

How do i set a security code for my credit card

How do i set a new security code for my credit card? My daughter is going over her set limit & i need to change the code again. I paid 19.99 last time to get her old i pod setup that is no longer working. Do i have to pay apple support again or is there some steps i can go through to set a new security code?

Log into yur account and change/add the necessary information
iTunes Store: Changing Account Information

IP address conflict help and setting up security code for access

Hi folks, I am about as non-technical as one can get. So I apologize in advance and thank you guys for your patience as everything you tell me will have to be spelled out for me.
Ques 1: I have one desk top computer with internet access through my cable TV provider. On it I have the Linksys WRT54G wireless router. We use two laptops.
Lately I've been getting an error message on my desktop saying there is an IP Address that is in conflict. My son often gets booted off line (on laptop) and so I'm guessing maybe it is his laptop that is in conflict. Please help me resolve this issue.
Quest 2: I would like to set up a security code for our wireless access so that other people will not be able to intrude upon our signal. Can someone walk me through this as well?
Thank you so much!
-Jen in NJ

The most common reason to get two identical IP addresses, is if you are using fixed LAN IP addresses incorrectly on your system.
Do you already use any fixed LAN IP addresses? If so, please state what fixed LAN IP addresses you are using, and also state your DHCP server range.
Rules for using fixed LAN IP addresses on Linksys routers:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Check all of your static LAN IP addresses. If you have violated any of the above rules for static LAN IP addresses, it could be the cause for your problem, and you should fix it before attempting any other router repairs or changes.
********* Wireless Security **********
Brfore proceeding with wireless security, you must get your IP address conflict problem solved. Please do the above first.
To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or the "Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default wireless settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2 in Win XP. Vista already supports WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

How to add "Done" button on Number pad? And how to set 00.00 format for UITextField?

1.) I am new to iPhone development. I have a small application & for that I need to add number pad but there is no "Done" button. I know we can get rid of that keyboard by clinking UIView but I want a separate button for this.
2.) My second question is how to set 00.00 format for UITextField as there is no decimal point available on number pad?

As to #1, you should study the iOS HIG - doing what you have in mind might be a good way to risk rejection and not have your app make it into the store.
#2:
On devices running iOS v4.1 and greater you can use the following:
myTextField.keyboardType = UIKeyboardTypeDecimalPad;
It is tricky (and perhaps not worth the trouble) if you are trying to support older iOS versions. Here is a link to the most popular solution.

How to set portal security context for a procedure

Hi, I have procedure that needs to call some of the PDK APIs (WWSBR_API), but outside the scope of the web browser, i.e, automatically via a DBMS_JOB or queue. There is no HTML outputted, but rather a log entry made to a custom table.
The schema that this custom pkg belongs has all the necessary grants made to it from provsyns so that it should run.
How do I programatically set the context of the portal security so as to make the PDK APIs think it has been invoked by a Portal Adminstrator or a user with sufficient privs to perform the actions against the PDK and therefore not bomb out with security exceptions? I have seen this documented quite some time ago, but cannot find the details.
Regards
John

You need to use the wwctx_api.set_context procedure.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk11scp.htm

Where and how do i get a battery for my macbook

yes, i just asked a question about batteries but i did not address this issue. where do i get a battery when i need a new one, how much are they, and who puts them in. if apple needs to put it in how long does it take them.
also when i keep my macbook plugged in while using it, that doesn't hurt the battery at all right?
thanx!

*"where do i get a battery when i need a new one"*
ummm... click the Store link at the top of this page
Otherwise: http://www.apple.com/buy/
*"if apple needs to put it in"*
You do it yourself. It takes 15 seconds
*"that doesn't hurt the battery at all right?"*
Nope

When, where, and how is a GUI event created for a Swing component?

Somebody please help me with this issue !
Heavy weight (AWT) components such as JFrame, JDialog, JApplet, and JWindow have
native peers. As I understand, the senario of event creation for such heavy components
is something like follows:
1. A mouse click happens in a heavy component.
2. The native platform (i.e. the OS) captures the mouse click event and
store it as a native event somewhere in the system.
3. java.awt.EventDispatchThread gets this message and translates the native message
into an AWTEvent. When creating the AWTEvent, AWT actually looks up a hashtable
for the reference to the heavy component from the reference to the native window.
The hashtable stores all the pairs of heavy components and their native peers ever
created during the session. Now the AWTEvent includes a reference to the "source"
component that generates the event.
4. java.awt.EventDispatchThread dispatches the AWTEvent to the heavy component
for furture processing.
As for light weight (Swing) components such as JButtion, no native peers are attached.
So, there is no mapping from native peers to light weight components.
After a mouse click happens over a JButton, how, when, and where is the corresponding
event created and finnally routed to JButton. Could somebody give a sketch of the
senario? Thanks a lot.

Basically for Swing components, it would have to figure out based on the size and location of the components which one the click happens in. One could simply know that this panel is so big and it has such and such components in it which are however big and located at whatever point. It's a matter of digging down through components to find the lowest (or would it be highest) one.

Where and how can I download free apps for my iPad

Hi, I just bought an ipad2. Can anyone tell me how can I download some free apps for my device?

If you go into the App Store through your iPad and look to the bottom of your screen, you'll see the words "Featured", "Genius", "Top Charts" and so on. Tap the "Top Charts", and it'll take you into the top Apps but they'll be split by "Top Paid" on the leftside of the screen and "Top Free" on the rightside of the screen. Click on the "Free" button of any App that you'd like to download. You can remove any App that you don't like, so don't be affraid to play around with new Apps.

Where and how can I get new maps for my Nokia 330?

Shortly after having bought my 330, I discovered a missing highway, hence I really need a map upgrade.
However, no map upgrade is available at Nokia's website, and neither is one at the Route 66 website. It looks like the maps are from Navteq and that I should buy a new one at Navteq's website, but the 330 isn't listed there.
So, am I true if I buy a new map from Navteq for my Nokia 330 running Route 66 Navigate 7?
Help would be greatly appreciated
Olivier

I have exactly the same problem of a very poor satellites level since the beginning.
I am also a little bit disappointing about the number of contact points to send back the GPS. When I bought the GPS, I was thinking that NOKIA will have a strong support, good sofware update, etc... Unfortunately, the GPS N330 is stopping to work at certain time, this is why now I understand the Reset button, so I have to reset it several time.
So I am not happy at all, and when I will have the opportunity I will buy another GPS from a manufacturer which is specialised with the GPS
For the small story, I bought at the same time a N70, and I am not happy also, as it cuts the running communication, it resets sometime without any explanation..
So it was the first times, but now hat will be the latest.

Where and How do I get the documentation for BADI --- HRWPC_PCR_APPR_NEXT

Hi,
Could anyone plz help me out in finding the documentation for the
BADI --> HRWPC_PCR_APPR_NEXT.
Thanks & Regards,
Deepak

Hi Deepak,
search on help.sap.com as per the version and release on which you are working currently..
http://help.sap.com/erp2005_ehp_03/helpdata/EN/00/173bcba8c54de3ba4ce23835860260/frameset.htm
also have a look on below thread...
Re: HRWPC_PCR_APPR_FORM BADI
also have look in google
http://www.google.co.in/search?hl=en&q=HRWPC_PCR_APPR_NEXT&meta=
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

HT204053 Hi I forgot my security codes for my personal information for credit card purchase for app purchases

How do I reset security codes for personal information when I Try to purchase apps? It's been awhile since I fill that out and there's no way I can retrieve that security codes

All downloads from iTunes are tied to the account that downloaded it, you can't re-download content via a different account. You checked the spam folder on yourr old account as well as the Inbox, and depending upon how long ago you did it, have you retried getting it reset : http://appleid.apple.com, then 'reset your password' ?

I am trying to update some apps but my ipad wont let me because it wants me to enter the security code for my credit card and I dont want to do that so how do i fix this?

I am trying to update some apps but my ipad wont let me because it wants me to enter the security code for my credit card and I dont want to do that how can i fix this?

Try temporarily disabling your firewall and antivirus.

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

Where and how to set a security code for wi-fi connection

Similar Messages

Maybe you are looking for