Where are RUG Downloads stored from ZLM Server

In a ZLM environment used for patching SLES 10 and OES for Linux servers, if I run "rug -d" to just download new patches, where are the files actually getting downloaded to?
Sean

Sean,
by default they are stored in /var/cache/zmd/web before they are installed.
So I think you will find it there in. That cache directory can be set as a rug parameter. I guess you will not have modified it, but you can check it using this command:
# rug get cache-directory
Rainer

Similar Messages

Where are TREX index stored? TREX server File system? or KM repository?

hi, friends:
can someone tell me where are TREX index stored ?
in TREX server file system?
or in portal KM repository? file system or DB?
thank you
Carol

Carol,
TREX is a separate product. During installation and configuration of TREX you connect it to the portal. The search iViews of the portal will use the configured TREX server to do the actual search:
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/EN/a4/929d4206b70931e10000000a1550b0/content.htm
The index is stored on the TREX server: TREX/IndexServer/basepath/index=%(SAP_RETRIEVAL_PATH)/index
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/EN/4c/d91e40777cdd5fe10000000a155106/content.htm
br,
Tobias

Where are the SyncBOs stored in the server.

Hi,
I have created some SyncBOs in the SAP system. Now I want to take back up of them..
Can I know where are they stored in the server and how can I go about having there backup?
Waiting for some quick answers
Ankur

Hi Ankur,
Try this....
Go to the transaction merep_mig---->and in Transport Action tab select Download to File radio button -->and in Selection for SyncBO ID tab select required sync bo to down load.
Hope this help you.....
Regards,
Murthy

Where are movie downloads stored? And can I delete them after watching?

I downloaded a show to my Android & wanted to move it from internal storage to my sd card but i cannot find where the show is being stored so I can delete after Im done watching... Where is it?

You are unable to move it ( copyright reasons)

Where are the address stored from the Mail To field

In the Mail app you have in the To field recently used addresses. The most of these addresses are not stored in my Addressbook. Can anyone tell my where the recently used addresses are stored?

I had the same question and appreciated your answer.
I recently had to reload one of my computers from scratch due to a dead disk. I wanted to duplicate my address and mail from one computer onto the other. I transfered the file you mentioned along with the rest of the address book files, mail files and mail cache. Interestingly, the address book files and recent recipients data ends in 2007. No address that were sent to or address that were added after 2007 [the year] appear. In fact, the file you noted says it was last opened in 12/07
Any ideas?

HT203167 Where are kindle downloads?

Where are kindle downloads stored in an iMac?

As there is no info on this page:
http://www.amazon.com/gp/help/customer/display.html/ref=hp_macland_rects?ie=UTF8 &nodeId=200443870
I would try to look for any file or folder with the Kindle name using FindAnyFile

HT1391 Where are film downloaded from iTunes stored on an iPad?

Where are film downloaded from iTunes stored on an iPad?

They should be in the Videos app :
If they don't show in there then are they hidden by a film age rating in Settings > General > Restrictions ?

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

Where are pictures downloaded from email

Where are my downloads on my iPad air, especially downloaded docs and pictures fro yahoo mail? Thanks.

Tapping on a photo in an email should give you the option to "Save Photo" or, if there are more than one to save them all. Accepting that will copy the photo or photos to your Camera Roll and you can view and edit them in the Camera app.
Tapping on a different type of document should allow you to view the contents of that document. Tapping on it again should bring up a choice to "Open In..." and provide a list of apps on your iPad that will accommodate the type of document in question. So if you receive a Word doc Open In should bring up a list of all apps on your iPad that will open Word docs. I use the Pages app for those.
For PDFs I use iBooks.
For Spreadsheets I use the Numbers app.

Where are printer drivers stored in OS 10.8?

I am trying to set up a Epson Stylus Photo R3000 as a new printer on OS 10.8. The printer setup locates the printer and automatically selects Epson Stylus R3000 with the notation "The selected printer software is available from Apple. Click Add to download and add this printer." However, clicking on Add leads eventually to an error message: "Can't install the software for the EPSON Epson Stylus Photo R3000 because it is not currently available fromthe Software Update server." This result blocks me from setting up the printer.
I know the driver is part of the Epson driver software package that is installed with OS 10.8. I would like to select it manually. My question is where are printer drivers stored? How do I select a driver?
Thanks in advance!

While a bit of a stretch, you can download the entire Epson printer package from Apple and install it. This will include all drivers for all Epson devices as opposed to the one just for your system. The package is 1GB in size, but will include everything supported.
The package can be downloaded here: http://support.apple.com/kb/DL1398
This following knowledgebase article says your printer is definitely supported, so the driver should be in that package: http://support.apple.com/kb/HT3669#epson

Mail 2.1 recently stopped downloading messages from POP server

Hi there,
I am struggling with this one.
My mail has previously been workoing no problems, through a POP server (doctors.net.uk)
Since 26/06/06 it has stopped downloading messages from the server.
I can send mail from Mail no problem and it appears on the server.
The system preferences/network is fine.
The connection Dr tells me that it can access the account no problem.
The SOCKS proxy is not enabled.
I even altered the POP account preferences to delete all messages from the server older than 1 month (previously not enabled) whic it duly did without problem.
When I click get mail, it spins, there is no error message, but no new messages appear.
I have followed this with my POP account service who insist all is fine at their end.
Any ideas?
Thanks

Try this in case the problem is that Mail is actually downloading the messages but they are being incorrectly processed by the rules:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/.
3. Locate MessageRules.plist and move it to the Desktop. If there is a file called MessageRules.plist.backup, move it to the Desktop too. You may also see MessageSorting.plist files there; this is where Mail 1.x stored the rules, and they are no longer used by Mail 2.0, so just move them to the Trash if you see them.
4. Open Mail. As a result of removing the rules file, the junk filter will be disabled now. You may want to either tell Mail to go offline immediately after opening it, or shut down the Internet connection before opening Mail, to prevent it from downloading anything until the junk mail filter has been enabled again.
5. Go to Mail > Preferences > Junk Mail, enable junk filtering, and configure it however you wish.
6. Go online again if you went offline in step 4.
If the problem persists after doing this, then you know the rules have no bearing on it, and you may move the files on the Desktop back to the ~/Library/Mail/ folder, overwriting any files Mail may have created anew there (quit Mail first).
Note however that, if you want to test this with messages already on the server, you need to also remove the MessageUidsAlreadyDownloaded2 file again.

How to download files from Application Server of Unix o.s to local director

Hi All,
I am trying to download files from Apllication server of Unix operating Systems to local file in excel sheet format using a z-program.but whenever I am trying to use OPEN dataset ........
it is showing sy-subrc = 8.
Can I have any clew please.
Thanks in advance,
Regards,
AMEER.

Hi Sreekanth,
Thanks a lot for quick reply.I have to download that files from z-program only. I am giving you my code below.
*& Report ZTRAK_DOWNLOAD                                         *
REPORT ZTRAK_DOWNLOAD MESSAGE-ID ZCT                   .
SELECTION-SCREEN BEGIN OF BLOCK DOWNLOAD WITH FRAME TITLE TEXT1.
PARAMETERS :
       SERDIR LIKE RLGRAP-FILENAME DEFAULT '/usr/trak',
       LOCDIR LIKE RLGRAP-FILENAME DEFAULT 'C:\Trak'.
SELECTION-SCREEN END OF BLOCK DOWNLOAD .
SELECTION-SCREEN BEGIN OF BLOCK INFO2 WITH FRAME.
       SELECTION-SCREEN COMMENT 1(79) TEXT2.
       SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT3.
SELECTION-SCREEN END OF BLOCK INFO2 .
SELECTION-SCREEN BEGIN OF BLOCK INFO3 WITH FRAME.
       SELECTION-SCREEN COMMENT 1(79) TEXT4.
       SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT5.
        SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT6.
       SELECTION-SCREEN SKIP 1.
       SELECTION-SCREEN COMMENT 1(79) TEXT7.
       SELECTION-SCREEN SKIP 2.
       SELECTION-SCREEN COMMENT 1(79) TEXT8.
SELECTION-SCREEN SKIP 1.
       SELECTION-SCREEN COMMENT 1(79) TEXT9.
SELECTION-SCREEN END OF BLOCK INFO3.
*- Internal Table to output data in Excel
DATA: BEGIN OF tab_excel OCCURS 0,
        col1(50),
        col2(132),
        col3(255),
        col4(100),
        col5(100),
        col6(50),
        COL7(60),
        col8(30),
        col9(30),
        col10(30),
        col11(20),
        col12(15),
        col13(15),
      END OF tab_excel.
DATA: FILE LIKE RLGRAP-FILENAME .
DATA: W_DATASET(80).
INITIALIZATION.
TEXT1 = 'Download Reports'.
TEXT2 = 'The Program downloads the reports generated by Trak'.
TEXT3 = 'Utility from Server to Local PC.'.
TEXT4 = 'Check the following before executing the Program.'.
TEXT5 = '     1. A valid Server path is provided.'.
TEXT6 = '     2. A valid Local PC path is provided.'.
TEXT7 = '     3. Local PC has 10 MB free space.'.
TEXT8 = 'The report can be executed in the forground.'.
TEXT9 =
'The report should be executed after execution of Transaction TRAK'.
AT SELECTION-SCREEN.
IF SERDIR EQ ''.
MESSAGE E001(ZCT).
ENDIF.
IF LOCDIR EQ ''.
MESSAGE E002(ZCT).
ENDIF.
START-OF-SELECTION.
Download ABAP Development Summary Report
FILE = '\ABAP_Report_Developments.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAP_Report_Developments.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download BDC Development Report
FILE = '\BDC_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/BDC_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Development Summary Report
FILE = '\Developments_Summary_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Developments_Summary_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Enhancement Development Report
FILE = '\Enhancement_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Enhancement_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download field exit Development Report
FILE = '\Field_Exit_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Field_Exit_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Frequency & Purpose Report
FILE = '\Frequency_And_Purpose_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Frequency_And_Purpose_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Group Developments Report
FILE = '\FunctionGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Module Developments Report
FILE = '\FunctionModule_Developments_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionModule_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
FILE = '\Include_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Include_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download UserGroup Developments Report
FILE = '\UserGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Modified_Standard_SAP_Objects_Report
FILE = '\Modified_Standard_SAP_Objects_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Modified_Standard_SAP_Objects_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
*FILE = '\Include_Developments_Report.XLS'.
*CONCATENATE LOCDIR FILE INTO FILE.
*W_DATASET = '/Include_Developments_Report.dat'.
*CONCATENATE SERDIR W_DATASET INTO W_DATASET.
*PERFORM INIT.
Download SAP Script Developments Report
FILE = '\SAP_Scipt_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/SAP_Scipt_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Transaction Developments Report
FILE = '\Transaction_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Transaction_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download User Exits Developments Report
FILE = '\UserExits_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserExits_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download ABAP Query Developments Report
FILE = '\ABAPQuery_Developments_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAPQuery_Developments_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Functional Area Developments Report
FILE = '\FunctionalArea_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionalArea_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
MESSAGE S003(ZCT) WITH LOCDIR.
END-OF-SELECTION.
This routine checks whether file exists if yes downloads it to
the Local PC
FORM INIT.
OPEN DATASET W_DATASET FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
   IF SY-SUBRC <> 0.
      EXIT.
   ENDIF.
   READ DATASET W_DATASET INTO tab_excel.
   APPEND tab_excel.
   CLEAR tab_excel.
ENDDO.
     PERFORM DOWNLOAD_FILE.
ENDFORM.
This routine downloads the data in an XL format on local PC
FORM Download_File .
CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
                 FILENAME                = FILE
                 FILETYPE                = 'DAT'
            TABLES
                 DATA_TAB                = tab_excel
            EXCEPTIONS
                 FILE_OPEN_ERROR         = 1
                 FILE_WRITE_ERROR        = 2
                 INVALID_FILESIZE        = 3
                 INVALID_TYPE            = 4
                 NO_BATCH                = 5
                 UNKNOWN_ERROR           = 6
                 INVALID_TABLE_WIDTH     = 7
                 GUI_REFUSE_FILETRANSFER = 8
                 CUSTOMER_ERROR          = 9
                 OTHERS                  = 10.
    IF sy-subrc <> 0.
     message ''.       " Error in file transfer
    ELSE.
      CLEAR TAB_EXCEL.
      REFRESH TAB_EXCEL.
      FILE = ''.
      W_DATASET = ''.
    ENDIF.
ENDFORM.
I have created those files in Application Server running in another z-program in background mode.Then I am trying to download those files using above the program.I am creating those trak/Trak files manually and I can able to see those files in A.S level.But when downloading the same files I am facing the problem.
regards,
Ameer

Error in PDF Conversion while downloading file from application server

Hi,
I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
* event handler for data retrieval
EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
YEAR = REQUEST->GET_FORM_FIELD( 'yr' ).
W_IND = 'N' .
DATA : wa_zform16 type zform16.
DATA : file_path type string.
DATA : l_pdf_len type string.
DATA STR TYPE STRING.
DATA: OUTPUT    TYPE STRING ,
      L_XSTRING TYPE XSTRING ,
      APP_TYPE TYPE STRING.
DATA: PDF_TABLE TYPE RCL_BAG_TLINE.
DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF' into file_path
*PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
PHY_NAME_OUT = file_path.
OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
IF SY-SUBRC IS INITIAL.
DO.
    READ DATASET PHY_NAME_OUT INTO STR.
    IF SY-SUBRC IS INITIAL.
      CONCATENATE
          OUTPUT
          STR
          CL_ABAP_CHAR_UTILITIES=>CR_LF
      INTO OUTPUT.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
APP_TYPE = 'APPLICATION/PDF'.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT     = OUTPUT
            MIMETYPE = 'APPLICATION/PDF'
*            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
    IMPORTING
      BUFFER   = L_XSTRING.
CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
    EXPORTING
      OBJECT_S            = L_XSTRING
      CONTENT_TYPE        = APP_TYPE
      CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
      RESPONSE            = _M_RESPONSE
      NAVIGATION          = NAVIGATION.
Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
Can anyone please help me in this regard.
or is there any possibility from which i can download that file just like File transfer from BSP.
Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
waiting for your reply.....
Regards,
Gagan

Hi Raja,
I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
Regards,
Gagan

Downloading file from application server in Binary mode

Hi,
I am trying to read an application server file using open dataset in Binary Mode..
While downloading using gui_download method the file is getting truncated because of its size.
My questions are,
       How to increase the size of the internal table dynamically. Already tried using STRING type but it is not accepting.
       If I use the CHAR type with maximum length 65535 and if the length of the file is less than that then in the remaining spaces box like symbols are printed .
How can I achieve it.
Thanks & Regards,
NJ

TYPES: BEGIN OF type_download,
           data1 TYPE zchar20000,
           data2 TYPE zchar20000,
           data3 TYPE char3000,
           data4 TYPE char2000,
         END OF type_download.
DATA: lt_download TYPE STANDARD TABLE OF type_download,
        lx_download TYPE string,
        lv_filename TYPE string.
Read data from application server to internal table
OPEN DATASET p_p_ftappl FOR INPUT IN BINARY MODE.
IF sy-subrc = 0.
Read file
    DO.
      CLEAR lx_download.
      READ DATASET p_p_ftappl INTO lx_download.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      APPEND lx_download TO lt_download.
    ENDDO.
Download data to presentation server from internal table
    lv_filename = p_p_ftfron.
Download data from application server to PC
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
   bin_filesize              =
        filename                  = lv_filename
        filetype                  = c_bin
   append                    = space
      write_field_separator     = space
   header                    = '00'
   trunc_trailing_blanks     = 'X' "space "commented
   trunc_trailing_blanks_eol = 'X' "added
IMPORTING
   filelength                =
      CHANGING
        data_tab                  = lt_download.
*Exceptions deleted            .
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Close file
    CLOSE DATASET p_p_ftappl.
Edited by: NewJoinee123 on Mar 25, 2010 8:45 AM

Downloading file from application server to presentation server

Hi,
      We have a requirment to download file from application server to presentation server. The problem is while down loading, some of the filds showing some junk values. Instead of that junk values we have some Russian texts there. These Russian texts only coming as junk all other data is correct. The file in the appplication server is in .dbf format. We are downloading using WS_DOWNLOAD. file type is BIN and code page we didn't specified.
Thanks in Advance
Jijeesh.P.G
Message was edited by: Jijeesh.P.G
        Jijeesh P G

hi jijeesh,
   Welcome to SDN.
u can use to download file from application server to presentation server using the t/c CG3Y. in that it will ask the source file path and the target file path.
if u want to find the source file path in the application server, u can use the transaction AL11 to find that one.
Regards....
Arun.
Reward points if useful.

Where are RUG Downloads stored from ZLM Server

Similar Messages

Maybe you are looking for