Where are the book marks located in the system files for Firefox. I would like to tranfere the bookmarks from one laptop to another.

I would like the transre my bookmarks from one laptop to another vie a flash drive. Can I do this with Firefox? If so where are the firefox system files where bookmarks are kept? Thank You

You may also be interested in ;
* [[What is Firefox Sync?]]

Similar Messages

I am changing computers, how do I move the bookmarks from one computer to another? WinXP Pro on both, FF $.0 on both. I have found the json file, now what?

I found the places.sqlite folder......it still will not accept the bookmarks from the other computer

There's too much above for me to specifically answer your questions, but I'll assume from the title that you're basically trying to sync to a new computer. So here are some articles to help you.
iOS: How to transfer or sync content to your computer
iTunes: How to move your music to a new computer

I NEED TO TRANSFER THE BOOKMARKS FROM ONE USER TO ANOTHER IN THE SAME COMPUTER??

I have created the recommended second user site on my computer.
Also I have Administrator user site on the same computer that I do not wish to use sometimes.
Both users are having the same Mozilla browser (win7) but the second user does not have bookmarks that the first user is having.
I am struggling already almost half a day by using all printed articles but WITH NO SUCCESS.
Please advise ma how to do it. I feel it should not be a big problem.
Thank you.
Norman

It can be tricky knowing how to locate and navigate between the different settings folders used by your different installations of Firefox.
To start, I suggest creating a folder that serves as a neutral location that Windows doesn't try to secure between users. For example:
C:\bmks
You can create a backup from the fully loaded copy of Firefox to that folder, then restore it into the empty Firefox. You've probably already found the procedures, but just in case, the following article describes both the manual backup procedure and the restore procedure:
[[Restore bookmarks from backup or move them to another computer]]
If you have bookmarks in the newer profile that you do not want to lose, you can use an alternate export/import procedure using an HTML file. This doesn't carry over all the same information (e.g., tags). These articles have the details, and again I suggest using a "neutral" folder:
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Import Bookmarks from an HTML file]]
Any luck?
When you're done, you can delete the contents of the neutral folder for privacy.

How can I move my bookmarks from one laptop to another without losing those on the destination laptop?

I have an older laptop that has a lot of bookmarks that I want to save onto a newer laptop. I've been told that I can move them easily enough, but that that procedure will wipe out the bookmarks on the destination laptop. How can I avoid that?

Your contacts should be on your computer.
You should have been syncing them with your computer from day one.
have you failed to do this?

Where are the bookmark records located?

I am buying a new PC. I wish to use the same profile in my new download of Thunderbird. I plan to copy my existing Thunderbird profile and to import it into the new PC, so I can begin using Thunderbird quickly and effortlessly.
Where are the bookmarks located, please?
Wayne Pfohl
[email protected]

How do "bookmarks" relate to Thunderbird?

HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

- The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
- What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
Yan

Hello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer.

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer. If I have a user name then where do I sign into Firefox, it should be that easy but I can't seem to figure it out.

Hey susanneyes,
Sounds like you want to set up Firefox Sync. This will allow you to keep all of your instances of Firefox synchronized. Just follow the steps in [https://support.mozilla.com/en-US/kb/what-firefox-sync?s=sync&r=0&as=s this article] and you'll be set.
Hopefully this helps!

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Need help for focusing the cursor from one textbox to another textbox

hii all,
I have a problem in java script.
Note:The textboxes are generated dynamically.it is not having fixed length.(the number of textboxes generated may be 3,2,4....etc.it is not fixed.
To move cursor from one textbox to another text box ,I have taken the length of the textboxes of the first column.I used onkeyDown event .
in the function ,first i checked the condition like
for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
if(event.keyCode==13)
form1.box[i+1].focus();
return false;
by using this the cursor is moving from first text box to second textbox and stops.
if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
if any one has solution please help me.
also if we can do in another way also,please help me.
thanx.>

thanx .u helped me so much.
i have to check another condition. see the code below
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> New Document </TITLE>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</HEAD>
<SCRIPT language="Javascript">
function fnTest(str) {
if(event.keyCode==13) {
if(str == 4) {
formHeader.box[0].focus();
else {
formHeader.box[parseInt(str)+1].focus();
return false;
</SCRIPT>
<BODY>
<FORM name="formHeader">
<CENTER>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('0');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('1');">
<br>
<INPUT TYPE="TEXT" name="box" value="0" disabled="false" onKeyDown="javascript:fnTest('2');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('3');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('4');">
</CENTER>
</FORM>
</BODY>
</HTML>
suppose if some of the fields are disabled,then the focus must skip to the next one.i have written disabled for box2.if the cursor focuses in box1,then the cursor should move to box3 escaping box2.
if u know plz tell me.

How do I transfer the data from one iPad to another

How do I transfer all of the data from one ipad to another one?

The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

Best Way to port the data from one DB to another DB using Biztalk

Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
Vinoth

Hi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit

Where are the book marks located in the system files for Firefox. I would like to tranfere the bookmarks from one laptop to another.

Similar Messages

Maybe you are looking for