Where are the Audigy 2 ZS Linux Drivers?????????????????????????????????????????

I Just recently installed Fedora core 4 on a partition on one of the Raids and discovered I cannot find a creative Audigy2 zs linux driver anywhere? I have found a all in one alsa driver set but so far no success, and i'd prefer not to use non certified drivers on the audigy2 due to hardware failing on me in the past because of bad drivers. Why is there a Linux section in the drivers area and no linux drivers? eh common if you haven't coded linux drivers after the ammount of time the audigy2 zs has been released for ... then why you guys are going to have to have the proverbial finger removed from the preverbial arse and support your customers ... I've seen 00's of questions in forums about creative drivers for linux ... if you guys are going to be racists and only code microsloth / bloatware then I think i'll be more than happy to chuck the audigy2 on the junk pile and use the evil on board ac '97 which HAS Linux drivers....
Totally Frustrated and fed up
:BumpMessage Edited by Isiah on -07-2005 :38 PM

Incase it helps ... specs for system follows:
3.2E skt-478 @ 4GHZ
Asus P4P800E Delexe
Corsair 4000 pro @ 490mhz Dualchannel,Liniar mode
Gigabyte 6600gt TFE @ 550mhz-core/.3ghz-ddr3 (yes its better than a 6800GT)
Audigy 2 ZS
2x WD 80GB SATA RAID0 60GB
2x WD 250GB SATA RAID2+0 500GB
40GB seagate IDE (Cacheing dri've)
gigabyte dvd-rw
dvd combo dri've
etc
etc
etc
Windows XP Pro Partition
Fedora Linux Core Rev.4 Partition
/w G.R.U.B boot control

Similar Messages

WTF!?!?!??!?!??! Where are the Audigy drivers?? ETA?? Anythin

Funny how Logitech supports any mouse that they have ever released with frequent software updates to boot.
Funny how my Audigy works perfectly in Ubuntu no thanks to Creative.
Funny how x-fi drivers seem to be getting released at a lot faster pace than Audigy ones.
And please any fanboys do not try to give me the "Vista sound architecture is so complex" crap, im sure a multi million dollar company is able to hire some competent programmers to be able to figure it out.

Here's my impression after talking to the guy who directed me to this forum, reading this forum, and hearing the gripes of a few other users....
Creative will continue to drag you guys along about some 'alleged' support promises until they are able to completely liquidate the inventory they are pushing on their ebay store. Once they have gotten rid of that excessi've inventory - they will quietly end of life the audigy series...then you will not even be able to?pay to get?support. They may try to milk it with the alchemy software, but I think they're realizing the only way folks are going to be?obtaining what they feel like they should not have to pay for - is to steal it...so they won't make much money off the majority of audigy owners there. Sucks, cuz they at least made an (half-assed) attempt at something
It wasn't until folks complained to ebay?that?Creative even bothered to take the vista certified logos off their ads on the ebay store.....surely decepti've to say the least. They are still trying to get 00 bucks for refurbed audigys!!!!
My advice, pawn those things off to someone you don't know or like, and run like hell from Creative's (lack of) support. Think of all the things you could do with the extra time you won't have to spend reading forums or screwing with non-working software!!!!!
Oh about the Ubuntu drivers....wouldn't it be great if creative would?allow?the incredibly?talented programmers out there?an opportunity to write some fully supported open-source drivers/software? Funny thing is, if they hadn't been so adamant about refusing to open up EAX for everyone - it may have seen some support in Vista.....Creative pulled a Sony and shot themselves in the foot big time.
</rant>

Where are the PC-CAM 600 Drivers?

The PC-CAM 600 is not listed on the Canadian website (which is where I purchased it). I need drivers for this product.

You can get the driver from here. Look under the Digital Cameras category.
http://asia.creative.com/support/downloads/
Jason

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where are the drivers?

Alright it's probably a stupid question but I just bought a new mac that came with leopard.I used boot camp to partition and install windows vista on my new mac. Everything worked fine until I had to install the drivers.I don't know where the drivers are. They supposed to be in the leopard dvd that i don't have. Where are the drivers?

Hi Obe7,
the Mac OSX install disc that you used to install Leopard on your Mac is a 'hybrid'-disc, which contains an OSX part (only visible while in OSX) and a Windows part (only visible while in Windows).
The BootCamp 2.0 drivers are on the Windows part of that disc.
While in Windows insert that disc and usually the driver installation starts automatically.
If not, use the Windows Explorer to navigate to the disc and start the 'setup.exe' file manually.
Stefan

Where are the print drivers found?

I have a Brother HL 2040 laser printer. THe Brother website has a version 2.2 driver for this printer. I downloaded and installed. When I add the printer I keep getting version 1.4 driver.
Can someone tell me where are the drivers found on my iMac?
Also I am trying to get this to print via a Linksys wireless print server. Do I use the ip address for the print server or the printer when adding this.
I tried using the print server IP but I get a "printer paused" issue. I think I need the new print driver.
thanks in advance for any help.

I have not gotten the driver to update to the newest version. I deleted the Brother Folders as mentioned in the replies, no joy. No matter what I do it ends up 1.4 not 2.0.
Version 1.4 worked OK for a USB connection, so I went forward with trying to get the network connection going. By trying every combination available I got it to work.
What HP jetdesk-socket has to do with my printer...escapes me. But that combination with version 1.4 driver works.
I will leave well enough alone.
I have 2 other computer to update to SL.....maybe.

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

My DVD drive has stopped working. Where are the drivers for HP GH60L?

My DVD/CD drive has stopped working. Where are the drivers for HP GH60L? HP Pavilion Elite HPE-350T.

Hi,
Please try the following first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

HP Officejet Pro 8600 Wireless Printer
Windows 7
Where are the printing shortcuts?????
I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos. So it was easy for our family to print, they would pick each setting.
Now with latest driver for 8600 there are NO way to save a set of settings for a printer. I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers. I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
Here is another posting with similar points -> Customers are NOT getting full print functionality. We don't care about the extra software, it is minimal. Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile). What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile. How is that helping?
As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings. With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it. Now you force me to change that each and every time.
If someone can explain why this is considered full functionality I would be extremely grateful.

Hello,
I am sorry you are having trouble with your print experience.
I am going to make some assumptions here, which could be wrong in your case, but might help others. Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ? The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide. The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue. Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken. If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location. For example, you can print from home to your printer at work. You can send photos of the kids to your mom's printer in another state, etc. The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer. One driver, one queue and you can print to any recent or new HP printer.
The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc). More may be added over time depending on demand.
BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com
I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
Good luck.
I am an HP employee, but these are my own thoughts and suggestions

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1

Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript.

When are the IdeaPad Y-Series Drivers coming?

Windows 7 is coming out in 4 days, Lenovo, where are the Windows 7 Drivers for the Ideapad series, namely the Ideapad Y530??
Solved!
Go to Solution.

The Windows 7 Y530 drivers are on the Lenovo Support site.
I don't work for Lenovo. I'm a crazy volunteer!

I have an Xfi Xtreme Music (not audio), where are the drive

I can't install any Vista drivers, except for older XP drivers.
Where are the drivers for my sound card?

chemistryman wrote:
On the driver downlad page, select soundblaster in the first box, then X-fi in the second, and you should see the Xtreme Music in the list. I found it by accident.Scott
No the driver were actually removed from the server yesterday. They are back today with a new release date (5march), but are actually the same drivers? Go figure?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

Where are the older BIOS versions gone?

Hi
A few weeks back, I've upgraded the BIOS on my Pavilion G6 1001sq to the latest version (F66). I noticed that the laptop is running considearbly hotter since then and I want to revert to an older BIOS version. When I go to the updates page on the HP website and click on "older versions available" I can only see the F66 version on the page I'm directed to ( http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-115746-1&cc=us&dlc=en&lc=en&os=4... ), although a long list with many versions was available till recently. Where are the older versions gone?

Unfortunately, I do not know where they have gone. HP is working on issues with the suport and driver servers at the moment.
Since your notebook does have the UEFI Diagnostics installed, you should be able to rollback to the previous version that was installed. Use the firmware management option to do that.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are the Audigy 2 ZS Linux Drivers?????????????????????????????????????????

Similar Messages

Maybe you are looking for