Where are installed FCS content files?

Okay, here is a really basic one for someone...
I installed FCS on an old machine, and left the content files on an external drive.
I installed the new FCS and I believe (if I read the instructions correctly) that new content files were stored on my internal drive by default. I don't think I selected a different location during the process.
My question is, where are all of the content files? I deleted the ones on the external drive. Just wanted to figure out if I had correctly installed the new ones... Thanks!

/Library/Application Support/Final Cut Studio

Similar Messages

Where are these unix executable files coming from and how do I recover the original text file?

where are these unix executable files coming from and how do I recover the original text file?

When you upgraded to Lion did you have AppleWorks installed on your mac?
Most of the AW documents can be opened by Pages 09 or Numbers 09 with most of the orginal format in tact. (I do not know if previouse verision will work) just open the AW file with both and see which one works best.
Text Edit will also open most of the AW files as well but will require a lot of work to restore them to their orginal format.
If you have AW Database documents then they are not supported.
These document show up as "exec icons", Kind: Unix Executagle File.
They also will show up as .cwk file if they are small files. I have a couple that were under 1mb that are shown as " Kind: AppleWorks Document" but will not open.
The only option to open AW database is to have AW installed on a mac with a pre-Lion OS to recover the file.

Just where ARE the site definition files?

I've just received CS4. I want to move it to my more powerful laptop when I install it. I know how to do that and I can move site files, but where are the site definition files? I really don't want to have to set up each site from scratch. Is there one (or more) files that are the name, url, location, id, password etc for each of the (many) sites in CS3?
don Carlos

To import/export site definitions (not site files):
On the old computer:
Site > Manage Sites
Shift click to highlight all site names
Export..
Same procedure on new computer then Import..

Where are all my sent files?!!

help, where are all my sent files?

Files that you sent with the new Adobe Send service can be found in the Sent Files listing -- at https://cloud.acrobat.com/sentfiles.
The old SendNow service has been retired. See: Adobe Send: Transition FAQ and Adobe SendNow

Where are SAPI 5 voice files stored in OS X?

Where are SAPI 5 voice files stored in OS X? I'd like to add others from commercial sites such as Ivona.com. Thoughts?
Ken
MacPro running Maverick 10.9.5

Hi,
I believe the folder is still in the same place, but it seems that the Home/Library folder is hidden (i.e. you cannot see a Library folder at all it if you go to Home). At least I can't
Try a search in Finder. Search for "mail" under "Library" (and select Kind > Folder). This should bring up a list of results from which you can get to the Mail folder. Hope that helps!
Best,
Pablo

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

Define "the Aperture files".
Read this concise guide.
The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals". Your Originals are never altered. What went in is what comes out.
Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file. This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture. There is no file saved to disk that is the full-size Image. Thumbnails are saved, and Previews are saved. These are JPG files, almost always smaller than the Original. They are not substitutes for the Image for the use you have.
When you need a file of an Image to use in another program, you export the Image from Aperture. "Export" means "Make me a file of this Image according to these file specs I'm providing". The way to get files of your adjusted Images is simple: create them by exporting. Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
Search the Web for information about transitioning from Aperture to Lightroom. Note that I say "transitioning". You cannot move a database from one format to another without significant changes, and likely some loss of information. Adobe provides a tool and some instructions. I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
As always, never use any computer file without having a back-up.
We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database. Just as a metaphor for any user contemplating transitioning to another digital asset manager: that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
HTH,
Kirby.

Where are "Braid Game" save files stored?

Hello!
I had Braid installed in my os x snow. I then went to preferences and copy everything related to braid I found there.
Now I've upgraded to Lion but have no idea where should I put those files in order for my new Braid.app recognize them as the previous files, and continue my game.
Any help?
Thanks!

When you import the plug-in, its contents are taken and put in a repository table. So when you go to operate on the plug-in, you don't need access to the filesystem of a particular OMS (of which you could have multiple), you only need access to the repository.
The easiest way to get at one of the report files is to export the plug-in and unjar the MPA it gets put in. The file naming will make it a little hard to figure out which is the file you want, but they'll all be there...

Where Are The Custom Preset Files Stored?

I deleted FCS 2 before installing FCS 3 and unfortunately all of my custom presets in Compressor were lost.
I have got Time Machine with the old Compressor but I don't know where the old preset files are stored.
Ideally I would like to copy them to the new version as re-writing them will be a pain, assuming I can still remember what they were!

Ian,
Now aren't you glad you went to the trouble of setting up Time Machine?

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

What dll do I use and where are the .h include files?

I recently downloaded the wavetek 271 drivers and have found that when imported (Lab View 6.0) that they need to be linked to a dll. But which one? And the includes call for the glib.h and other libraries where are they at. Are they compressed?
thanks

Hello-
There are two versions of this driver one for LabVIEW (NI's graphical language) and one for LabWindows-CVI (NI's text-based language). Be sure to download the proper type of driver.
In LabVIEW, the driver should be placed in LabVIEW\instr.lib.
In LabWindows-CVI, it's necessary to Load the driver from the Instrument>>Load... menu. The files should be placed in cvi\instr.
Randy Solomonson
Applications Engineer
National Instruments

Where are "documents to go" files stored when I perform a Hotsync with my windows xp system?

I just upgraded my palm OS to the latest version on my Treo 755p. Prior to upgrading I did a verizon wireless sync and a hotsync with my windows XP based PC. I list all my "documents to go" files that were stored on my phone. They did not reappear when I did Hotsync after the update. They were all supposed to be Hotsynced.
Where are these files stored on my computer? How do I avoid this from happening again?
Post relates to: Treo 755p (Verizon)

I have never seen a file like that in My Documents. If my doucments are lost how do I set up a file on my PC where the documents are stored when I perform a hotsync?
Post relates to: Treo 755p (Verizon)

Where are mobile Illustrator draw files stored for later use in Desktop Illustrator?

Hello,
who can tell me, where Mobile Illustrator draw vector files are stored for later use in Desktop Illustrator? In the cloud there are only .png and .jpg files. The Files are sent immediately to the desktop software, but when I want to use them later, I cannot find them anymore.

What exactly are your steps?
Create new file in Draw
Draw something
Send to Illustrator
... and then? Does Illustrator open on the desktop? What do you do with the Draw file?

Where are adobe reader log files?

Where are the log files for Adobe Reader?
When one of our clients opens a form off our liquid office server we receive an error. If possible I would like to find a log file that might give some sort of clue as to why this is happening. Thanks

I'll make an inquiry about that and if we have to contact liquid office at some point my guess is they may request that we do that if there is likely to be any useful information there. It is likely going to be pretty difficult as we have lots of clients opening forms constantly throughout the day.
I did find adobearm log file and also adobereaerbroker log file in the temp files on my own. So it does seem like reader logs some of it's activities. I haven't examined them completely yet but a quick comparison between a working machine opening our problem form and the one the computer that doesn't open it properly seems to show no obvious differences. They both seem to show problems with access denied and registry entries. However one works and the other doesn't even with the same issues in the log.

Where are the Download Excel Files going?

Safari 6 seems to download Excel files as requested from a web site but they do not appear anywhere in the Download Folder I have specified. The site successfully downloaded the files before I upgraded to Safari 6. I now have to switch to Firefox to download these files. Where are they going?

Erik Lommers (guest) wrote:
: What happened to the files? Yesterday I tried to download the
: different trunks of the ora805 file and suddenly everything
: stops.
: The ftp-server is there, but the whole linux directory is gone!
: Does anyone have an explanation?
: When will the files be available again?
Point your browser to:
http://www.oracle.com/products/trial/html/trial.html#oracle8
null

Flash 7 where are the library contents?

I am using Flash 7 and I need to free some images out of the
library for some other use. So where are those images kept because
i am not seeing how to do that with any library menus. When I try
to launch an external editor for these pictures, it says unable
because the original path from years ago is not there, as you would
expect. I do not want the original path, i want the actual photos
that are now in the actual library. Please advise, thank you

hmm, those images were removed from the hd long ago cuz i
thought they were imported into this mysterious library. I'm a
little hesitant to screen grab cuz the resolution is dependent on
the screen. I like pristine files.

Where are installed FCS content files?

Similar Messages

Maybe you are looking for