Where are still frame captures saved?

When I do a Shift-E to do a still frame capture and export, Premiere Pro cs6 simply saves the current showing frame somewhere. Where is this file saved? Shouldn't there be a dialog box that comes up to show where you might want save the file? This is mysterious and I need help to figure it out.
TIA,
Ken

>in my first few days of using Premiere
You may want to visit the tutorial list in message #3 http://forums.adobe.com/message/2276578

Similar Messages

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

Still frame capture

In FCP10, when looking at a frame of video, I simply want a quick still frame captured. What is the most basic method to do this? Thanks.

Captured where, in FCP or exported? To export use Share save current frame. If it's not there add it to the share button in destination preferences. If you want it on the application use the freeze frame function.

Still frame capture script?

OK, I know that this is probably not something that everyone is just yearning for, but I can see it as helpful. So hear me out.
I have a ton of footage (DVCProHD) and I would like to capture a still frame (just the first frame will work) of each clip to use in an editing storyboard. What I want to be able to do is use the stills to match clips to my narration (this is for a docu) so that myself and my assistant editor can keep notes on what we are doing.
Anyway, does anyone know of a way to do this automatically, with a script or something?
Thanks
K

Captured where, in FCP or exported? To export use Share save current frame. If it's not there add it to the share button in destination preferences. If you want it on the application use the freeze frame function.

Where are settings and POV saved?

In version 7, Essbase options where saved as named constants in excel. Does anybody know where they are saved with SmartView? I am curious where the options are saved, but also the POV. If a workSHEET is copied, the POV doesn't go with it. If a wordBOOK is copied, they do. That leads me to believe that they are still saved in the excel file (workBOOK), but not inside the workSHEET.
Thanks in advance!

You can copy the POV from a previous sheet by using the "Import Metadata" option.
-Copy a sheet that has your POV already to a new sheet in the workbook.
-Select Hyperion->Import Metadata->Select your book and sheet with the POV you want to copy
-Refresh and the POV should come over
This works for sheets within a single workbook, I don't believe this works between multiple workbooks.
DQ

Where are custom equalizer settings saved on windows pc

Where are iTunes custom equalizer settings saved on my Windows 7 hard drive? I always backup the entire iTunes folder and use that to restore everything after reformatting my hard drive. Everything restores EXCEPT the custom equalizer settings. Which file contains my custom EQ settings, and where is it found?

Go to Edit>Preferences>Presets>Show Lightroom Presets Folder.
These folders are usually (see below) actually in the same folder called 'Lightroom' where your catalog lives.
If you back up the entire 'Lightroom' folder they should be there unless you have elected to put the folder elsewhere.
Either way 'Show Lightroom Presets Folder' takes one there.
You can copy and back it up seperately or as part of the greater 'ightroom folder' back up.
Tony Jay

Problem with rendering still frame capture in FCP7

I'm a hack, so let's keep that in mind as I ask this question....but I *did* try to look through the forum for a similar issue before I created this post.
My situation: I am pulling some HD video from a Canon Vixia into FCP and basically just piecing it together with some minor editing to match music beats, etc. for some local sports leagues. Generally I find no issues with FCP, although I've only been dabbling with it for a few months.
My problem: My latest creation here: http://anothermotherproductions.smugmug.com/Movies/2011-Lacrosse-sample-movie/17 693649_L5rr8X does something annoying. I pulled a still frame from the video clip to let it hang there for a few seconds. See the 1:01 mark. The still frame looks clear in FCP, but when exported (and I've tried a few different formats, like h.264, pro-res, and "sharing" it for iPod) the image is ugly - looks like a motion blur from an old TV or something.
I've checked that the last frame of the video clip is the frame BEFORE the still frame, so walking step by step through the sequence reveals a normal sequence of motion, with the final frame "hanging" there for a while because its the still frame.
Make sense?
Anyone have constructive input?
Thanks.

Thank you so much - that helped tremendously. Image looks great now, AND I learned something.

Where are my render files saved?

I have 4 Hard drives in my mac pro. All but the fourth is pretty full and one is my OS and apps. I started a new project on the 4th hard drive. My render files will also be saved on this 4th hard drive. Is that correct? If not where do I change the render file destination? For some reason I was working on this new project on the 4th hard drive and I got a message indicating that I was running out of room on my 3rd hard drive. I was a bit confused by this since this new project was started on the 4th hard drive. Another question is can I delete my old render files from a project but the project still remains entact? It would just have to be rerendered, correct? Thanks for any help you can give. you guys always seem to enlighten my amateur knowlege.
Scott

The 3rd dive will get down to mb's left. I deleted some render files from old projects on the 3rd hard drive so I am back up to 10 gb's. I am not trying to use the 3rd hard drive any more unless I have to access an old aperture library. When I go to the render files of a project, there are 3 files (high quality media, Peaks Data and thumbnail media). Can I delete all these render files without deleting the project or the contents of the project? Thanks again. You have always been a big help.

Where are Flash CS4 settings saved?

Anyone know where Flash CS4 settings are saved [folder
location]? Such as keyboard settings, preferences, commands, etc.?
I want to be able to back them up and copy them to another PC.
Thanks.

Anyone know where Flash CS4 settings are saved [folder
location]? Such as keyboard settings, preferences, commands, etc.?
I want to be able to back them up and copy them to another PC.
Thanks.

Where are iWeb pages stored/saved?

Hi all. I'm building my first website using iweb. there is one (of only 3 so far) page that is apparently corrupted. whenever i click on that page name in the sidebar, iweb crashes, so i can't delete it using the edit/delete page dialogue.
if i can find where my iweb pages are saved, i'll just go there and then drag the page to the trash....
thanks

The pages do not exist until you publish them. The elements that comprise the pages are stored in the Domain.sites2 file/package that's located in your User/Library/Application Support/iWeb folder.
Are there any messages in the Console regarding iWeb that might indicate what's causing the problem.
Aside from the above you can try the following: create a new site and drag the two working pages to it. Then click on the first site's folder icon and see if you can delete the entire site. If that works then all you need to do is recreate that one page.
Also be sure to make a backup of the domain file frequently. Saves a lot of rebuilding in case something goes south in that domain file.
OT

Where are the job options saved?

Hi, everyone,
We work in a writing group that is in several states and we're trying to document our current processes. We'd like to have access to each others job options files but we're not sure where they are located and how they are saved. One group is using FM 9 and another is FM 8, and the job options seem to be different. Is there a way to save the joboptions from FM 9?
Thank you so much for your help.
Susan

Hi Sheila,
Yes, the Distiller joboptions. We are using Distiller 9, 8, and 7 that comes with the Adobe Acrobat software. We are all on Windows XP and 7. I'm not very familiar with the joboptions, so I'm not an expert on how all of this works.
One writer said she is using the PDFX4 2007 job option, which appears to be the default with Framemaker 9. I think these files are hidden and only the customized options can be saved.
Susan

Where are the custom skins saved?

Hi,
I created a custom skin.
Is it saved as a file on the file system?
If yes, where can I find it?
Thanks,
Merav.

Hello there,
Here are the steps for mac.
1. Switch to desktop
2. Hold Option Key and click 'Go' Menu
3. Select the Library (Library is hidden by default and that's why we do this)
4. Go to Preferences>Adobe Captivate 6.0>Themes
5. Copy the .ini file which you want to distribute
6. Now, other user should put them in /Gallery/Themes. When they launch captivate it will be automatically copied to preferences folder.
It is not advisable to directly modify the preferences so ask them to place it in themes folder. If you think it is a good idea to include the skin as part of export preferences workflow, then please mail a feature request to [email protected]
Thanks,
Vish

Where are Folder Action Automators saved?

Does anyone know where Folder Action Automators are saved?
I've created a Folder Action Automator. When I clicked 'Save' I was not presented with a dialog, allowing me to choose where this Automator action is to be saved like I have been for other Automator actions I've created.
Ideas?
Thanks
-Soniq2

See if you can see it in /Users/USERNAME/Library/Workflows/Applications/Folder Actions/
Open the hidden Library via Finder, Go menu (hold alt) and select Library. That will get you into the user Library.
P.S.
You can hold cmd + click the file icon in the centre of the documents toolbar to see it's path.

Where are variants of report saved?

Hi All,
I have to copy a standard report RFTXJL02 and make some changes to it.
It has a field variant.
Now i want to know where the variants of this reports are saved.
Thanking in advance,
Rohit

Hi rohit,
1. use the program RKKBALVC
to copy variant
of one program,
to another program.
regards,
amit m.

Try to find where are 3D conversion settings saved

Hi,
Is there any other way to change these settings, differs from "Edit->Preferences->Convert to PDF"? Maybe there are saved in file or into Windows registry? I'm a programmer and trying to simplify 3D conversion for my users. Thanks!
Best regards, Dmitry

I am dealing with a similar issue. I would like to save a backup copy of my customized 3D conversion settings. What directory does this write to?

Where are still frame captures saved?

Similar Messages

Maybe you are looking for