Where are my favorites, cookies, history and settings that were supposed to be transfered over upon install.
All my favorites, cookies, settings & history were supposed transferred over from my previous browser according to the install instructions. where are they???
Thanks Jon for your response - at least I know I didn't misplace any parts while putting back together. I'm probably going to strip it down again though, it just doesn't make sense. I agree that they can be temperamental but my other QS which only has a 867mhz processor I put into a 2002 motherboard (the old board had issues, so I replaced it with the newer version) has really given no problems since I first assembled it all together almost 2 years ago. And although I haven't completely taken it apart again, I have used it to troubleshoot various pieces of RAM, video cards, etc without any problems. Yes, it's picky about what PCI card goes where, but would just having a different processor on a similar motherboard cause such a glitche? And actually the only glitche has been this RAM bank thing - which does come and go when I move the door, so I must have missed something else when assembling it.
After reading through a number of other posts, I shut down and did another PMU reset with a piece of known good RAM in the bank - but to no avail - it still sounded the bong as if it was going to start, then shut down. So I unplugged it and carefully copper-brushed out the bank and blew it out, then started up with a piece of RAM in the dissenting bank (but none in the middle bank), into Open Firmware doing a NVRAM reset according to the Apple document. I booted into the drive running Leopard, put it to sleep without any waking freeze, then rebooted into the Tiger hard drive which I normally prefer to work from (I don't really see the hype about Leopard - I don't find any benefits from using it - I find it picky and next to impossible to search files with, without a big drama and extra work). Anyway, that's where I am now - typing this - so far, so good, but it's worked okay for a short time before after re-seating the RAM in that bank - a sleep and a reboot will be the defining moment.
Thanks again.
Similar Messages
-
How do I move bookmarks, cookies, history and settings from an old Firefox version to my new one
I have the previous version of my Firefox from an old computer now located on my C drive. I would like to move the bookmarks, cookies, history and settings to my new Firefox (it is an upgraded version on my new computer). When I click on the File drop down, the import section can not be opened because it is not active. I have dozens of bookmarks that I would like to have loaded in my new Firefox application. I would also like to have my passwords moved to the new Foxfire application. How do I get that to happen?
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
-
Please help, my calendar events are missing from iphone, ipad, and icloud that were there last week
I use the calendar on my iphone and I pad for my entire life, including work, everything for my boys and all of my hubbys appointments.
Last Friday was the last time that I inputed appointments into my calendar and everything previous was in there and on my ipad and icloud.
I went in this morning to check an appointment time for something next week and found that 99% of the events that I had scheduled since the beginning of the year are missing. And they are missing from my iphone, my ipad, my icloud, and no longer in my Yahoo calendar.
I am drfinately in a panic, i need these ....
Has anyone had this problem?
Can anyone tell me how to get them back pleaseWelcome to the Apple Community.
Check you aren't hiding them.
i.e. on the phone settings > mail, contacts, calendars > calendars > sync. -
When importing from Microsoft Internet Explorer I have successfully completed and clicked on finish. I am not finding my favorites under the Bookmarks tab. I have shut down Firefox and and restarted the browser and still not finding favorites. I also restarted the computer still not finding favorites imported from Microsoft Internet Explorer. How can I find the data imported from Microsoft Internet Explorer?
You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Show All Bookmarks).
If you can't find them in the "From Internet Explorer" folder then try this:
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Show All Bookmarks > Import & Backup > Import HTML: From File
See also:
* http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file") -
Alot of people say that FF4 is awesome, i want to upgrade to it but i can't risk losing my saved stuff, so before i proceed i need an answer.
Greasemonkey 1.15 runs in Firefox 27.0.1. I'm not familiar with the other one.
Extensions you install from the Add-ons site usually are updated automatically, or you can update them manually from the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then click the "gear" button and choose Check for Updates.
You shouldn't lose anything.
However, there was a change in Greasemonkey a few updates ago where data storage for scripts was moved out of the main Firefox preferences file (prefs.js) into separate storage compartments. Maybe there was a problem converting the old script data to the new format?? -
Where are all my pics from my iphone that are suppose to have been backed up in icloud
where are all my pics from my iphone that was suppose to be backed up to icloud?
Welcome to the Apple Community.
The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs.
Ensure the device is connected to your local network.
Start the restore from iCloud back up.
Allow the devices settings to restore (watch for the confirmation of completion).
As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
Wait for the time out confirmation.
Navigate to settings > iCloud and turn off contact syncing (keep contacts when prompted).
Reconnect the router to the internet and let the restore process complete.
Delete any iCloud contacts from iCloud.com on a computer.
Navigate to settings > iCloud and turn on contact syncing (merge contacts when prompted).
May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now. -
Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?
You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad. -
Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.
When you enable photo stream on your Mac, in imports photos currently in your photo stream. However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them. When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99). Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac. -
Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. Also I did change the default site to https://www.google.com. But no result.
Some times after some time, able click on new tab and did open any urls. But it is rare. Please help me on this issue. Because of this unable to work with QTP/UFT tool.
I am getting on top of the screen the below error -
Error on top the ie screen :
res:/ieframe.dll/acr_error.htm#google.com,https://www.google.com/ - Internet Explorer (Not Responding)
I am getting at the bottom of the screen the below error -
Error at the bottom of the ie screen :
A problem with this webpage caused Internet Explorer to close and reopen the tab.Hi,
Please refer to the following link to troubleshoot this issue:
http://msdn.microsoft.com/en-us/library/dn338138.aspx
Check the browser add-ons
Check the browser rendering mode
Then, please also make sure to install latest Windows Updates which might address this issue.
Update your anti-virus program and perform a security scan incase some virus cause this issue.
Yolanda Zhu
TechNet Community Support -
A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.
Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one. -
Where can I get the sample layout pages that were in the older CS Dreamweaver?
Where can I get the sample layout pages that were in the older CS Dreamweaver. You normally find them when you press "More" on the start screen and you see it on the "layout" section.
On the CC version you only get 2 out of the 20 that you used to get. How can I get them back?You can refer the threads below
http://forums.adobe.com/message/5491936#5491936
http://forums.adobe.com/message/3100218
http://forums.adobe.com/message/5096504#5096504
Please visit for more starter layouts http://helpx.adobe.com/dreamweaver/using/getting-started/templates.html -
Where do i get the free iWork download that was suppose to be released Thursday?
Where do i get the free iWork download that was suppose to be released Thursday?
iWork isn't free. It is free as an upgrade to those who have the Mavericks versions installed on their Macs when they upgrade to Yosemite. If you don't own iWork already, then they are paid apps on Yosemite.
-
I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.
Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
I am trying to open pptx files on my MacBook Pro and continue to get "No Text Converter is installed for this application" even though I have dowloaded several converters that were supposed to work and I just downloaded Apache Open Office 3.4.1 with no luck. I am able to open docx files with the converters I have installed but not pptx files.
The PPTX file type is primarily associated with 'Power Point' by Microsoft Corporation.
This is the new format for Microsoft Office documents.
It is a combination of XML architecture and ZIP compression for size reduction.
To open Office 2008 for Mac documents (format .xlsx, .docx, .pptx) in Office for Mac 2004, you must download and install the Open XML File Format Converter. This article describes how to obtain and install the Open XML File Format Converter for Mac.
more here:
http://support.microsoft.com/kb/968200
Instead of all that, and buying OfficeMac etc...
Try to see if the FREE LibreOffice suite will open the file on your Mac.
http://www.libreoffice.org/ -
Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!
Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Hi , When I executing the form Iu2019m getting this message error: Exception SYSTEM_ERROR Message ID: FPRUNX Message number: 001 ADS: Request start time: Fri Apr 24 01:23:05 CDT 2009(200101) Please help me to resolve the error. Thanks, Madhu chandan
-
I want to use CPU User% , CPU Sys%, CPU Idle% field in my report. This field is already displaying in tcode OS06-> Detailed Analysis menu->Display within server.Here date wise entry found. can anybody tell me how to retrive these values in my report.
-
Hi I create a form with 7.0 proff. and publish it on the Internet. Is it possible for an external wiever that has only Acrobat Reader, to fill out the form and return it as an attached file. Is it possible to save and print the filled out form. Jan
-
Using OpenCV FileStorage in LabVIEW
I'd like to use the OpenCV's FileStorage function in the LabVIEW. Mainly because I want to transfer a c++ project to a LabVIEW project. But in this case, i can't load the xml file. i tested it in a consolo project, it seems to work. here is the code
-
Bank Holiday; for Karl and everyone..
. . . . . . . . . . . . . . . . . . . . . . . . . . Here in the UK it's a holiday today ..though the weather's a bit dismal. And so, to cheer everyone up - and the thing to do on a dismal holiday is to go to the pictures, of course! - is Chuck Workma